Sharp AR-203 (serv.man5) Service Manual ▷ View online
AR-203E/5420/M200/M201 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 1
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
2. Internal
1
Original cover
2
Document glass
3
Operation panel
4
Front cover
5
Paper tray
6
Multi-bypass tray
7
Side cover
8
Side cover open button
9
Bypass tray paper guides
10
Paper output tray
11
Paper output tray extension
12
Power switch
13
Handle
14
Power cord
1
Front cover
2
Side cover
3
Fusing unit release lever
4
Transfer charger
5
Charger cleaner
Interface
USB connector
(AR-203E)
(AR-203E)
Interface
USB connector
(AR-M200/M201)
(AR-M200/M201)
3
4
5
1
2
7
9
8
6
10
11
11
12
14
13
3
4
5
2
1
Toner cartridge
Drum cartridge
AR-203E/5420/M200/M201 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 2
3. Operation panel
A. AR-203E/5420
*1: Toner cartridge replacement
When toner density is lower than a specified level, the toner
cartridge replacement indicator lights up to warn the user. If the
toner cartridge is not replaced in that time, the ready lamp
changes to blinking and then start to supply the toner after
around 10 copies. (Cartridge replacement lamp continues to
light.) If toner density is not back to specific level after two min-
utes, the ready indicator goes out and toner developer indicator
starts blinking, and the copier stops. Also when the toner quan-
tity is insufficient, the lamp is lighted.
cartridge replacement indicator lights up to warn the user. If the
toner cartridge is not replaced in that time, the ready lamp
changes to blinking and then start to supply the toner after
around 10 copies. (Cartridge replacement lamp continues to
light.) If toner density is not back to specific level after two min-
utes, the ready indicator goes out and toner developer indicator
starts blinking, and the copier stops. Also when the toner quan-
tity is insufficient, the lamp is lighted.
*2: Indicators on the operation panel
The ONLINE indicator and the start (
) indicator indicate the
state of the printer or scanner.
Start indicator
ONLINE indicator
The ONLINE key is pressed and on line and off line are
changed.
changed.
1
Exposure mode selector key and indicators
Use to sequentially select the exposure modes: AUTO,
MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
Use to sequentially select the exposure modes: AUTO,
MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
2
Light and dark keys and indicators
Use to adjust the MANUAL or PHOTO exposure level. Selected
exposure level is shown by a lit indicator. Use to start and
terminate user program setting.
Use to adjust the MANUAL or PHOTO exposure level. Selected
exposure level is shown by a lit indicator. Use to start and
terminate user program setting.
3
Alarm indicators
Developer replacement required indicator
Misfeed indicator
Toner cartridge replacement required indicator *1
Maintenance indicator
Misfeed indicator
Toner cartridge replacement required indicator *1
Maintenance indicator
4
SPF indicator (AR-203E only)
5
SPF misfeed indicator (AR-203E only)
6
Copy ratio selector key and indicators
Use to sequentially select preset reduction/enlargement copy
ratios.
Selected copy ratio is shown by a lit indicator.
Use to sequentially select preset reduction/enlargement copy
ratios.
Selected copy ratio is shown by a lit indicator.
7
Copy ratio display (%) key
• Use to verify a zoom setting without changing the zoom ratio.
• Use to verify a zoom setting without changing the zoom ratio.
• Use to check the number of originals that must be returned to
the document feeder tray if an original misfeed occurs while
using the SPF.
using the SPF.
8
Display
Displays the specified copy quantity, zoom copy ratio, user
program code, and error code.
Displays the specified copy quantity, zoom copy ratio, user
program code, and error code.
9
SCAN key and indicator (AR-203E only) *2, *3
10
ONLINE key and indicator (AR-203E only)
Lights up when the unit is used as a printer and scanner. *2
Lights up when the unit is used as a printer and scanner. *2
11
Start key and indicator
• Copying is possible when the indicator is on.
• Copying is possible when the indicator is on.
• Press to start copying
• Use to set a user program.
12
Power save indicator
Lights up when the unit is in a power save mode.
Lights up when the unit is in a power save mode.
13
Tray select key
Use to select a paper feed station (paper tray or multi-bypass
tray).
Use to select a paper feed station (paper tray or multi-bypass
tray).
14
Paper feed location indicators
Light up to show the selected paper feed station.
Light up to show the selected paper feed station.
15
ZOOM keys and indicator
Use to select any reduction or enlargement copy ratio from 25%
to 400% in 1% increments. (When the SPF is being used, the
zoom copy ratio range is 50% to 200%.)
Use to select any reduction or enlargement copy ratio from 25%
to 400% in 1% increments. (When the SPF is being used, the
zoom copy ratio range is 50% to 200%.)
16
Copy quantity keys
• Use to select the desired copy quantity (1 to 99).
• Use to make user program entries.
• Use to select the desired copy quantity (1 to 99).
• Use to make user program entries.
17
Clear key
• Press to clear the display, or press during a copy run to
• Press to clear the display, or press during a copy run to
terminate copying.
• Press and hold down during standby to display the total
number of copies made to date.
1
2
7
8
9
10
11
12
13
15
16
17
5
4
3
14
6
Power save indicator
Start indicator
ONLINE indicator
SCAN indicator
On:
Indicates the unit is ready for copying or scanning is
being performed.
being performed.
Blinking: The indicator blinks in the following situations:
• When a print job is interrupted.
• When reserving a copy job.
• When toner is being replenished during a copy or
print job.
Off:
The indicator is off in the following situations:
• During copying or scanning.
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
• When a misfeed or error has occurred.
On:
Indicates the unit is ready for printing or scanning is
being performed. (On line)
being performed. (On line)
Blinking: Printing or data is being received from a computer.
Off:
Copying is being performed. (Off line)
AR-203E/5420/M200/M201 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
Power save indicator
SCAN indicator
*3: Using the SCAN key to begin scanning
Note:
• Scanning is not possible during a copy job.
• If the SCAN (
) key is pressed during a print job, the scan
job will be stored.
• When scanning an original that has been placed in the SPF,
only one original can be placed unless you are using Sharp-
desk.
desk.
1) Press the SCAN (
) key.
The unit enters scan mode.
2) Place the original you wish to scan on the document glass/
SPF.
3) Press the right copy quantity key to display the number of
the application that you wish to use for scanning.
The application numbers are initially as follows.
4) Press the start (
) key.
Scanning will start and the scanned data will be transferred
to the application.
to the application.
B. AR-M200/M201
For Europe
For SCA/SCNZ/Asia
On:
Indicates the unit is in a power save mode.
Blinking: Indicates that the unit is initializing (when the side
cover is opened and closed or the power turned off
and on).
and on).
On:
The SCAN (
) key has been pressed and the unit
is in scanner mode.
Blinking: A scan job is being executed from the computer, or
scan data is stored in the unit’s memory.
Off:
The unit is in the copy mode.
Application
number
Application launched
SC2
E-mail (your standard e-mail program in
the Windows OS you are using)
the Windows OS you are using)
SC3
Fax (if a fax program is installed)
SC4
OCR (if an OCR program is installed)
SC5
Microsoft Word (if installed)
SC6
Filing (if a Filing program is installed)
6 7
8
10 11
12
14
15
9
16
17
1
1
2
2
2
2
1
1
13
READY TO COPY.
100% A4 0
100% A4 0
Display
18
19
20
21
1
2
3
4
5
1
2
6 7
8
10 11
13
12
14
15
9
16
3
4
5
17
READY TO COPY.
100% A4 0
100% A4 0
Display
18
19
20
21
AR-203E/5420/M200/M201 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 4
1
[MODE SELECT] key / Mode indicators
Press this key to select the mode. The indicator of the selected
mode lights (copy, printer, scanner, fax indicators).
Press this key to select the mode. The indicator of the selected
mode lights (copy, printer, scanner, fax indicators).
2
Display
This shows messages indicating the machine status and any
problems that occur, as well as user programs and function
setting menus.
This shows messages indicating the machine status and any
problems that occur, as well as user programs and function
setting menus.
3
Numeric keys
Use these to enter the number of copies and other numerical
settings.
Use these to enter the number of copies and other numerical
settings.
The keys can also be used to select items in function setting
menus.
menus.
4
[CLEAR] key (
)
Use this to clear the set number of copies, as well as cancel a
job that is in progress. When a setting menu appears, use this
key to move back to the previous menu level.
job that is in progress. When a setting menu appears, use this
key to move back to the previous menu level.
5
Power save indicator
This lights up when the power save function is activated.
This lights up when the power save function is activated.
6
RSPF indicator
This lights up when an original is placed in the RSPF.
This lights up when an original is placed in the RSPF.
7
Error indicator
This lights steadily or blinks when a paper misfeed or other error
occurs.
This lights steadily or blinks when a paper misfeed or other error
occurs.
8
[TRAY SELECT] key (
)
Use to select the paper tray that has the desired paper for
copying.
copying.
9
Tray location indicator
Indicates the selected paper tray. The indicator blinks when the
tray is out of paper during operation or is not closed properly.
Indicates the selected paper tray. The indicator blinks when the
tray is out of paper during operation or is not closed properly.
10
[MENU] key
Press this key to select the paper size for copying, to configure a
user program or to display the total count.
Press this key to select the paper size for copying, to configure a
user program or to display the total count.
11
[2-SIDED SCAN] key (
)
[2-SIDED COPY] key (
)
Press to select the automatic two-sided copying mode.
12
[E-SORT/SP.FUNC] key (
)
Press to select the sort function, 2 IN 1 copy function, or margin
shift function.
shift function.
13
[
] key (
), [
] key (
), [OK]/[ENTER] key
Press the [
] key (
) or [
] key (
) to select an item in
a function setting menu.
Press the [OK]/[ENTER] key to enter a selection.
14
[EXPOSURE] key (
)
Use to switch from auto exposure adjustment to text mode or
photo mode.
photo mode.
15
[ZOOM]/[COPY RATIO] key
Press to select an enlargement or reduction ratio.
Press to select an enlargement or reduction ratio.
To select a preset ratio setting, press the [ZOOM]/[COPY
RATIO] key and select the desired preset ratio. To select a ratio
that is not preset, press the [ZOOM]/[COPY RATIO] key, select
the preset ratio that is closest to the desired ratio, and then press
the [
RATIO] key and select the desired preset ratio. To select a ratio
that is not preset, press the [ZOOM]/[COPY RATIO] key, select
the preset ratio that is closest to the desired ratio, and then press
the [
] key (
) or [
] key (
) to increase or decrease
the ratio in increments of 1%.
16
[CLEAR ALL] key (
)
This returns all functions to the default settings. When pressed in
a setting menu, this returns the settings and display to the initial
state.
a setting menu, this returns the settings and display to the initial
state.
17
[START] key (
) / Ready indicator
The ready indicator lights up when copying or scanning is
possible.
possible.
To begin copying, press the [START] key (
).
The [START] key (
) is also pressed to return to normal
operation from auto power shut-off mode.
18
Shows the current copy ratio.
19
Shows the selected paper size.
20
Shows the number of copies that has been entered with the
numeric keys.
numeric keys.
21
A checkmark "
" appears when the exposure has been
changed, or when two-sided copying, sort, 2 IN 1, or margin shift
is selected.
is selected.
2
1
1
1
1
2
2
2
2
1
1
Click on the first or last page to see other AR-203 (serv.man5) service manuals if exist.