AR-NB2 (serv.man6). Unpacking and installation — Sharp Copying Equipment Service Manual (repair manual)

Model
AR-NB2 (serv.man6)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
69.77 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Unpacking and installation
File
ar-nb2-sm6.pdf
Date

View Sharp AR-NB2 (serv.man6) Service Manual online

AR-NB2
UNPACKING AND INSTALLATION
3 – 1
[ 3 ] UNPACKING AND INSTALLATION
1. UNPACKING
2. PACKAGED GOODS
3. INSTALLATION PROCEDURE
(FOR AR-M160/M205/5220 SERIES)
*
For installation to the model which is not AR-M160/M205/5220 series,
see the operation manual of the main unit or the service manual.
Turn off the main switch of the main unit and remove the power
plug of the main unit from the outlet.
1. Cut out the cut-out portions from the rear cabinet.
1) Cut out three cut-out portions from the rear cabinet using a cutter or
the like.
2) Use a Phillips screwdriver or the like to open a hole.
2. Attach the network expansion kit.
Connect the connector of the network expansion kit to the connector of
the main unit and put excessive harness into the cut-out portion in the
main unit.
Engage the two pawls on the rear of the network expansion kit with the
cut-out portions of the main unit and network expansion kit using the
supplied screw (3 x 14).
3. Connect the USB cable.
Connect the supplied USB cable to the Network expansion kit and the
main unit.
At this time, if AR-EB7 is installed, connect the cable to the upper con-
nector. If AR-EB7 is not installed, connect the cable to the lower con-
nector.
4. Connect the network cable.
Connect the network cable.
Insert the power plug of the copler to the outlet, turn the main
switch of the copler to the “ON” position, and then perfrom net-
work setting and software installation.
1
1
1
2
Display

Download Sharp AR-NB2 (serv.man6) Service Manual (Repair Manual)

Here you can view online or download Sharp AR-NB2 (serv.man6) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp AR-NB2 (serv.man6) Copying Equipment. Information contained in Sharp AR-NB2 (serv.man6) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).