Sharp AR-M316 (serv.man17) User Manual / Operation Manual ▷ View online
11
BEFORE USING THE MACHINE
1
TOUCH PANEL
Using the touch panel
[Example 1]
Items on the touch panel
are selected by touching
the key associated with
the item. A beep will
sound to confirm that the
item was selected and
the key will be
highlighted.
* A double-beep is
are selected by touching
the key associated with
the item. A beep will
sound to confirm that the
item was selected and
the key will be
highlighted.
* A double-beep is
sounded when an
invalid key is touched.
invalid key is touched.
[Example 2]
Keys which are greyed
out cannot be selected.
out cannot be selected.
The confirmation beeps can be disabled in the key
operator programs. (See "Key operator's guide".)
operator programs. (See "Key operator's guide".)
The touch panel screens shown in this manual are
printed images and may differ from the actual screens.
printed images and may differ from the actual screens.
Selecting a function
[Example 1]
Items which are
highlighted at the time a
screen appears are
already selected and will
take effect when the [OK]
key is touched.
highlighted at the time a
screen appears are
already selected and will
take effect when the [OK]
key is touched.
[Example 2]
If you need to cancel a selection, simply press the key
once again so that it is not highlighted.
once again so that it is not highlighted.
The key is no longer
highlighted and the
selection is cancelled.
highlighted and the
selection is cancelled.
[Example 3]
When the machine is
used in copy mode or fax
mode and a special
mode is selected, a icon
representing the feature
will appear on the touch
panel. If this icon is
touched, the setting
screen of the function (or
a menu screen) will
appear, allowing the
settings to be checked,
adjusted, or cancelled.
used in copy mode or fax
mode and a special
mode is selected, a icon
representing the feature
will appear on the touch
panel. If this icon is
touched, the setting
screen of the function (or
a menu screen) will
appear, allowing the
settings to be checked,
adjusted, or cancelled.
JOB QUEUE
COPY
SHARP001
003 / 00
003 / 00
SETS / PRO
Beep
tone
1/13
COMPLETE
CANCEL
RIGHT
BINDING
LEFT
BINDING
OK
MULTI SHOT
1/
DUAL PAGE
COPY
MULTI SHOT
1/
DUAL PAGE
COPY
SPECIAL MODES
OUTPUT
2-SIDED COPY
READY TO COPY.
ORIGINA
A4
A3
ar_m318_uk_cpy.book 11 ページ 2007年1月15日 月曜日 午前11時36分
12
BEFORE USING THE MACHINE
Job status screen (common to copy, print, network scan and fax)
This screen appears when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job and the stored jobs or a list showing completed jobs can be displayed.
The contents of jobs can be viewed and jobs can be deleted from the queue. The following screen shows the job
queue for print jobs.
A job list showing the current job and the stored jobs or a list showing completed jobs can be displayed.
The contents of jobs can be viewed and jobs can be deleted from the queue. The following screen shows the job
queue for print jobs.
Job list
Shows stored jobs and the job currently being
executed. Touch one of keys
Shows stored jobs and the job currently being
executed. Touch one of keys
to
in the above
illustration to select the type of job. The icon next to
each job name indicates the mode of the job as
follows:
each job name indicates the mode of the job as
follows:
The jobs in the job list appear in the form of keys.
To give priority to a job or pause or delete a job,
touch the key of the job and then use the key
described in
To give priority to a job or pause or delete a job,
touch the key of the job and then use the key
described in
or
.
*
1
:"PAPER EMPTY" in the job status display
"PAPER EMPTY" in the job status display
indicates that the machine is out of the specified
size of paper. Add the specified size of paper. If
the specified size of paper is not available and
you are in printer mode, another size of paper
can be loaded in the bypass tray to allow printing
to take place. (See the "Online manual".)
indicates that the machine is out of the specified
size of paper. Add the specified size of paper. If
the specified size of paper is not available and
you are in printer mode, another size of paper
can be loaded in the bypass tray to allow printing
to take place. (See the "Online manual".)
Mode switching keys
Use to select the job list mode: "JOB QUEUE"
(Stored/currently executing jobs) or "COMPLETE"
(Finished jobs).
"JOB QUEUE":
Shows jobs that have been stored and the job that
is currently being executed.
"COMPLETE":
Shows the jobs that have been finished. Note that
copy jobs do not appear in this list.
If the power is turned off, or if auto power shut-off
mode activates when there are no jobs, the jobs in
the "COMPLETE" list will be erased.
Use to select the job list mode: "JOB QUEUE"
(Stored/currently executing jobs) or "COMPLETE"
(Finished jobs).
"JOB QUEUE":
Shows jobs that have been stored and the job that
is currently being executed.
"COMPLETE":
Shows the jobs that have been finished. Note that
copy jobs do not appear in this list.
If the power is turned off, or if auto power shut-off
mode activates when there are no jobs, the jobs in
the "COMPLETE" list will be erased.
[PRINT JOB] key
Use to view the list of output jobs for all modes
(print, copy, and fax).
Use to view the list of output jobs for all modes
(print, copy, and fax).
[SCAN TO] key
Displays a network scanner job (When the network
scanner function is installed.).
Displays a network scanner job (When the network
scanner function is installed.).
[FAX JOB] key
This displays stored fax jobs and the fax job
currently being executed (When the fax option is
installed.).
This displays stored fax jobs and the fax job
currently being executed (When the fax option is
installed.).
Display switching keys
Use to change the page of the displayed job list.
Use to change the page of the displayed job list.
[STOP/DELETE] key
Use to pause or delete a job currently being
executed, or to delete a stored job. Copy jobs and
received faxes cannot be paused or deleted with
this key. Copy jobs can be cancelled by pressing
the [CLEAR] key (
Use to pause or delete a job currently being
executed, or to delete a stored job. Copy jobs and
received faxes cannot be paused or deleted with
this key. Copy jobs can be cancelled by pressing
the [CLEAR] key (
) or [CLEAR ALL] key (
).
[PRIORITY] key
Touch this key after selecting a stored job in this
[JOB QUEUE] list to print the job ahead of the
other jobs.
Touch this key after selecting a stored job in this
[JOB QUEUE] list to print the job ahead of the
other jobs.
[DETAIL] key
Shows information on the selected job. This cannot
be used for a received fax.
Shows information on the selected job. This cannot
be used for a received fax.
JOB QUEUE
COPY
SHARP001
0666211221
STATUS
PAPER EMPTY*
1
003 / 000
PRINT JOB
SCAN TO
FAX JOB
JOB QUEUE
COMPLETE
DETAIL
PRIORITY
STOP/DELETE
WAITING
WAITING
003 / 000
010 / 000
1/1
SETS / PROGRESS
1
2
9
3
4
5
6
7
8
Copy mode
Printer mode
Network scanner mode
Fax mode
(Send jobs)
(Send jobs)
Fax mode
(Receive jobs)
(Receive jobs)
1
3
5
7
8
2
3
4
5
6
7
8
9
ar_m318_uk_cpy.book 12 ページ 2007年1月15日 月曜日 午前11時36分
13
1
POWER ON AND OFF
The power switch is located on the left side of the machine.
POWER ON
Turn the power switch to the "ON" position.
• When the power switch is turned to the "ON" position,
the message "WARMING UP. A COPYING JOB CAN
BE SET NOW." will appear in the message display and
the machine will start warming up. When "READY TO
COPY." appears, the machine is ready to copy. Copy
settings can be selected during warm-up.
BE SET NOW." will appear in the message display and
the machine will start warming up. When "READY TO
COPY." appears, the machine is ready to copy. Copy
settings can be selected during warm-up.
• If auditing mode is enabled, "ENTER YOUR
ACCOUNT NUMBER." will appear. When a valid
account number is entered, the account status will
appear on the main screen for several seconds.
Then copying can be performed. (See "Key
operator’s guide".)
account number is entered, the account status will
appear on the main screen for several seconds.
Then copying can be performed. (See "Key
operator’s guide".)
POWER OFF
When the machine is not used for a long time, be sure
to turn it off.
to turn it off.
Make sure that the machine is not in operation
and then turn the power switch to the "OFF"
position.
and then turn the power switch to the "OFF"
position.
If the power switch is turned off while the machine is in
operation, a misfeed may occur and the job that was in
progress will be cancelled.
operation, a misfeed may occur and the job that was in
progress will be cancelled.
When the power switch is turned on, the machine starts up in the previously used mode. The following
explanations assume that the previously used mode was copy mode.
explanations assume that the previously used mode was copy mode.
Note
ON
OFF
If the fax option is installed, be sure to keep the power turned on. Faxes cannot be received when the power is
turned off.
turned off.
Note
ar_m318_uk_cpy.book 13 ページ 2007年1月15日 月曜日 午前11時36分
14
BEFORE USING THE MACHINE
INITIAL SETTINGS
The machine reverts to the initial settings when it is first turned on, when the [CLEAR ALL] key (
) is pressed, or
the preset "auto clear time" elapses after the last copy is made in any mode. When the machine reverts to the initial
settings, all settings and functions selected to that point are cancelled. The auto clear time can be changed in the
key operator programs. (See the "Key operator’s guide".)
The initial settings that appear in the display are shown below.
settings, all settings and functions selected to that point are cancelled. The auto clear time can be changed in the
key operator programs. (See the "Key operator’s guide".)
The initial settings that appear in the display are shown below.
Functions and settings are explained based on the above screen as applicable.
Copy ratio: 100%, Exposure: Automatic, Copy quantity: 0, Automatic two-sided: One side to One side,
Auto paper selection: On,
Paper tray: Upper paper tray
Auto paper selection: On,
Paper tray: Upper paper tray
POWER SAVE MODES
The machine has two power save modes to reduce overall power consumption and thereby reduce the cost of
operation. These modes help conserve natural resources and reduce environmental pollution. The two power save
modes are "Preheat mode" and "Auto power shut-off mode".
The time settings for each mode can be changed in the key operator programs. (See the "Key operator’s guide".)
operation. These modes help conserve natural resources and reduce environmental pollution. The two power save
modes are "Preheat mode" and "Auto power shut-off mode".
The time settings for each mode can be changed in the key operator programs. (See the "Key operator’s guide".)
Preheat mode
When the set time elapses, the temperature of the fusing unit is automatically lowered to reduce power consumption
while on standby. The factory default setting is 15 minutes. To return to normal operation, touch any key on the
operation panel. To make a copy when the machine is in this mode, simply select the desired copy selections and
then press the [START] key (
while on standby. The factory default setting is 15 minutes. To return to normal operation, touch any key on the
operation panel. To make a copy when the machine is in this mode, simply select the desired copy selections and
then press the [START] key (
).
Auto power shut-off mode
When the set time elapses, the power to the fusing unit automatically turns off to reduce power consumption (This is
based on the guidelines of the International Energy Star Program.). The factory default setting is 60 minutes. When
the machine enters this mode, the touch panel screen turns off and only the [START] key (
based on the guidelines of the International Energy Star Program.). The factory default setting is 60 minutes. When
the machine enters this mode, the touch panel screen turns off and only the [START] key (
) blinks. To return to
normal operation, press the [START] key (
). To copy after warm-up starts, make desired copy selections and
press the [START] key (
). When the machine receives a fax or a print job, Auto power shut-off mode
automatically deactivates and the machine returns to normal operation.
The initial settings can be changed in the key operator programs. (See the "Key operator’s guide".)
For the initial settings (initial screen) of printer, fax, and scanner modes, see the operation manuals of those
modes.
For the initial settings (initial screen) of printer, fax, and scanner modes, see the operation manuals of those
modes.
OUTPUT
2-SIDED COPY
SPECIAL MODES
READY TO COPY.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
COPY RATIO
A4
0
A4
A3
Note
ar_m318_uk_cpy.book 14 ページ 2007年1月15日 月曜日 午前11時36分
Click on the first or last page to see other AR-M316 (serv.man17) service manuals if exist.