|
|
AR-FN3 (serv.man2)
ARFN3-Service Manual
Service Manual
|
54
|
3.04 MB
|
|
|
AR-FN3 (serv.man3)
ARFN3-Parts Guide
Service Manual / Parts Guide
|
35
|
3.09 MB
|
|
|
AR-FN3
ARFN3-Specifications
Service Manual / Specification
|
1
|
10.66 KB
|
|
|
AR-FN3 (serv.man22)
1.Change Of The Extension Wire Guide Of the AB Series. 2.Change Of The Left Exterior 1,2, F50. 3.Addition Of Finisher Mount Cover Fixing Screws. 4.Addition Of Lower Delivery Paper Guide Reinforcing Plate. 5.Change Of The Upper Staple Tray Unit And Paper Pressing Plate Unit. 6.Version Upgrade Of The CPU Of The Inch Series. (WHITE)
Service Manual / Technical Bulletin
|
5
|
422.49 KB
|
|
|
AR-FN3 (serv.man21)
1.Change Of The Installation Procedure Manual. 2.Correction Of The Omissions In The Parts Guide. (WHITE)
Service Manual / Technical Bulletin
|
3
|
160.15 KB
|
|
|
AR-FN3 (serv.man20)
1.Improvement Of The Delivery Gate 3 Operation. 2.Pusher Change. 3.Addition Of A Clutch Protection Sheet To The Clutch 30T. (WHITE)
Service Manual / Technical Bulletin
|
3
|
117.09 KB
|
|
|
AR-FN3 (serv.man19)
1.Change Of The Co-packing Form Of The Screws. 2.Change Of The Rear Shaft Support Plate, Bearing etc. 3.Addition Of Stapler Light Shielding Sheet. 4.Change Of The Feeding Paper Guide Upper. 5.Change Of The Photointerrupter. (WHITE)
Service Manual / Technical Bulletin
|
4
|
221.08 KB
|
|
|
AR-FN3 (serv.man18)
Change Of The Delivery Gate 3. (WHITE)
Service Manual / Technical Bulletin
|
1
|
78.19 KB
|
|
|
AR-FN3 (serv.man17)
1.Addition Carried Out Of A Spring To The Pressure Diffusion Section Of The Staple Tray. 2.Change Carried Out In The Shape Of The Paper Delivery Lower Paper Guide. 3.Change Carried Out In The Method Of Securing The Staple Tray Harness. 4.Change Carried Out In The No 3 Paper Delivery Tray. (WHITE)
Service Manual / Technical Bulletin
|
3
|
213.86 KB
|
|
|
AR-FN3 (serv.man16)
1.Change Carried Out In The ROM (Version 2.2I) Of The Inch Series. 2.Change Carried Out In The No.1 And No.2 Paper Delivery Rollers. (WHITE)
Service Manual / Technical Bulletin
|
2
|
147.98 KB
|
|
|
AR-FN3 (serv.man15)
Unification of inch series delivery paper guide part to AB series. (YELLOW)
Service Manual / Technical Bulletin
|
2
|
102.21 KB
|
|
|
AR-FN3 (serv.man14)
Stapler UN pin release lever service parts settings.
Service Manual / Technical Bulletin
|
1
|
84.52 KB
|
|
|
AR-FN3 (serv.man13)
Improvement of paper jam udulation caused by hardening of the delivery roller
Service Manual / Technical Bulletin
|
2
|
50.72 KB
|
|
|
AR-FN3 (serv.man12)
Parts change information
Service Manual / Technical Bulletin
|
1
|
31.04 KB
|
|
|
AR-FN3 (serv.man10)
ROM version upgrade
Service Manual / Technical Bulletin
|
1
|
30.01 KB
|
|
|
AR-FN3 (serv.man9)
ARFN1N FN3 De-curl roller change
Service Manual / Technical Bulletin
|
1
|
31.01 KB
|
|
|
AR-FN3 (serv.man8)
Revision of the parts guide for the ARFN3
Service Manual / Technical Bulletin
|
1
|
47.15 KB
|
|
|
AR-FN3 (serv.man7)
Paper skewing from offset tray when first installed
Service Manual / Technical Bulletin
|
1
|
98.12 KB
|
|
|
AR-FN3 (serv.man6)
Revised parts guide. (The information on the bearings, which are used for gears No. 49 and No. 82, has been left out by mistake in Section 6 of the parts guide. This section was revised and the necessary information was added)
Service Manual / Technical Bulletin
|
1
|
36.69 KB
|
|
|
AR-FN3 (serv.man5)
Supply of staple cartridges as service part
Service Manual / Technical Bulletin
|
1
|
141.55 KB
|
|
|
AR-FN3 (serv.man4)
Increase in strength of the rotary shaft of the paper entry guide.
Service Manual / Technical Bulletin
|
2
|
187.35 KB
|
