Sharp AR-F12 (serv.man2) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-16
3.
Puncher Unit (option)
Figure 1-206
[1] Punch
motor
[6] LED
PCB
[2] Cam
[7] Horizontal
registration
motor
[3]
Hole puncher (Punch blade)
[8]
Scrap full detector PCB unit
[4] Die
[9] Punched
scrap
container
[5] Photosensor
PCB
[1]
[2]
[3]
[4]
[5]
[6]
[6]
[7]
[8]
[9]
CHAPTER 1 GENERAL DESCRIPTION
1-17
4.
Inserter section (optional)
Figure 1-207
[1] Tray
[6]
Transport
roller
3
[2]
Pickup roller
[7]
Transport roller 4
[3]
Feed roller
[8]
Transport roller 5
[4]
Transport roller 1
[9]
Transport roller 6
[5]
Transport roller 2
[10] Reverse roller
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
CHAPTER 1 GENERAL DESCRIPTION
1-18
III. Using the Machine
A.
Removing Paper Jams
from the Finisher Unit
from the Finisher Unit
If the host machine indicates the finisher
paper jam message, perform the following to
remove the jam.
1)
remove the jam.
1)
Holding the finisher unit as shown, move it to
detach it from the host machine.
detach it from the host machine.
Figure 1-301
2)
Remove any jam visible from the outside.
Figure 1-302
3)
Open the upper cover, and check the inside of
the finisher.
the finisher.
Figure 1-303
4)
Lift the buffer roller cover, and remove the
jam.
jam.
Figure 1-304
5)
Lift the buffer roller, and remove the jam.
Figure 1-305
CHAPTER 1 GENERAL DESCRIPTION
1-19
6)
Return the buffer roller and the buffer roller
cover to their original positions, and close the
upper cover.
cover to their original positions, and close the
upper cover.
Figure 1-306
7)
Connect the finisher to the host machine.
Figure 1-307
8)
Operate as instructed on the display.
B.
Supplying the Finisher
Unit with Staples
Unit with Staples
If the host machine indicates the finisher unit
staple supply message, perform the following to
supply it with staples.
1) Open the front cover.
supply it with staples.
1) Open the front cover.
Figure 1-308
2)
Shift down the blue lever.
Figure 1-309
3)
When the staple cartridge has slightly slid
out, hold and pull it out.
out, hold and pull it out.
Figure 1-310
Click on the first or last page to see other AR-F12 (serv.man2) service manuals if exist.