Sharp AR-651 (serv.man23) Service Manual ▷ View online
AR-651/810 SPECIFICATIONS 1 - 4
E. Paper feed
F. Continuous copy
G. Density adjustment
H. Picture quality mode
I.
Magnification ratio
(1) Reduction, enlargement
Paper feed means
Cassette, 2 steps
Tandem LCF
Manual feed
Capacity
Cassette: 500 sheets (Loading height: 55mm or less)
Tandem LCF: 1250 x 2 sheets (Loading height: 137mm or
less)
Manual feed: 100 sheets (Loading height: 11mm or less)
Manual feed start
START key start
Priority paper feed means
Yes
Note 1: Priority can be switched to the other paper feed
means by date input in the adjustment mode.
Tandem LCF
Manual feed size
specification
Can be specified by pressing the paper size key after loading
paper.
Note 1: Size specification allows binding margin, duplex edge
erase, and continuous paper copy.
Paper size change
The paper guide in the cassette is shifted to the fixed size
position, and the paper size is changed by the setup code or
the setup of the special menu.
Number of copies
1 to 9999 sheets (Max. number of copies), in increment of 1
Input system
Input by 10 key
Counting system
Reduction system
Note 1: "1" is displayed in auto clear or during warm-up.
Note 2: Count-down display on the print status display for every print job
Note 3: For a cop job, the status is also displayed on the copy display.
Automatic density
adjustment
Yes
Manual density
adjustment
11-step adjustment (Operated by keys on the control panel
LCD)
Priority mode
Automatic density adjustment
Note 1: Selection of automatic/manual is available by data
input in the adjustment mode.
Factory setup: Auto
Image process mode
Standard mode/Photo mode/Text mode
Priority mode
Standard mode
Note 1: Selectable by data input in the adjustment mode.
Reduction, enlargement
Automatic setup by selection of the document size and the paper size
Note 1: Any fixed size (including different series) can be set to Japan A5, OTHER.
AR-651/810 SPECIFICATIONS 1 - 5
(2) Selected magnification ratio
a. AB series
a. AB series
b. LT Series
Note: Figures indicate the selected magnification ratios (%).
(3) Others
J. Counter display
Paper
Document
A3
B4
FOLIO
A4
B5
A5
A3
100
86
71
71
61
50
B4
115
100
82
82
71
57
FOLIO
127
110
100
90
78
63
A4
141
122
100
100
86
71
B5
163
141
115
115
100
82
A5
200
173
141
141
122
100
Paper
Document
LD
COMP
LG
LT
ST
LD
100
82
78
65
50
COMP
108
100
84
78
54
LG
121
100
100
78
60
LT
129
119
100
100
65
ST
200
165
154
129
100
Zoom
25 to 400%, in increment of 1%
25 to 200%, in increment of 1% (when the RADF is used)
Copy range display
No
Note 1: The center position is displayed in continuous
paper copy and book copy.
Automatic paper select(APS)/
Automatic magnification ratio
select (AMS)
Yes
Priority on APS
when shipping
Total counter
Mechanical, 7 digits
Displayed on the control panel.
A3/LD double count mode
Yes (Electronic counter)
Factory setup: ON
PM counter
Yes (Electronic counter)
Factory setup: 460K, 500K
Resettable counter
No
Document counter
Yes (Electronic counter)
Factory setup
Europe: Yes
Others: No
JOB counter
Copy counter
Print counter
Copy scan counter
File/network scan counter
AR-651/810 SPECIFICATIONS 1 - 6
K. Charger wire cleaning
Note: The charger wire is cleaned.
L. Special functions
Charger wire cleaning
Automatic cleaning system
Interruption
Yes
Pre-heating
Yes
Key input can be
accepted during warm-up
or ready state.
Note 1: Automatic pre-heat function can be set in the
adjustment mode.
Note 2: Time can be set in the adjustment mode.
(Setup: 15, 20, 30, 45, 60 min)
Factory setup (Note 2):
15 min
Note 3: The fusing unit temperature in pre-heating can be
changed in the adjustment mode.
Sleep
Yes (when the controller is connected)
Excluding the options and
the dump heater.
Note: The power consumption in the sleep mode is max.
20W.
Auto off
Yes (When the controller is not connected)
Note 1: Time up to off can be set in the adjustment mode or
on the adjustment menu. (Max. 240 min.)
Factory setup (Note 1):
90 min
Note 2: Use/Non-use can be selected by setup on the
adjustment mode.
Factory setup (Note 2):
Yes
Note 3: Selection of user setup allow/inhibit on time setup
can be set.
Factory setup (Note 3)
Japan, North America,
Australia: Allow
Europe: Inhibit
Auto clear
Yes
Note: Setup can be changed in the adjustment mode or on
the adjustment menu. (15 to 150sec (in increment of
15 sec))
Factory setup: 45sec
Self diag
Yes
Error code history
Yes
Department
management (pass
code function)
Yes (The number of copies and the number of prints are
managed for each department.)
Factory setup: OFF
Note 1: Entry of the pass code in 5 digits is required when
supplying the power or in auto clear for copying.
Entry of OOOO is
rejected. (Note 1)
Note 2: Common use with the key counter is inhibited.
Note 3: Max. 150 kinds can be set.
Dew prevention
Yes (Option depending on the destination)
Message Yes
Note 1: Graphic LCD, back-light provided
All clear
Yes
Mode memory
Yes (4 modes)
Inhibited in interruption
copy
Cover mode
Yes (following 4 modes)
(1) White cover mode
(2) Copy cover mode
(3) White cover/white back cover mode
(4) Copy cover/white back cover mode
AR-651/810 SPECIFICATIONS 1 - 7
Sheet insertion mode
Yes (following 2 modes)
(1) White sheet insertion mode
(2) Copy paper insertion mode
Weekly timer
Yes
Pre-heat start
Yes
Pre-heat copy
Yes
Max. 6 jobs.
Note 1: The next copy job mode setup can be made when
document scan is completed. When the START key
is pressed, preceding entry of document is started.
Note 2: In the 6th job, the machine is in the scan reservation
state. After completion of copy 1 job, scan is
automatically started.
Automatic duplex
automatic selection
Yes
Factory setup: OFF
Time display
Yes
Copy riser support
No
Automatic sort
Yes
Factory setup: ON
Automatic cassette
selection
Yes
Network printer
Network printer board can be connected. (Option)
DSS
No
Language selection
Yes (Japanese, English, German, French, Spanish, Italian:
Factory setup)
Note: Language data depends on the HDD.
FROM update
Yes (following 2 methods)
(1) Downloading from PC
(2) Downloading from a jig PC board.
Serviceman support
Adjustment code
output
Yes (05, 08 code)
Serviceman support
Mixed-size document
mode
Yes (when the RADF is installed)
Heavy paper mode
Yes
Note 1: One of the following two modes must be selected
according to the kind of Heavy paper.
• Heavy paper mode 1: For paper of 80 g/m² to 163
g/m²
• Heavy paper mode 2: For paper of 163 g/m² - 209
g/m²
Note 2: The copy speed standard for using Heavy paper is
as shown below:
• Cassette, LCF (Tandem) paper feed, A4/LT size
Note 3: The duplex function is available.
Paper used for evaluation
North America: Wausau
Exact/Index
Europe: Noisydra Color
Copy
AR-651
AR-810
Normal paper
65
81
Heavy paper mode 1
65
81
Heavy paper mode 2
65
65
Click on the first or last page to see other AR-651 (serv.man23) service manuals if exist.