Sharp AR-337 (serv.man8) User Manual / Operation Manual ▷ View online
5-13
CHAPTER
5
TROUBLESHOOTING
COPIER TROUBLE?
Troubleshooting
Problem
Solution
Dust, dirt, smudges appear
on copies.
on copies.
Touch panel is too dark or
too light.
too light.
“
C H E C K T H E S U B
M A C H I N E .
” message
appears and the tandem
copying does not start.
copying does not start.
“
THE SYSTEM IS NOT
CONFIGURED TO PERFORM
TANDEM JOB. CODE: XX
”
message appears and the
tandem copying can not be
performed.
tandem copying can not be
performed.
●
Document glass, RADF transport
belt dirty?
belt dirty?
●
Is LCD contrast properly
adjusted?
adjusted?
●
Some message appears on the
touch panel of the sub copier?
touch panel of the sub copier?
●
The same options are equipped
for the main and sub copiers?
for the main and sub copiers?
●
The settings in the following key
operator programs are different
on the main and sub copiers:
operator programs are different
on the main and sub copiers:
* Disabling of Duplex Copying
(error code No. 51)
* Disabling of Stapler (error
code No. 52)
* Disabling of Bypass-Tray
When Offset Tray Selected
(error code No. 53: only with
AR-FN2)
(error code No. 53: only with
AR-FN2)
Clean regularly. See page 6-6.
Adjust the LCD contrast.
See page 6-7.
See page 6-7.
Follow the message on the sub copier
to solve the problem.
to solve the problem.
Tandem copying is not performed unless
the same options are equipped for both
main and sub copiers.
the same options are equipped for both
main and sub copiers.
Tandem copying is not performed unless
the settings in these key operator
programs are the same on both main
and sub copiers.
the settings in these key operator
programs are the same on both main
and sub copiers.
If a problem persists after checking the above, please consult your key
operator prior to contacting your authorised Sharp Service Centre.
operator prior to contacting your authorised Sharp Service Centre.
Self-diagnostic function
An automatic self-diagnostic function is built into this copier. Should the
copier malfunction, the self-diagnostic function will locate the problem
and stop the copier to prevent damage. An alphanumeric code will
appear in the message display.
copier malfunction, the self-diagnostic function will locate the problem
and stop the copier to prevent damage. An alphanumeric code will
appear in the message display.
Example
Should the copier stop completely, and the message “
Should the copier stop completely, and the message “
CALL FOR
SERVICE. CODE:
” appear in the message display, contact your
authorised Sharp Service Centre.
★ KEY OPERATOR
See page 8-29.
6-1
CHAPTER
6
CHAPTER 6
GENERAL INFORMATION
This chapter describes general information for using this copier.
Page
●
●
●
●
●
PART NAMES AND FUNCTIONS
......................
6-2
Exterior
.........................................
6-2
Interior
..........................................
6-3
Operation panel
...................................
6-4
Touch panel (Basic screen)
...........................
6-5
●
●
●
●
●
USER MAINTENANCE
..............................
6-6
●
●
●
●
●
TOUCH PANEL CONTRAST ADJUSTMENT
..............
6-7
●
●
●
●
●
SPECIFICATIONS
.................................
6-8
6-2
CHAPTER
6
PART NAMES AND FUNCTIONS
Exterior
Exit area cover
Open to remove misfed paper.
Open to remove misfed paper.
Power switch
Press to turn copier power on and off.
Press to turn copier power on and off.
Exit tray (optional)
Finished copies are deposited in the exit tray.
Finished copies are deposited in the exit tray.
Operation panel
All copier controls are located here for easy
operation.
All copier controls are located here for easy
operation.
Document feeder indicators
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Indicates an original is still on the document glass.
RADF feeding roller cover
Open to remove misfed originals.
Open to remove misfed originals.
Original guides
Adjust to the size of the originals.
Adjust to the size of the originals.
Document feeder tray
Holds up to 50 originals.
Holds up to 50 originals.
RADF exit area
Finished originals are output here.
Finished originals are output here.
RADF exit roller cover
Open to remove misfed originals.
Open to remove misfed originals.
Paper trays
Each tray holds 500 sheets of paper.
Each tray holds 500 sheets of paper.
Front cover
Open to remove misfeeds and to service the
copier.
Open to remove misfeeds and to service the
copier.
Handles
Right side cover
Open to remove misfeeds in the paper feed area.
Open to remove misfeeds in the paper feed area.
Toner collecting container cover
Open to replace the toner collecting container.
Open to replace the toner collecting container.
Document glass
All originals which cannot be copied from the
RADF must be copied here.
All originals which cannot be copied from the
RADF must be copied here.
Paper clip tray
Keep paper clips here.
Keep paper clips here.
GENERAL INFORMATION
Part names and functions
Click on the first or last page to see other AR-337 (serv.man8) service manuals if exist.