DOWNLOAD Sharp AR-FN3 (serv.man7) Service Manual ↓ Size: 98.12 KB | Pages: 1 in PDF or view online for FREE

Model
AR-FN3 (serv.man7)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
98.12 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Paper skewing from offset tray when first installed
File
ar-fn3-sm7.pdf
Date
PREV: Sharp AR-FN3 (serv.man6) Service Manual / Technical Bulletin

Sharp AR-FN3 (serv.man7) Service Manual / Technical Bulletin ▷ View online

AH17052002-1
Sharp Electronics (UK) Ltd., Technical Services Group
1. Model Name: 
ARFN3
2. Description:
When the finisher is first installed skewing maybe observed only from the offset tray this is
caused by either an earth strap (indicated by the yellow arrow to the right) being
incorrectly routed or a packing piece causing the plastic frame to bend slightly. This
causes the gap between the exit rollers (indicated by the red arrow to the left)  to increase
on one side.
3. Action:
If skewing is observed on installation check the gap between the exit rollers is even, if not
check the routing of the earth strap to ensure it is not pulling the rollers apart. If the earth
strap is not tight allow 2 to 4 hours for the paper guide to recover to its original position.
PAPER SKEWING FROM OFFSET TRAY WHEN FIRST INSTALLED
TECHNICAL BULLETIN
Date:
17 May 2002
Model: ARFN3
Ref.:
016
Colour: White
Page:
1 of 1
Display

Sharp AR-FN3 (serv.man7) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-FN3 (serv.man7) Service Manual ↓ Size: 98.12 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-FN3 (serv.man7) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-FN3 (serv.man7) Copying Equipment. Information contained in Sharp AR-FN3 (serv.man7) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

AR-FN3 (serv.man7) Service Manuals

Preview DownloadPagesSize
AR-FN3 (serv.man2) ARFN3-Service Manual Service Manual 54 3.04 MB
AR-FN3 (serv.man3) ARFN3-Parts Guide Service Manual / Parts Guide 35 3.09 MB
AR-FN3 ARFN3-Specifications Service Manual / Specification 1 10.66 KB
AR-FN3 (serv.man22) 1.Change Of The Extension Wire Guide Of the AB Series. 2.Change Of The Left Exterior 1,2, F50. 3.Addition Of Finisher Mount Cover Fixing Screws. 4.Addition Of Lower Delivery Paper Guide Reinforcing Plate. 5.Change Of The Upper Staple Tray Unit And Paper Pressing Plate Unit. 6.Version Upgrade Of The CPU Of The Inch Series. (WHITE) Service Manual / Technical Bulletin 5 422.49 KB
AR-FN3 (serv.man21) 1.Change Of The Installation Procedure Manual. 2.Correction Of The Omissions In The Parts Guide. (WHITE) Service Manual / Technical Bulletin 3 160.15 KB
AR-FN3 (serv.man20) 1.Improvement Of The Delivery Gate 3 Operation. 2.Pusher Change. 3.Addition Of A Clutch Protection Sheet To The Clutch 30T. (WHITE) Service Manual / Technical Bulletin 3 117.09 KB
AR-FN3 (serv.man19) 1.Change Of The Co-packing Form Of The Screws. 2.Change Of The Rear Shaft Support Plate, Bearing etc. 3.Addition Of Stapler Light Shielding Sheet. 4.Change Of The Feeding Paper Guide Upper. 5.Change Of The Photointerrupter. (WHITE) Service Manual / Technical Bulletin 4 221.08 KB
AR-FN3 (serv.man18) Change Of The Delivery Gate 3. (WHITE) Service Manual / Technical Bulletin 1 78.19 KB
AR-FN3 (serv.man17) 1.Addition Carried Out Of A Spring To The Pressure Diffusion Section Of The Staple Tray. 2.Change Carried Out In The Shape Of The Paper Delivery Lower Paper Guide. 3.Change Carried Out In The Method Of Securing The Staple Tray Harness. 4.Change Carried Out In The No 3 Paper Delivery Tray. (WHITE) Service Manual / Technical Bulletin 3 213.86 KB
AR-FN3 (serv.man16) 1.Change Carried Out In The ROM (Version 2.2I) Of The Inch Series. 2.Change Carried Out In The No.1 And No.2 Paper Delivery Rollers. (WHITE) Service Manual / Technical Bulletin 2 147.98 KB
AR-FN3 (serv.man15) Unification of inch series delivery paper guide part to AB series. (YELLOW) Service Manual / Technical Bulletin 2 102.21 KB
AR-FN3 (serv.man14) Stapler UN pin release lever service parts settings. Service Manual / Technical Bulletin 1 84.52 KB
AR-FN3 (serv.man13) Improvement of paper jam udulation caused by hardening of the delivery roller Service Manual / Technical Bulletin 2 50.72 KB
AR-FN3 (serv.man12) Parts change information Service Manual / Technical Bulletin 1 31.04 KB
AR-FN3 (serv.man11) Corrections to the parts guide Service Manual / Technical Bulletin 1 19.74 KB
AR-FN3 (serv.man10) ROM version upgrade Service Manual / Technical Bulletin 1 30.01 KB
AR-FN3 (serv.man9) ARFN1N FN3 De-curl roller change Service Manual / Technical Bulletin 1 31.01 KB
AR-FN3 (serv.man8) Revision of the parts guide for the ARFN3 Service Manual / Technical Bulletin 1 47.15 KB
AR-FN3 (serv.man6) Revised parts guide. (The information on the bearings, which are used for gears No. 49 and No. 82, has been left out by mistake in Section 6 of the parts guide. This section was revised and the necessary information was added) Service Manual / Technical Bulletin 1 36.69 KB
AR-FN3 (serv.man5) Supply of staple cartridges as service part Service Manual / Technical Bulletin 1 141.55 KB
AR-FN3 (serv.man4) Increase in strength of the rotary shaft of the paper entry guide. Service Manual / Technical Bulletin 2 187.35 KB

RANDOM: