Sharp AR-M35 / AR-M450 (serv.man9) Service Manual ▷ View online
AR-M350U UNPACKING AND INSTALLATION 6-2
2. AR-P14 installing procedure
<Before installation>
*
This installation procedure is provided for use with the AR-M350U/
M450U series.
*
To connect this machine to a network, a Print Server Card (NIC) AR-
NC5J must be installed to the multi-function controller board in
advance.
*
To enable the printer expansion function, the product key must be
acquired.
acquired.
The application number, machine serial number, and product key
number are important information.
number are important information.
Keep the above information for future reference.
1) Mount the printer expantion kit ROMs to the control PWB.
<1>Turn off the main switch of the main unit of the printer
<1>Turn off the main switch of the main unit of the printer
Turn the main switch located on the front side of the main unit to the
"OFF" position.
If the machine is equipped with a facsimile unit, also turn off the FAX
If the machine is equipped with a facsimile unit, also turn off the FAX
power switch.
Then remove the power plug from the outlet.
.
.
<2>Remove the cables connected to the control PWB unit.
Remove all the cables connected to the control PWB unit of the main unit
of the printer.
of the printer.
<3>Remove the control PWB unit.
Remove the five screws that fix the control PWB unit to the main unit of
Remove the five screws that fix the control PWB unit to the main unit of
the printer.
Then, hold the two grips and pull out the control PWB unit to remove it
from the main unit.
from the main unit.
<4>Mount the printer expansion kit ROMs(2 pcs.)to the control PWB.
Remove the ROMs(main and boot ROMs)from the control PWB and
replace them with the two ROMs(main and boot ROMs)of the printer
expansion kit.
expansion kit.
The main and boot ROMs are indicated with "MAIN" and "BOOT" on the
labels on the ROMs respectively.
When mounting the printer expansion kit ROMs, insert them to the same
When mounting the printer expansion kit ROMs, insert them to the same
positions in the same direction as those before replacement and ensure
that the inserted printer expansion kit ROMs are locked with the fittings
of the sockets.
of the sockets.
<5>Re-attach the control PWB.
Attach the control PWB to the main unit of the printer and fix it using five
Attach the control PWB to the main unit of the printer and fix it using five
screws.
( " #$%&'
AR-M350U UNPACKING AND INSTALLATION 6-3
<6>Connect the cables to the control PWB.
Connect all the cables that have been removed in <2> to the original
Connect all the cables that have been removed in <2> to the original
positions of the control PWB unit.
If another peripheral device must be installed, carry out the
following steps at the end of the installation work.
2) Turn on the main switch of the main unit of the printer.
Insert the power plug of the main unit of the printer to the outlet.
Then, turn the main switch located on the front side of the main unit to
the "ON" position.
the "ON" position.
If the machine is equipped with a facsimile unit, turn on the FAX power
switch.
3) Prepare to enable the printer expansion function.
To enable the printer expansion function, use the keys on the operation
To enable the printer expansion function, use the keys on the operation
panel to enter the product key.
For entry of the product key, see the key operator's guide of the operation
manual for the main unit.
manual for the main unit.
Carry out the network setting for the Print Server Card.
Use a key operator program to carry out the network setting for this
Use a key operator program to carry out the network setting for this
machine. For this network setting, the customer's network environment
must be checked. Consult the network administrator to carry out the
setting.
setting.
In addition to the network setting for this machine, to use the
machine in the network environment:
machine in the network environment:
According to the customer's network environment, install the driver
software from the CD-ROM supplied with this machine and use the utility
software supplied with the Print Server Card to set the network printer for
software supplied with the Print Server Card to set the network printer for
the server computer.
For installation in the server computer and network setting, see the
operation manual supplied with the main unit.
operation manual supplied with the main unit.
This setting must be carried out by the network administrator or based on
consultation with the network administrator.
4) To check the operation of the printer expansion function.
When the network settings and the driver settings are complete, perform
a test print to check if printing can be performed successfully.
(When test printing is completed successfully, use the "list print" key
(When test printing is completed successfully, use the "list print" key
operator program to print the network settings and keep the printout for
future reference.)
Installation of AR-P14 is now complete.
) " #$%&'
AR-M350U MAINTENANCE 7-1
[7] MAINTENANCE
1. Self print of set values
Use SIM 22-6 to print the set values (machine settings) and jam history.
These values must be printed before execution of maintenance or disassembly procedures.
2. Maintenance System Table
The maintenance system table is the same as that of the AR-M350/M450.
A. Scanner / DSPF
Maintenance cycle : 50K
Note 2: Replacement reference: Same as above or 2 years.
Check (Clean, replace, or adjust as necessary.)
Clean
Replace
Adjust
Lubricate
Move position
Unit name
Part name
When
calling
50K 100K 150K 200K 250K 300K 350K 400K
Remark
Optical section Mirror/Lens/Reflector/Sensors
Table glass/OC
White reference glass
Rails
Drive belt/Drive wire/Pulley
DSPF
Paper feed section
Take-up roller
Note 2
Separation pad
Note 2
Paper feed roller
Note 2
Transport section
PS roller
Exposure section
(Dust-proof glass)
(Dust-proof glass)
Paper exit section
Paper feed roller SPF
Other
Sensors
For cleaning, blow air.
Finish stamp section
[Option]
(Japan only)
[Option]
(Japan only)
Stamp solenoid
Stamp individual part
User replacement
at 10K or 1 year.
at 10K or 1 year.
!
AR-M350U MAINTENANCE 7-2
B. Engine section
*
For disassembly procedures, refer to the AR-P350/P450 Service Manual.
Maintenance cycle : 50K
Note 1:Replacement reference: Use the counter value of each paper feed port as the replacement reference.
Paper feed roller/Torque limiter section: 80K or 2 years
Check (Clean, replace, or adjust as necessary.)
Clean
Replace
Adjust
Lubricate
Move position
Unit name
Part name
When
calling
50K 100K 150K 200K 250K 300K 350K 400K
Remark
Drum peripheral
Drum
Installed when shipping
Cleaner blade
Toner reception seal
Side molt
Transfer roller
Discharge plate
TR bearing (F/R)
Transfer roller collar
After-transfer star ring
TR gear
Screen grid
(
)
Drum separation pawl UN
Charger case (M/C)
Charging plate
(saw teeth)
(saw teeth)
(
)
Developing section
Developer
Supplied when installing
DV blade
DSD collar
DV side seal F
DV side seal R
Toner cartridge
Attached when installing./
EX Japan: 814g,
user replacement for every 27K.
EX Japan: 814g,
user replacement for every 27K.
Fusing section
Upper heat roller
Lower heat roller
Upper separation pawl
Lower separation pawl
Thermistor
Clean and remove paper dust.
Upper heat roller gear
Paper guides
Gears
Cleaning roller
CL roller collar
Filters
Ozone filter
Paper feed section
Paper feed roller
Note 1
Torque limiter
Note 1
Transport section
Paper exit reverse section
Paper exit reverse section
PS follower roller
Transport rollers
Transport paper guides
Paper dust remover
Drive section
Specified position
Belts
Image quality
Other
Sensors
" !
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man9) service manuals if exist.