Sharp AR-407 (serv.man8) User Manual / Operation Manual ▷ View online
5-5
CHAPTER
5
COPIER TROUBLE?
Misfeed removal
MISFEED REMOVAL
Misfeed in paper trays 1 and 2
1
Open the right side cover.
●
Hold the handle and gently open the cover.
●
If any paper is set in the bypass tray, remove the paper and close
the bypass tray before opening the right side cover.
the bypass tray before opening the right side cover.
2
Remove the misfed paper.
●
Be careful not to tear the misfed paper during removal.
3
If the paper cannot be seen from the side, pull out the
paper tray which was in use and remove the misfed
paper.
paper tray which was in use and remove the misfed
paper.
●
Be careful not to tear the misfed paper during removal.
NOTE:
When the paper was misfed in tray 2 and the paper has dropped
beyond the tray, remove the tray and remove the misfed paper. To
remove the paper tray, pull the paper tray out until it stops and then
lift and remove the paper tray.
When the paper was misfed in tray 2 and the paper has dropped
beyond the tray, remove the tray and remove the misfed paper. To
remove the paper tray, pull the paper tray out until it stops and then
lift and remove the paper tray.
4
Close the paper tray and the side cover.
5
Open and close the front cover to cancel the misfeed
display.
display.
●
Confirm that the misfeed display is cleared.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
5-6
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
Misfeed in the transport area
1
Open the front cover.
2
Remove the misfed paper.
1
Turn the transport lever to the left.
CAUTION
The area behind the transport lever is hot.
Use sufficient care in handling this lever.
Use sufficient care in handling this lever.
2
Turn roller rotating knob
A
in the direction of the arrow to
remove the misfed paper.
●
Push down the paper guide and remove any misfed paper.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Paper guide
Transport lever
Roller rotating knob
A
5-7
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
3
Turn the transport lever back into place.
3
Close the front cover.
●
Confirm that the misfeed display is cleared.
Misfeed around the fusing unit and exit area
NOTE:
If an optional finisher (AR-FN1N) is fitted, please refer to chapter 7
Optional Equipment for additional misfeed removal help.
Optional Equipment for additional misfeed removal help.
1
Open the front cover.
2
Open the exit area cover carefully.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Transport lever
5-8
CHAPTER
5
MISFEED REMOVAL
3
Remove the misfed paper.
If the misfed paper is in the inner part of the exit area:
1
Turn roller rotating knob
B
in the direction of the arrow and
remove the paper.
2
If the misfed paper is deep in the fusing unit, lift the fusing unit
tab and remove any misfed paper.
tab and remove any misfed paper.
CAUTION
The fusing unit is hot! Be sure to touch only the green tab or the
green roller rotating knob.
green roller rotating knob.
If the misfed paper is in the exit area:
1
Turn roller rotating knob
C
in the direction of the arrow and
remove the paper.
2
If the misfed paper cannot be removed in step
1
, raise exit
area lever
C
and remove the paper.
4
Close the exit area cover.
COPIER TROUBLE?
Misfeed removal
Fusing unit tab
Roller rotating knob B
Exit area lever C
Roller rotating knob C
Click on the first or last page to see other AR-407 (serv.man8) service manuals if exist.