Sharp AR-M620 (serv.man19) Service Manual ▷ View online
AR-M550/M620 SIMULATION 8 - 17
64
1
Used to check the operation of the
printer section (self-print operation),
(The print pattern, the paper feed
mode, the print mode, the print
quantity, and the density can be
optionally set.)
printer section (self-print operation),
(The print pattern, the paper feed
mode, the print mode, the print
quantity, and the density can be
optionally set.)
Operation test/Check
Operation
65
1
Used to adjust the touch panel (LCD
display section) detection position.
display section) detection position.
Adjustment
Operation
(Display/Operation
key)
(Display/Operation
key)
2
Used to check the result of the touch
panel (LCD display) detection
position adjustment. (The
coordinates are displayed.)
panel (LCD display) detection
position adjustment. (The
coordinates are displayed.)
Adjustment/Setup/
Operation data output/
Check (Display/Print)
Operation data output/
Check (Display/Print)
Operation
(Display/Operation
key)
(Display/Operation
key)
66
1
Used to change and check the FAX
soft switch functions. (Used to
change and check the functions
provided for the FAX soft switches.)
soft switch functions. (Used to
change and check the functions
provided for the FAX soft switches.)
Setting
FAX
2
Used to clear the FAX soft switch
function data and to set to the
default. (Excluding the adjustment
values.)
function data and to set to the
default. (Excluding the adjustment
values.)
Data clear
FAX
Data
3
Used to check the operation of the
FAX PWB memory (read/write).
(This adjustment is required when
the PWB is replaced with a new
one.)
FAX PWB memory (read/write).
(This adjustment is required when
the PWB is replaced with a new
one.)
Operation test/Check
FAX
Data
4
Used to check the output operation
of data signals in each data output
mode of FAX. (Used to check the
operation of MODEM. ) Send level:
Max. (Only when FAX is installed)
of data signals in each data output
mode of FAX. (Used to check the
operation of MODEM. ) Send level:
Max. (Only when FAX is installed)
Operation test/Check
FAX
Operation
5
Used to check the output operation
of data signals in each data output
mode of FAX. (Used to check the
operation of MODEM.) An output is
sent at the send level set by the soft
switch. (Only when FAX is installed)
of data signals in each data output
mode of FAX. (Used to check the
operation of MODEM.) An output is
sent at the send level set by the soft
switch. (Only when FAX is installed)
Operation test/Check
FAX
Operation
6
Used to print the confidential pass
code. (Used when the confidential
pass code is forgotten.) (Only when
FAX is installed)
code. (Used when the confidential
pass code is forgotten.) (Only when
FAX is installed)
User data output/
Check (Display/Print)
Check (Display/Print)
FAX
Data
7
Used to print the image memory data
(memory send/receive). (Only when
FAX is installed)
(memory send/receive). (Only when
FAX is installed)
User data output/
Check (Display/Print)
Check (Display/Print)
FAX
Data
8
Used to check the output operation
of various sound signals of FAX.
(Used to check the operation of the
sound output IC.) Send level: Max.
(Only when FAX is installed)
of various sound signals of FAX.
(Used to check the operation of the
sound output IC.) Send level: Max.
(Only when FAX is installed)
Operation test/Check
FAX
Operation
9
Used to check the output operation
of various sound signals of FAX.
(Used to check the operation of the
sound output IC.) An output is sent
at the send level set by the soft
switch. (Only when FAX is installed)
of various sound signals of FAX.
(Used to check the operation of the
sound output IC.) An output is sent
at the send level set by the soft
switch. (Only when FAX is installed)
Operation test/Check
FAX
Operation
10
Used to clear all data of the image
memory (memory send/receive).
The confidential data are also
cleared at the same time. (Only
when FAX is installed)
memory (memory send/receive).
The confidential data are also
cleared at the same time. (Only
when FAX is installed)
User data output/
Check (Display/Print)
Check (Display/Print)
FAX
Data
11
Used to check the output operation
of FAX G3 mode 300bps. (Used to
check the operation of MODEM.)
Send level: Max. (Only when FAX is
installed)
of FAX G3 mode 300bps. (Used to
check the operation of MODEM.)
Send level: Max. (Only when FAX is
installed)
Operation test/Check
FAX
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-M550/M620 SIMULATION 8 - 18
66
12
Used to check the output operation
of FAX G3 mode 300bps. (Used to
check the operation of MODEM.) An
output is send at the send level set
by the soft switch. (Only when FAX
is installed)
of FAX G3 mode 300bps. (Used to
check the operation of MODEM.) An
output is send at the send level set
by the soft switch. (Only when FAX
is installed)
Operation test/Check
FAX
Operation
13
Used to enter (set) the number of
FAX dial signal output test. (The dial
number set by this simulation is
outputted when the dial signal output
test is made by SIM 66-14 - 16. )
(Only when FAX is installed)
FAX dial signal output test. (The dial
number set by this simulation is
outputted when the dial signal output
test is made by SIM 66-14 - 16. )
(Only when FAX is installed)
Setting
Data
14
Used to set the make time in the
FAX pulse dial mode (10pps) and to
test the dial signal output. (The dial
number signal set by SIM 66-13 is
outputted.) Used to check troubles in
dialing and to check the operation.
(Only when FAX is installed)
FAX pulse dial mode (10pps) and to
test the dial signal output. (The dial
number signal set by SIM 66-13 is
outputted.) Used to check troubles in
dialing and to check the operation.
(Only when FAX is installed)
Setting/Operation test/
Check
Check
FAX
Operation
15
Used to set the make time in the
FAX pulse dial mode (20pps) and to
test the dial signal output. (The dial
number signal set by SIM 66-13 is
outputted.) Used to check troubles in
dialing and to check the operation.
(Only when FAX is installed)
FAX pulse dial mode (20pps) and to
test the dial signal output. (The dial
number signal set by SIM 66-13 is
outputted.) Used to check troubles in
dialing and to check the operation.
(Only when FAX is installed)
Setting/Operation test/
Check
Check
FAX
Operation
16
Used to check the dial signal (DTMF)
output in the FAX tone dial mode.
(The dial number signal set by SIM
66-13 is outputted.) The send level
can be set to an optional level. Used
to check troubles in dialing and to
check the operation. (Only when
FAX is installed)
output in the FAX tone dial mode.
(The dial number signal set by SIM
66-13 is outputted.) The send level
can be set to an optional level. Used
to check troubles in dialing and to
check the operation. (Only when
FAX is installed)
Setting/Operation test/
Check
Check
FAX
Operation
17
Used to check the dial signal (DTMF)
output in the FAX tone dial mode.
Send level: Max. Used to check the
operation. (Only when FAX is
installed)
output in the FAX tone dial mode.
Send level: Max. Used to check the
operation. (Only when FAX is
installed)
Setting
FAX
Operation
18
Used to check the dial signal (DTMF)
output in the FAX tone dial mode.
An output is sent at the send level
set by the soft switch. Used to check
the operation. (Only when FAX is
installed)
output in the FAX tone dial mode.
An output is sent at the send level
set by the soft switch. Used to check
the operation. (Only when FAX is
installed)
Setting
FAX
Operation
19
Used to back-up the HDD data into
the Flash memory (optional FAX
expansion memory: AR-MM9). (Only
when FAX is installed)
the Flash memory (optional FAX
expansion memory: AR-MM9). (Only
when FAX is installed)
Data transfer
FAX
Data
20
Used to read the back-up data by
SIM 66-19 to the SRAM. (Only when
FAX is installed)
SIM 66-19 to the SRAM. (Only when
FAX is installed)
Data transfer
FAX
Data
21
Used to print information related to
FAX (various registrations,
communication management, file
management, system error
protocol). (Only when FAX is
installed)
FAX (various registrations,
communication management, file
management, system error
protocol). (Only when FAX is
installed)
Adjustment/Setup/
Operation data output/
Check (Display/Print)
Operation data output/
Check (Display/Print)
FAX
Data
22
Used to adjust the handset volume.
(Only when the FAX is installed.)
(Only when the FAX is installed.)
Setting
FAX
Operation
23
Used to download the FAX program.
(Only when FAX is installed)
Not used in the market. (For
development)
(Only when FAX is installed)
Not used in the market. (For
development)
Setting
FAX
24
Used to clear the FAST memory
data. (Only when FAX is installed)
data. (Only when FAX is installed)
Clear
FAX
Data
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-M550/M620 SIMULATION 8 - 19
66
25
Used to register the FAX number for
Modem dial-in. (Only when FAX is
installed)
Not used in the market. (For
development)
Modem dial-in. (Only when FAX is
installed)
Not used in the market. (For
development)
Setting
FAX
Data
26
Used to register external telephone
numbers for Modem dial-in. (Only
when FAX is installed)
Not used in the market. (For
development)
numbers for Modem dial-in. (Only
when FAX is installed)
Not used in the market. (For
development)
Setting
FAX
Data
27
Used to register the transfer number
for voice warp. (Only when FAX is
installed)
Not used in the market. (For
development)
for voice warp. (Only when FAX is
installed)
Not used in the market. (For
development)
Setting
FAX
Data
28
Used to record voice messages.
(Only when FAX is installed.)
(Only when FAX is installed.)
Setting
FAX
Data
29
Used to clear data related to an
address book (one-touch
registration, program registration/
expansion, relay memory box
registration, each table content).
address book (one-touch
registration, program registration/
expansion, relay memory box
registration, each table content).
Clear
FAX
Data
30
Used to check the change in the
TEL/LIU status.
TEL/LIU status.
Operation test/Check
FAX
Operation
31
Used to check the relay operation.
Operation test/Check
FAX
Operation
32
Used to check the receive data (fixed
data) from the line.
data) from the line.
Operation test/Check
FAX
Operation
33
Used to check the signal (BUSY
TONE/CNG/CED/FNET/DTMF)
detection.
TONE/CNG/CED/FNET/DTMF)
detection.
Operation test/Check
FAX
Operation
34
Used to measure the communication
time of test image data.
time of test image data.
Operation test/Check
FAX
Operation
35
Modem program reloading (Only
when FAX is installed)
Not used in the market. (For
development)
when FAX is installed)
Not used in the market. (For
development)
Setting
FAX
Data
36
Used to check interface between
MFPC controller and MDMC. (Check
of the data line or the command line)
MFPC controller and MDMC. (Check
of the data line or the command line)
Operation test/Check
FAX
Operation
39
Used to set the destination
specifications.
specifications.
Setting
FAX
Specifications
Operation
60
Used to set the ACR data.
Setting
FAX
Operation
67
2
Used to check the operation of the
parallel I/F of the printer. (This
simulation is for production only, and
requires a special tool for execution.
Not used in the market.)
parallel I/F of the printer. (This
simulation is for production only, and
requires a special tool for execution.
Not used in the market.)
Operation test/Check
MFP controller
Operation
Interface/
Communicatio
n
Communicatio
n
11
Used to set YES/NO of the parallel I/
F select signal of the printer.
F select signal of the printer.
Setting
MFP controller
Operation
Interface/
Communicatio
n
Communicatio
n
16
Used to check the operation of the
network card.
network card.
Operation test/Check
MFP controller
Operation
Interface/
Communicatio
n
Communicatio
n
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-M550/M620 SIMULATION 8 - 20
C. Details
Operation/Procedure
1) Select the operation mode with 10-key.
2) Press START key.
The scanner performs scanning at the speed corresponding to the
operation mode.
operation mode.
Operation/Procedure
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
• The scanner (read) unit is in the home position.: "MHPS" section is
highlighted.
• The scanner (read) unit is not in the home position.: "MHPS" is nor-
mally displayed.
Operation/Procedure
1) Select the operation mode with 10-key.
2) Press START key.
The SPF repeat paper feed, transport, and paper exit at the speed
corresponding to the operation mode.
corresponding to the operation mode.
The operation can be stopped by [CUSTOM SETTINGS] key.
Operation/Procedure
The operating conditions of the sensors and detectors are displayed.
The active sensors and detectors are highlighted.
1
1-1
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the scanner (read) unit
and its control circuit.
and its control circuit.
Section
Optical (Image scanning)
Item
Operation
1
HIGH SPEED
High speed (220mm/s)
2
LOW SPEED
Low speed (110mm/s)
Press [START] key, and the
operation is started.
operation is started.
Press [CUSTOM SETTINGS] key, and scanning
is stopped.
is stopped.
1-2
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of sensor and detector in
the scanning (read) section and the related circuit.
the scanning (read) section and the related circuit.
Section
Optical (Image scanning)
Item
Operation
MHPS
Optical system home position
SIMULATION 1-1
SCANNER CHECK. SELECT 1-2, AND PRESS START.
1. HIGH SPEED
2. LOW SPEED
SCANNER CHECK. SELECT 1-2, AND PRESS START.
1. HIGH SPEED
2. LOW SPEED
1
SIMULATION 1-1
SCANNER CHECK. EXECUTING···.
1. HIGH SPEED
2. LOW SPEED
SCANNER CHECK. EXECUTING···.
1. HIGH SPEED
2. LOW SPEED
1
SIMULATION 1-2
SCANNER SENSOR CHECK..
MHPS
2
2-1
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the automatic
document feeder unit and the control circuit.
document feeder unit and the control circuit.
Section
DSPF
Item
Operation
1
HIGH SPEED (220 mm/sec)
High speed
2
LOW SPEED (110 mm/sec)
Low speed
3
TOP SPEED (360 mm/sec)
Top speed
Press [START] key, and the
operation is started.
operation is started.
Press [CUSTOM SETTINGS] key, and the
operation is stopped.
operation is stopped.
2-2
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the sensors and
detectors in the automatic document feeder unit and
the related circuits.
detectors in the automatic document feeder unit and
the related circuits.
Section
DSPF
Item
Operation
SSET
SPF sensor
SOCD
Open/close sensor
SCOV
Paper feed cover sensor
SPED2
Document set sensor (Lower)
SPED1
Document set sensor (Upper)
SPPD1
Document transport sensor 1
SPPD2
Document transport sensor 2
SPPD3
Document transport sensor 3
SPPD4
Document transport sensor 4
SPOD
Document exit sensor
SWDn
Document width sensor (n
→
1 (inside) - 6 (outside))
SPLSn
Document length sensor (n
→
1 (inside) - 2 (outside))
CISSET
CIS installation detection
STSET
Stamp unit installation sensor
STUD
Tray upper limit sensor
STLD
Tray lower limit sensor
SWD_LEN
SPF guide plate position (unit: 0.1mm)
SWD_AD
SPF document width detection volume output AD
value
value
SIMULATION 2-1
SPF AGING TEST. SELECT 1-3, AND PRESS START.
1. HIGH SPEED
2. LOW SPEED
3. TOP SPEED
2
SIMULATION 2-1
SPF AGING TEST. EXECUTING···.
1. HIGH SPEED
2. LOW SPEED
3. TOP SPEED
2
Click on the first or last page to see other AR-M620 (serv.man19) service manuals if exist.