Sharp AR-C200P (serv.man8) User Manual / Operation Manual ▷ View online
SETTING UP > 13
4.
Remove the four image drums and place them on a level
surface.
surface.
CAUTION!
>
Never expose image drums to light for more than 5 minutes.
>
Always hold image drum by the ends.
>
Never expose image drums to direct sunlight.
>
Never touch the green surface of the drum.
SETTING UP > 14
5.
Remove the protective sheets from each of the four image
drums.
drums.
SETTING UP > 15
6.
Replace the four image drums into the printer making sure
each image drum is installed in its correct colour location.
each image drum is installed in its correct colour location.
7.
Push the tab (1) inwards and remove the blanking plate from
each of the image drums.
each of the image drums.
(1)
SETTING UP > 16
TONER CARTRIDGE INSTALLATION
1.
Remove the four colour toner cartridges from their packages.
2.
Shake the toner cartridges back and forth several times then,
holding each toner cartridge horizontally, remove the tape.
Remove the locking piece from behind the coloured toner
release lever.
holding each toner cartridge horizontally, remove the tape.
Remove the locking piece from behind the coloured toner
release lever.
3.
Insert each toner cartridge into the image drum, left side first,
engaging the drum locating peg in the hole in its toner
engaging the drum locating peg in the hole in its toner
WARNING!
Take extreme care when handling toner.
>
>
Toner can be harmful if inhaled, swallowed or if it gets in the eyes.
>
Toner can also stain hands and clothing.
Click on the first or last page to see other AR-C200P (serv.man8) service manuals if exist.