Sharp AR-M150 (serv.man6) User Manual / Operation Manual ▷ View online
SET UP THE SOFTWARE
43
5
13
When installation of Button Manager is finished, you will return
to the window of step 12 (p.42). Click the "Close" button.
to the window of step 12 (p.42). Click the "Close" button.
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
computer. Click the "OK" button.
14
Make sure that the power of the machine is turned on, and then
connect the USB/parallel cable (p.55).
connect the USB/parallel cable (p.55).
Windows will detect the machine and a Plug and Play screen will appear.
15
Follow the instructions in the plug and play window to install
the MFP driver.
the MFP driver.
Follow the on-screen instructions.
If the following screen appears during installation of Sharpdesk, click
the "Skip" button or the "Continue" button as appropriate to continue the
Sharpdesk installation.
the "Skip" button or the "Continue" button as appropriate to continue the
Sharpdesk installation.
If "Skip" is selected, the Sharpdesk installation will continue without
installing Sharpdesk imaging.
If "Continue" is selected, Sharpdesk Imaging will be installed. If Imaging
for Windows is installed on your computer, Sharpdesk Imaging will
overwrite Imaging for Windows.
installing Sharpdesk imaging.
If "Continue" is selected, Sharpdesk Imaging will be installed. If Imaging
for Windows is installed on your computer, Sharpdesk Imaging will
overwrite Imaging for Windows.
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
may appear. In this case, click the "Yes" button to restart your computer.
If the following message appears on your computer screen, close it.
A window regarding "HI-SPEED USB Device" will then appear. Close
the window.
This message appears when the machine's USB 2.0 mode is not set to
"HI-SPEED". For information on switching the USB 2.0 mode, see
Chapter 6, "PRINTER/SCANNER FUNCTIONS"
the window.
This message appears when the machine's USB 2.0 mode is not set to
"HI-SPEED". For information on switching the USB 2.0 mode, see
Chapter 6, "PRINTER/SCANNER FUNCTIONS"
(p.57)
.
Caution
Note
Caution
SET UP THE SOFTWARE
44
This completes the installation of the MFP driver.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.51).
Windows 98/Me/2000 (USB)
1
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
happens, click the "Cancel" button to close the window and disconnect the
cable.
2
Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 -
p.41).
p.41).
3
Click the "MFP Driver"
button.
button.
To view detailed information on
the software, click the "Display
Readme" button.
the software, click the "Display
Readme" button.
4
The "Welcome" window will appear. Click the "Next" button.
If you are running Windows XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway".
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway".
A "USB 2.0 Composite Device" installation window may appear prior to
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
The cable will be connected in step 9.
Caution
Note
Note
SET UP THE SOFTWARE
45
5
5
When you are asked how
the printer is connected,
select "Connected to this
computer" and click the
"Next" button.
the printer is connected,
select "Connected to this
computer" and click the
"Next" button.
6
When the interface
selection screen appears,
selection screen appears,
7
select "USB" and click the
"Next" button.
"Next" button.
If you are using the machine as
a shared printer on a network,
select "Connected via the
network". For more information
on this setting, see "Using the
machine as a shared printer"
(p.48).
a shared printer on a network,
select "Connected via the
network". For more information
on this setting, see "Using the
machine as a shared printer"
(p.48).
Follow the on-screen
instructions.
instructions.
7
You will return to the window of step 3 (p.44). If you wish to install
Button Manager or Sharpdesk, click the "Utility Software" button.
Button Manager or Sharpdesk, click the "Utility Software" button.
To install the Utility Software, see "Installing the Utility Software" (steps 12
and 13 on page 42).
If you do not wish to install the Utility Software, click the "Close" button.
and 13 on page 42).
If you do not wish to install the Utility Software, click the "Close" button.
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
computer. Click the "OK" button.
8
Make sure that the power of the machine is turned on, and then
connect the USB cable (p.55).
connect the USB cable (p.55).
Windows will detect the machine and a Plug and Play screen will appear.
If you are running Windows 2000 and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Yes".
regarding the Windows logo test or digital signature, be sure to click
"Yes".
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
may appear. In this case, click the "Yes" button to restart your computer.
Caution
Note
SET UP THE SOFTWARE
46
9
Follow the instructions in the plug and play window to install
the MFP driver
the MFP driver
Follow the on-screen instructions.
This completes the installation of the MFP driver.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.51).
Windows 95/98/Me/NT 4.0/2000 (Parallel)
1
The parallel cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
happens, click the "Cancel" button to close the window and disconnect the
cable.
2
Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 -
p.41).
p.41).
3
Click the "MFP Driver"
button.
button.
To view detailed information on
the software, click the "Display
Readme" button.
the software, click the "Display
Readme" button.
4
The "Welcome" window will appear. Click the "Next" button.
If you are running Windows 2000 and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Yes".
regarding the Windows logo test or digital signature, be sure to click
"Yes".
A "USB 2.0 Composite Device" installation window may appear prior to
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
The cable will be connected in step 10.
In Windows 95/NT4.0,
the "Utility Software"
button does not appear
and only the printer
driver can be installed.
the "Utility Software"
button does not appear
and only the printer
driver can be installed.
Caution
Note
Note
Note
Click on the first or last page to see other AR-M150 (serv.man6) service manuals if exist.