Sharp AR-C200P (serv.man12) User Manual / Operation Manual ▷ View online
UNIX 80
Apple Macintosh 81
APPLE MACINTOSH
Overview
The printer supports the Apple Macintosh AppleTalk environment.
This guide is for administrators and it should be read in conjunction
with the relevant Macintosh manual. The latest Macintosh service
packs should be installed.
This guide is for administrators and it should be read in conjunction
with the relevant Macintosh manual. The latest Macintosh service
packs should be installed.
Supported Versions
All Macintosh operating systems from OS 8.1 are supported.
Printing the Network Interface Card Configuration Sheet
The printer’s configuration page reports information that is required
for Macintosh configuration. To print a configuration page, while the
printer is switched on, depress the NIC’s push-button for three
seconds and then release.
for Macintosh configuration. To print a configuration page, while the
printer is switched on, depress the NIC’s push-button for three
seconds and then release.
The first six characters of the Ethernet address are the same for all
type network cards. The last six characters of the Ethernet address are
unique to each card.
type network cards. The last six characters of the Ethernet address are
unique to each card.
Apple Macintosh 82
Setup Utilities for Mac OS 8.x and 9.x
Use the Network Card Setup Utility (Macintosh) to assign an IP
address and configure the network interface card. For instructions
please refer to the Configuration Utility section and on-line help.
address and configure the network interface card. For instructions
please refer to the Configuration Utility section and on-line help.
Configuration
There are three items that need to be configured for EtherTalk.
1.
Use EtherTalk Protocol
Please check the Use EtherTalk Protocol checkbox.
2.
Printer Name
Give the Printer Name as you would like it to appear in the Chooser
3.
Zone Name
If your network uses Zones, please enter the Zone Name here,
otherwise leave as is.
otherwise leave as is.
AppleTalk Configuration
To enable network printing from the Macintosh, you must configure
AppleTalk to connect via Ethernet.
AppleTalk to connect via Ethernet.
1.
From the Apple menu select [Control Panels – AppleTalk].
2.
From the AppleTalk configuration page select [Connect via:
Ethernet].
Ethernet].
3.
In Setup Current Zone, if used, make sure that your zone
information is correct.
information is correct.
Apple Macintosh 83
4.
Close the AppleTalk configuration page and save changes to
current configuration when prompted.
current configuration when prompted.
5.
Configuration is now complete and you are ready to install your
printer driver. Please enter your driver CD, run the installer and
follow the on-screen instructions.
printer driver. Please enter your driver CD, run the installer and
follow the on-screen instructions.
Macintosh OS X
The NIC is also supported in the Macintosh OS X environment.
Run the installer on the driver CD to install the printer’s PPD file.
In OS X you need to make sure that AppleTalk is turned on in order to
connect to an AppleTalk printer.
connect to an AppleTalk printer.
Click on the first or last page to see other AR-C200P (serv.man12) service manuals if exist.