Sharp AR-PE1 (serv.man32) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 057
Page: 9 of 16
g) Select Remote (LPR on IP). Click on Next.
h) Enter the IP Address that was assigned to the Fiery Print Controller. Type in the Printer
Name the Fiery queue name you intend to use (Print, Hold or Direct):-
for this example PRINT . Then click on Finish.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 057
Page: 10 of 16
i) A wait message appears while the printer agent loads.
Note: If you receive a message stating that the printer needs attention, click on OK and
go onto the next step.
go onto the next step.
j) Select the appropriate drivers that where loaded onto the server. Then click on
Continue.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 057
Page: 11 of 16
k) A confirmation window will appear. Confirm your choices and click on OK.
l) The Printer Agent will load and your printer will be listed as an object.
This completes the NetWare set-up portion of this bulletin. The next step is to install the
printer drivers on the client.
5) Installation of the Print Driver on a Windows 2000 workstation.
a) From the Start menu in Windows 2000, go to Settings and then Printers.
b) In the Printers dialog box, double-click Add Printer:
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 057
Page: 12 of 16
c) The
Add Printer Wizard will appear. To begin installing a new printer, click Next:
d) Select Network Printer and click Next:
Click on the first or last page to see other AR-PE1 (serv.man32) service manuals if exist.