Sharp AR-C200P (serv.man12) User Manual / Operation Manual ▷ View online
Network Configuration 56
6: Setup printer trap
1: Prn-Trap Community
—
2: Setup TCP#1 trap ~
6: Setup TCP#5 trap
6: Setup TCP#5 trap
1: TCP#1~5 Trap Enable
2: Printer Reboot Trap
3: Receive Illegal Trap
4: Online Trap
5: Offline Trap
6: Paper Out Trap
7: Paper Jam Trap
8: Cover Open Trap
9: Printer Error Trap
10: TCP#1~5 Trap Address
99: Back to prior menu
7: Setup IPX Trap
1: IPX Trap Enable
2: Printer Reboot Trap
3: Receive Illegal Trap
4: Online Trap
5: Offline Trap
6: Paper Out Trap
7: Paper Jam Trap
8: Cover Open Trap
9: Printer Error Trap
10: IPX Trap Address
11: IPX Trap Net
99: Back to prior menu
99: Back to prior menu
7: Setup SMTP (E-Mail)
(See “Appendix– E-Mail
(See “Appendix– E-Mail
Alert Function” on
page 93.)
page 93.)
1: SMTP Transmit
—
2: SMTP Receive
3: SMTP server name
—
4: SMTP port number
—
5: E-Mail address
—
6: Reply-to address
—
7: Destination address 1 ~
11: Destination address 5
11: Destination address 5
1: To Address 1—5
2: Notify Mode
3: Check time (hours)
4: Consumable Warning
5: Consumable Error
6: Maintenance Warning
7: Maintenance Error
8: Paper warning
Level1
Level2
Level3
Network Configuration 57
9: Paper Error
10: Printing Warning
11: Printing Error
12: HDD/Flash Memory
13: Print Result Warning
14: Print Result Error
15: Other Error
16: Interface Warning
17: Interface Error
12: Additional Info
1: Printer Model
2: Network Interface
3: Serial Number
4: Asset Number
5: System Name
6: System Location
7: IP Address
8: Ethernet Address
9: Computer Name
10: Printer URL
99: Back to prior menu
13: Comment line 1 —
16: Comment line 4
16: Comment line 4
—
99: Back to prior menu
—
9: Maintenance
1: Web Service
—
2: Web (IPP) Port No.
—
3: Telnet Service
—
4: FTP Service
—
5: SNMP Service
—
6: LAN Scale
—
7: Default TTL
—
99: Back to prior menu
—
10: Setup printer port
1: BOJ String
—
2: EOJ String
—
3: BOJ String(KANJI)
—
4: EOJ String(KANJI)
—
5: Printer Type
—
6: TAB Size (char.)
—
7: Page Width (char.)
—
8: Page Length(line)
—
9: FTP/LPR Banner
—
99: Back to prior menu
—
Level1
Level2
Level3
Network Configuration 58
5.
When configuration is complete, select [Exit Setup] to save your
change. To exit without saving your modification, select [Quit].
change. To exit without saving your modification, select [Quit].
6.
Turn the printer off and on again.
The network card continues to use pre-transmission settings until the
printer is turned off and back on again.
printer is turned off and back on again.
11: Display status
1: prn1
—
2: Network
—
3: Version
99: Back to prior menu
—
12: IP Filtering Setup
1: IP Filtering
2: IP Address range 1 ~
11: IP Address range 10
11: IP Address range 10
1: Start Address
2: End Address
3: Printing
4: Configuration
99: Back to prior menu
12: Admin IP Address
99: Back to prior menu
97: Network Reset
—
—
98: Set default
(Network)
(Network)
—
—
99: Exit setup
—
—
Level1
Level2
Level3
Network Configuration 59
Using SNMP
The printer and network card can be managed via a standard SNMP
management station. The network card supports SNMPv1, MIB-II etc. I
management station. The network card supports SNMPv1, MIB-II etc. I
Please refer to the readme file in the MIB folder for further
information.
information.
The printer’s trap address can be set in five places using TCP/IP and
in one place with IPX.
in one place with IPX.
Printer trap settings can be made with TELNET and a Web browser.
Click on the first or last page to see other AR-C200P (serv.man12) service manuals if exist.