DOWNLOAD Sharp AR-C200P (serv.man12) Service Manual ↓ Size: 3.04 MB | Pages: 96 in PDF or view online for FREE

Model
AR-C200P (serv.man12)
Pages
96
Size
3.04 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AR-C200P Network Interface User Guide
File
ar-c200p-sm12.pdf
Date

Sharp AR-C200P (serv.man12) User Manual / Operation Manual ▷ View online

UNIX 76
>
euc  must  be  used  for  the  printing  a  text  file  of  the  EUC  Kanji
code.
>
sjis and euc function only as PostScript printers. 
BSD-based UNIX
Print using the lpr command.
# lpr –PAR-C200P_lp test.prn
If the lprm command is used, the print job is cancelled.
Example: To delete a print job (Job ID 123) on the AR-C200P_lp 
# lprm –PAR-C200P_lp 123
Verify the printer status using the lpq command.
>
The result of lpq may not be displayed correctly depending on
UNIX operating system specification.
>
While the short format of lpq  is  a  UNIX  compatible  format,  the
long format is unique to this network interface.
Example of the short format: 
# lpq –PAR-C200P_lp
Example of the long format: 
# lpq –l -PAR-C200P_lp
System V-based UNIX
Print using the lp command.
# lp –d AR-C200P_lp test.prn
Delete a print job using cancel command.
Example: To delete a print job (Job ID 456) in the AR-C200P_lp
# cancel AR-C200P_lp  -456
Verify the printer status using the lpstat command.
# lpstat –pAR-C200P_lp
Logical printer
Printer function
lp
For direct output
sjis
For Shift JIS Kanji converted output
euc
For EUC Kanji converted output
UNIX 77
>
The result of lpstat may not be displayed correctly depending on
UNIX operating system specification (e.g. Solaris 2.x).
FTP printing
FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If
the print data is sent to a logical printer via FTP, it is printed.
Refer to the workstation’s manual for details of the ftp command. The
following explanation uses print file test.prn with printer name AR-
C200P_lp as an example.
Logical directories
The printer’s network interface includes three logical directories.
lp must be used for printing a file created using the printer driver.
sjis must be used for printing a text file of Shift JIS Kanji code.
euc must be used for the printing a text file of the EUC Kanji code
>
jis and euc function only as PostScript printers. 
>
You can not send data to the root directory.
1.
Login to the network interface card.
When printing with ftp, use any values for name and password.
However, if the user name is [root], the password set under TELNET or
the utility is required. See the appropriate section for details.
Example: Logging in with host name AR-C200P (or  IP address
192.168.20.127).
# ftp AR-C200P (or ftp 192.168.20.127
Connected to AR-C200P
220 EthernetBoard xxxxxxxxxx Ver nn.nn FTP Server
Name (AR-C200P:<none>) : root
331 Password required.
Logical directory
Printer function
lp
For direct output
sjis
For Shift JIS Kanji converted output
euc
For EUC Kanji converted output
UNIX 78
Password:<CR>
230 User Logged in
ftp>
The network card logical directory structure is hierarchical. Move to the
logical directory; it is not possible to output print data to the root
directory. 
2.
Move to the preferable logical directory using the cd command. 
Example: moving to the lp directory and confirming the current
directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
257 ”/lp” is current directory
ftp>
3.
Configure the transfer mode
There are two types of transfer mode: BINARY mode, in which the file
content is output as it is and ASCII mode, which converts the LF code
to the CR+LF code. If a binary file converted by the printer driver is
transferred, the transfer mode has to be BINARY mode.
Example: changing transfer mode to binary mode and verifying the
current mode
ftp> type binary
200 Type set to I.
ftp> type
Using binary mode to transfer files.
ftp>
4.
Transfer the print data to the network card using the put
command. Two methods of file transfer using the put command
are available.
Example: transferring print data test.prn
ftp> put test.prn
Example: transferring print data specified by absolute path/users/
test/test.prn
ftp> put /users/test/test.prn /lp
UNIX 79
5.
Logout from the network card using the quit command
ftp> quit
Three states can be verified using the quote command stat: the IP
address, login user name and transfer mode. In addition, printer status
can be verified by specifying the directory after the stat (lp, sjis, euc).
Example: displaying network card status
ftp> quote stat
211-FTP server status:
Connected to: 192.168.20.10.000.00
User logged in: root
Transfer type: BINARY
Data connection: Closed.
211 End of status.
ftp>
Example: displaying the network card status (directory name: lp)
ftp> quote stat /lp
211-FTP directory status:
Ready
211 End of status
ftp>
Page of 96
Display

Click on the first or last page to see other AR-C200P (serv.man12) service manuals if exist.