Sharp AR-F151 (serv.man9) Service Manual ▷ View online
T. Solenoid
(1) Remove the reverse gate
1) Remove the ring
2) Remove the reverse gate
1) Remove the ring
2) Remove the reverse gate
NOTE: When reassembling, be careful of the groove and the hole
positions of the spring.
NOTE: When reassembling, hang 2) on the solenoid.
(2) Remove the solenoid.
1) Remove the screw.
2) Remove the solenoid.
1) Remove the screw.
2) Remove the solenoid.
14. FAX, MCU PWB section (AR-F151
only)
A. Remove the rear cover.
1) Remove four screws.
2) Hold the SPF sensor.
3) Remove the rear cover.
2) Hold the SPF sensor.
3) Remove the rear cover.
B. Remove the PWB cover FAX2.
1) Remove five screws.
2) Remove the PWB cover FAX2.
2) Remove the PWB cover FAX2.
C. Remove the FAX PWB.
Remove the connector.
1) Remove seven screws.
2) Remove the FAX PWB.
1) Remove seven screws.
2) Remove the FAX PWB.
1
2
1
2
1
1
1
3
1
2
1
2
1
1
1
1
1
2
1
1
1
AR-F151
7 – 28
D. Remove the PWB cover FAX.
1) Remove six screws.
2) Remove the PWB cover FAX.
2) Remove the PWB cover FAX.
E. Remove the MCU PWB.
Disconnect the connectors.
1) Remove seven screws.
2) Remove the MCU PWB.
1) Remove seven screws.
2) Remove the MCU PWB.
15. FAX-SPF section (AR-F151 only)
A. Remove the front and the rear covers.
1) Disengage three pawls.
2) Remove the front and the rear covers.
2) Remove the front and the rear covers.
B. Remove the metal fixtures.
1) Disconnect the connector.
2) Remove four screws.
3) Remove the metal fixtures F and R.
2) Remove four screws.
3) Remove the metal fixtures F and R.
C. Remove the FAX operation panel.
1) Remove the belt, the screw, and two connectors.
2) Remove the FAX operation panel.
3) Remove two screws.
4) Remove U-turn PG.
2) Remove the FAX operation panel.
3) Remove two screws.
4) Remove U-turn PG.
Wiring
2
1
1
1
1
2
1
1
1
2
2
1
2
1
2
3
3
3
4
3
2
1
1
1
AR-F151
7 – 29
D. Remove the FAX operation panel unit.
1) Remove five screws.
2) Remove the FAX operation panel unit.
2) Remove the FAX operation panel unit.
E. Remove the Fax panel PWB.
1) Remove eleven screws.
2) Remove the FAX panel PWB.
3) Remove the connector.
2) Remove the FAX panel PWB.
3) Remove the connector.
F. Remove the FAX sensor PWB.
1) Remove two screws.
2) Remove the FAX sensor PWB.
3) Remove the connector.
2) Remove the FAX sensor PWB.
3) Remove the connector.
G. Remove the PU solenoid
1) Remove two screws.
2) Remove the PU solenoid.
2) Remove the PU solenoid.
H. Remove the clutch unit.
1) Remove the E-ring.
2) the pulley, and the bushing.
3) Slide the bushing in the arrow direction.
4) Lift the clutch pawl.
5) Remove the clutch unit.
2) the pulley, and the bushing.
3) Slide the bushing in the arrow direction.
4) Lift the clutch pawl.
5) Remove the clutch unit.
I. Remove the clutch
1) Remove the E-ring.
2) Remove the parts.
2) Remove the parts.
2
1
1
3
1
2
1
1
2
3
1
2
A
1
5
2
4
3
1
2
AR-F151
7 – 30
J. Remove the pickup unit.
1) Lift the paper stopper.
2) Slide the pickup roller unit in the arrow direction.
3) Slide the bushing.
4) Remove the pickup roller unit.
2) Slide the pickup roller unit in the arrow direction.
3) Slide the bushing.
4) Remove the pickup roller unit.
(Note) When installing, hang the projection of the roller unit on the
solenoid arm.
K. Remove the manual feed roller and the pickup
roller.
1) Remove the parts.
2) Remove the manual feed roller.
3) Remove the pickup roller and the parts.
2) Remove the manual feed roller.
3) Remove the pickup roller and the parts.
L. Remove the transport unit.
1) Remove the connector.
2) Remove two screws.
3) Remove the document tray unit.
4) Remove four screws.
5) Remove the transport unit.
2) Remove two screws.
3) Remove the document tray unit.
4) Remove four screws.
5) Remove the transport unit.
M. Remove the belt.
1) Remove the belt.
N. Remove the SPF motor.
1) Remove the connector.
2) Remove four screws.
3) Remove the drive frame.
4) Remove the belt.
5) Remove two screws.
6) Remove the SPF motor.
2) Remove four screws.
3) Remove the drive frame.
4) Remove the belt.
5) Remove two screws.
6) Remove the SPF motor.
(Note) When installing, attach the belt as shown in the figure.
1
2
1
3
3
3
3
4
1
3
1
2
2
4
5
5
6
1
4
2
3
A
1
2
3
1
1
4
AR-F151
7 – 31
Click on the first or last page to see other AR-F151 (serv.man9) service manuals if exist.