Sharp AR-407 (serv.man8) User Manual / Operation Manual ▷ View online
6-7
CHAPTER
6
TOUCH PANEL CONTRAST ADJUSTMENT
The contrast of the touch panel can be adjusted as below.
1
Press the CUSTOM SETTINGS (
) key.
2
Press the “DISPLAY CONTRAST” key on the touch
panel.
panel.
3
Press the “LIGHTER” or “DARKER” key to adjust the
contrast.
contrast.
4
Press the “OK” key.
ETTINGS
DISPLAY
CONTRAST
KEY OPERATOR
PROGRAMS
GENERAL INFORMATION
Touch panel contrast adjustment
TTINGS
ONTRAST
LIGHTER
DARKER
TER
OK
DARKER
6-8
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION
Specifications
COPIER
AR-287
AR-337
AR-407
Type
Desktop
Copy system
Dry, electrostatic transfer system
Originals
Sheets, bound documents
Original feed system
Reversing automatic document
feeder (RADF)
feeder (RADF)
Original sizes
Max. A3 (11" x 17")
Copy sizes
Max. A3 (11" x 17"), min. A6 (5-1/2" x 8-1/2")
Image loss:
Image loss:
Max. 5 mm (13/64") (both leading and trailing edges)
Max. 5 mm (13/64") (along all other edges in total)
Max. 5 mm (13/64") (along all other edges in total)
For paper weight, see page 4-2.
Copying speed
28 copies/min.
33 copies/min.
40 copies/min.
(at 100% copy ratio)
(A4 (8-1/2" x 11"))
(A4 (8-1/2" x 11"))
(A4 (8-1/2" x 11"))
20 copies/min.
24 copies/min.
27 copies/min.
(A4R (8-1/2" x 11"R))
(A4R (8-1/2" x 11"R))
(A4R (8-1/2" x 11"R))
17 copies/min.
21 copies/min.
24 copies/min.
(B4 (8-1/2" x 14"))
(B4 (8-1/2" x 14"))
(B4 (8-1/2" x 14"))
14 copies/min.
17 copies/min.
19 copies/min.
(A3 (11" x 17"))
(A3 (11" x 17"))
(A3 (11" x 17"))
Continuous copy
Max. 999 copies; subtractive counter
First-copy time*
Approx. 5.2 sec.
4.5 sec.
Warm-up time
Approx. 65 sec.
75 sec.
Copy ratio
Variable: 25 to 800% in 1% increments, total
25 to 400% in 1%
776 steps
increments, total
376 steps
376 steps
(can be set in the horizontal and vertical directions independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%, 400%, 800% (25%, 50%, 64%, 77%, 95%, 100%,
121%, 129%, 141%, 200%, 400%, 800%)(800% for the AR-287 and
AR-337 only)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%, 400%, 800% (25%, 50%, 64%, 77%, 95%, 100%,
121%, 129%, 141%, 200%, 400%, 800%)(800% for the AR-287 and
AR-337 only)
Exposure system
Document glass:
Moving optical source
(stationary platen) with automatic
exposure function
(stationary platen) with automatic
exposure function
Copy paper feed
Two paper trays with automatic paper feed (500 sheets each);
one bypass tray with 50-sheet automatic feed capability
one bypass tray with 50-sheet automatic feed capability
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Xenon lamp
Resolution
Scan:
400 dpi
Output: 600 dpi
Gradation
Scan:
256 levels
Output: 2 levels (normal copying)
Required power supply
Local voltage ±10% (For this copier’s power supply requirements,
see the name plate located on the left hand side at the rear corner of
the copier.)
see the name plate located on the left hand side at the rear corner of
the copier.)
* When the copier is in the noise level reduce mode, the first copy time will be several seconds longer.
6-9
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION
Specifications
DUPLEX MODULE
Paper type
Ordinary paper only
Number of copies
1 (trayless system)
Copy paper size
A5, A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Copy paper weight
56 to 105
g
/m
2
(15 lbs. to 28 lbs.)
Specifications are subject to change for improvement without notice.
DOCUMENT FEEDER
Type
Reversing automatic document feeder
(RADF)
(RADF)
Acceptable originals
Single-sided originals:
50 to 128
g
/m
2
(14 to 34 lbs.)
Weight:
Two-sided originals:
50 to 128
g
/m
2
(14 to 34 lbs.)
for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals.
50 to 110
50 to 110
g
/m
2
(14 to 29 lbs.) for B4 and A3 (8-1/2" x 14" and 11" x 17")
originals.
Size:
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity:
Up to 50 sheets for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals
provided the total aggregate thickness does not exceed 6.5 mm or 1/4"
(50 to 80
(50 to 80
g
/m
2
(14 to 20 lbs.)) or 5 mm or 3/16" (80 to 128
g
/m
2
(21 to 34
lbs.))
Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals
Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals
AR-287
AR-337
AR-407
Power consumption
Max. 1.85kW
Overall dimensions
1292 mm (W) x 695 mm (D)
1292 mm (W) x 700 mm (D)
(50-7/8" (W) x 27-3/8" (D))
(50-7/8" (W) x 27-9/16" (D))
Weight
Approx. 98 k
g
(217 lbs.)
Copier dimensions
600 mm (W) x 695 mm (D) x 750 mm (H)
600 mm (W) x 700 mm (D)
(23-5/8" (W) x 27-3/8" (D) x 29-17/32" (H))
x 750 mm (H)
(23-5/8" (W) x 27-9/16" (D)
x 29-17/32" (H))
(23-5/8" (W) x 27-9/16" (D)
x 29-17/32" (H))
Operating conditions
Temperature: 15°C to 30°C (59°F to 86°F)
Humidity:
Humidity:
20% to 85%
Optional equipment
Finisher (AR-FN1N, AR-FN2)
Large capacity tray (AR-LC1N)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Dual tray output unit (AR-TR1)
Exit tray (AR-TE1)
Tandem - connection cable (AR-CA1)
Printer expansion kit (AR-PB2A)
Printer server card (AR-NC3D)
Network scanner expansion kit (AR-NS1)
Large capacity tray (AR-LC1N)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Dual tray output unit (AR-TR1)
Exit tray (AR-TE1)
Tandem - connection cable (AR-CA1)
Printer expansion kit (AR-PB2A)
Printer server card (AR-NC3D)
Network scanner expansion kit (AR-NS1)
Click on the first or last page to see other AR-407 (serv.man8) service manuals if exist.