Sharp AR-CF1 (serv.man2) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-28
8)
Return the buffer roller and the buffer roller
cover to their original position, and close the
upper cover.
cover to their original position, and close the
upper cover.
Figure 1-353
9)
Connect the finisher to the host machine.
Figure 1-354
10) Operate as instructed on the display.
CHAPTER 1 GENERAL DESCRIPTION
1-29
H.
Removing Punched Scrap
from the Puncher Unit
(option)
from the Puncher Unit
(option)
If the display indicates a punched scrap full
state on the puncher unit, perform the following to
remove the punched scrap:
remove the punched scrap:
1) Open the front cover of the puncher unit.
Figure 1-355
2) Slide out the punched scrap container.
Figure 1-356
3) Discard the punched scrap.
Figure 1-357
4) Return the punched scrap container to its
original position.
Figure 1-358
CHAPTER 1 GENERAL DESCRIPTION
1-30
IV. MAINTENANCE BY THE USER
A.
Maintenance by the User
Table 1-401
No.
Item
Timing
1
Replacing the staple cartridge (finisher unit)
When the appropriate indication is made on
the host machine’s display.
the host machine’s display.
2
Replacing the staple cartridge (saddle stitch
unit)
unit)
Caution:
The finisher unit and the saddle stitch unit use different cartridge types. Be sure that the appropriate
type is used for each.
type is used for each.