DOWNLOAD Sharp AR-810 (serv.man8) Service Manual ↓ Size: 97.83 KB | Pages: 14 in PDF or view online for FREE

Model
AR-810 (serv.man8)
Pages
14
Size
97.83 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / General operations
File
ar-810-sm8.pdf
Date
PREV: Sharp AR-810 (serv.man7) Service Manual

Sharp AR-810 (serv.man8) Service Manual ▷ View online

AR-651/810  GENERAL OPERATIONS  4 - 13
4. 4. 2.  Automatic feed copying
YES
NO
NO
YES
YES
YES
NO
NO
NO
"CA1"
B
"E01"
YES
"CA2"
Press [START] key
Developer bias  ON Fuser motor  ON
Main charger  ON
Developer unit motor  ON
Discharge lamp  ON Transfer belt motor  ON
Drum motor  ON
Used toner transport motor  ON
Recycle toner transport motor  ON
Process system
        control
Transport system
         control
Scanning system
         control
          Is
polygonal motor
        ON?
Laser  ON
Transfer belt bias  ON
Transfer belt bias  OFF
Is H-sync OK?
Laser  OFF
Process system
 control finished
Intermediate transport
        clutch  ON
Intermediate transport
        clutch  OFF
Registration motor ON
  Drum separation
finger solenoid  ON
Drum separation
finger solenoid  OFF
Registration motor
OFF
Exposure lamp  ON
Carriege moving
       forward
Carriage stopped
Exposure lamp  OFF
Carriage moving
     backward
Carriage stopped
Scanning system
  control finished
Paper jam
           
 Is
fuser unit exit sensor
             ON?
Call for service
Call for service
 Is
remaining set number
0?
 Is
remaining set number
0?
AR-651/810  GENERAL OPERATIONS  4 - 14
YES
NO
B
"E02"
Paper jam
               Is
fuser unit exit sensor
             ON?
Main charger  OFF
Discharge lamp  OFF
Developer bias  OFF
Drum motor  OFF
Transfer belt motor  OFF
Fuser motor  OFF
Developer unit motor  OFF
Recycle toner transport motor  OFF
Used toner transport motor  OFF
Drum reversed
Standby
AR-651/810  GENERAL OPERATIONS  4 - 14
YES
NO
B
"E02"
Paper jam
               Is
fuser unit exit sensor
             ON?
Main charger  OFF
Discharge lamp  OFF
Developer bias  OFF
Drum motor  OFF
Transfer belt motor  OFF
Fuser motor  OFF
Developer unit motor  OFF
Recycle toner transport motor  OFF
Used toner transport motor  OFF
Drum reversed
Standby
AR-651/810  GENERAL OPERATIONS  4 - 14
YES
NO
B
"E02"
Paper jam
               Is
fuser unit exit sensor
             ON?
Main charger  OFF
Discharge lamp  OFF
Developer bias  OFF
Drum motor  OFF
Transfer belt motor  OFF
Fuser motor  OFF
Developer unit motor  OFF
Recycle toner transport motor  OFF
Used toner transport motor  OFF
Drum reversed
Standby
Page of 14
Display

Sharp AR-810 (serv.man8) Service Manual ▷ Download

Found More:

AR-810 (serv.man8) Service Manuals

Preview DownloadPagesSize
AR-810 (serv.man13) Paper feeding section Service Manual 25 847.82 KB
AR-810 (serv.man23) Unpacking and installation Service Manual 11 1.2 MB
AR-810 (serv.man22) Printed wiring boards Service Manual 7 4.21 MB
AR-810 (serv.man21) Power supply unit Service Manual 8 110.03 KB
AR-810 (serv.man20) RADF (Document feeder) Service Manual 91 3.35 MB
AR-810 (serv.man19) Exit reversing unit Service Manual 8 322.91 KB
AR-810 (serv.man18) Fuser unit Service Manual 21 647.22 KB
AR-810 (serv.man17) Transfer transporter unit Service Manual 10 462.6 KB
AR-810 (serv.man16) Developer unit Service Manual 21 585.54 KB
AR-810 (serv.man15) Drum cleaner unit Service Manual 10 281.09 KB
AR-810 (serv.man14) Process section Service Manual 12 226.72 KB
AR-810 (serv.man12) Laser optical unit Service Manual 9 877.36 KB
AR-810 (serv.man11) Image processing Service Manual 8 55.64 KB
AR-810 (serv.man10) Scanning section Service Manual 14 100.65 KB
AR-810 (serv.man9) Control panel Service Manual 12 199.17 KB
AR-810 (serv.man7) Copy process Service Manual 11 177.81 KB
AR-810 (serv.man6) Component layout functions Service Manual 30 1.25 MB
AR-810 (serv.man5) Front cover, precautions and contents Service Manual 5 80.44 KB
AR-810 (serv.man4) AR651 810-Service Handbook Service Manual 127 17.7 MB
AR-810 (serv.man3) AR651 810-Circuit Diagrams Service Manual 127 9.77 MB
AR-810 (serv.man24) Complete service manual Service Manual 127 14.46 MB
AR-810 (serv.man26) AR651 810 Operation Manuals User Manual / Operation Manual 127 3.81 MB
AR-810 (serv.man25) AR651 810-Parts Guide Service Manual / Parts Guide 127 22.77 MB
AR-810 (serv.man2) Specifications Service Manual / Specification 15 120.76 KB
AR-810 (serv.man53) The improvement for image glossy lines due to grease of cleaning roller. Service Manual / Technical Bulletin 2 82.16 KB
AR-810 (serv.man45) Change of the PWB unit in the laser optical unit. Service Manual / Technical Bulletin 1 104.34 KB
AR-810 (serv.man46) Change of torque limiter. Service Manual / Technical Bulletin 1 91.88 KB
AR-810 (serv.man47) Parts change information regarding the lower frame and inversion open guide part 1. Service Manual / Technical Bulletin 2 155.27 KB
AR-810 (serv.man48) Measure to prevent breakage of one way bearing on cleaning web. Service Manual / Technical Bulletin 3 272.27 KB
AR-810 (serv.man49) Revision of illustration of 4 Lower frame section in the parts guide Service Manual / Technical Bulletin 2 353.24 KB
AR-810 (serv.man50) ROM upgrade ... (5) Service Manual / Technical Bulletin 10 153.94 KB
AR-810 (serv.man51) Change of parts to extend service life of paper feed section roller. Service Manual / Technical Bulletin 6 480.62 KB
AR-810 (serv.man52) The improvement for displaying tandem LCF check paper Service Manual / Technical Bulletin 6 1.64 MB
AR-810 (serv.man33) Correction of SRAM parts code. Service Manual / Technical Bulletin 1 15.71 KB
AR-810 (serv.man54) The improvement for waving vertical lines in the rear side of the copy image Service Manual / Technical Bulletin 2 240.2 KB
AR-810 (serv.man55) Correction for loss of image 1 3 from the trail edge Service Manual / Technical Bulletin 1 12.31 KB
AR-810 (serv.man56) Countermeasure for background CD3 error near toner empty-toner recycle pipe blockage. Service Manual / Technical Bulletin 2 32.94 KB
AR-810 (serv.man57) Change of part code of PWB unit listed in the fusing drive section in the part guide 24 . Service Manual / Technical Bulletin 1 22.35 KB
AR-810 (serv.man58) Correction of parts codes of pulleys on the reversion drive unit listed in the part guide 13 . Service Manual / Technical Bulletin 1 14.8 KB
AR-810 (serv.man59) Improvement carried out to stop EB5 jam, due to over running of the paper stop position. Service Manual / Technical Bulletin 1 8.1 KB
AR-810 (serv.man60) ROM upgrading (4) Service Manual / Technical Bulletin 8 46.83 KB
AR-810 (serv.man61) Required attention when installing the OPC drum to the cleaner unit. Service Manual / Technical Bulletin 2 855.9 KB
AR-810 (serv.man43) Change of the PWB unit in section 88 (RADF hinge) of the parts guide. Service Manual / Technical Bulletin 1 102.84 KB
AR-810 (serv.man27) Improvement against wrong detection of CD1 and CD2 Service Manual / Technical Bulletin 2 282.46 KB
AR-810 (serv.man28) 1 Change in sensors and screws to comply with RoHS, 2 One part code available for seal part, 3 Providing commonality of parts and discontinued use of arrow labels, 4 Change in cassette shafts to comply with RoHS, 5 Change in bushings. Service Manual / Technical Bulletin 4 172.22 KB
AR-810 (serv.man29) 1. Part change of the fusing unit, 2. Change in power cords for the UK to comply with RoHS, 3. Parts guide correction. Service Manual / Technical Bulletin 3 57.58 KB
AR-810 (serv.man30) ROM upgrade 9, Sys ROM 013, UI ROM 012, Main ROM 16, Laser ROM 09, Scanner ROM 08, PFC ROM 08, RADF 03. Please contact TP Matrix for upgrade cards. Service Manual / Technical Bulletin 2 15.69 KB
AR-810 (serv.man31) Correction to parts code and illustration of upper cover rear and upper cover right. Service Manual / Technical Bulletin 1 17.52 KB
AR-810 (serv.man32) Discontinued use of coupling seal. Service Manual / Technical Bulletin 1 16.1 KB
AR-810 (serv.man34) Correction of SRAM parts code. Service Manual / Technical Bulletin 1 12.92 KB
AR-810 (serv.man35) Correction to parts guide. Service Manual / Technical Bulletin 2 59.02 KB
AR-810 (serv.man36) 1 Change in solenoids and automatic toner sensors (adaptation to RoHS). 2 Addition of sensor protection sheet. Service Manual / Technical Bulletin 3 50.87 KB
AR-810 (serv.man37) Change of TRU rail Service Manual / Technical Bulletin 1 23.14 KB
AR-810 (serv.man38) Correction to the parts code and illustration of the upper cover rear and upper cover right. Service Manual / Technical Bulletin 1 17.47 KB
AR-810 (serv.man39) ROM Upgrade...7 - Main ROM 15 Service Manual / Technical Bulletin 1 85.99 KB
AR-810 (serv.man40) Change in the manual feed tray shape and corrections to screw description. Service Manual / Technical Bulletin 2 165.15 KB
AR-810 (serv.man41) Lens cover design change. Service Manual / Technical Bulletin 1 80.18 KB
AR-810 (serv.man42) Modification of the tip shape of the drum pick off pawl. Service Manual / Technical Bulletin 1 67.67 KB
AR-810 (serv.man44) Change in length of screw for the drum drive unit. Service Manual / Technical Bulletin 1 83.74 KB
AR-810 AR651 810 Handy Guide Handy Guide 60 2.33 MB
AR-810 (serv.man62) MSDS F-31171 Regulatory Data 4 404.69 KB
AR-810 (serv.man63) MSDS F-01171 Regulatory Data 4 425.15 KB

RANDOM: