Sharp AR-122E Handy Guide ▷ View online
Consumables
Version 1.0
Issue 08/02
9
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
DOCUMENT SOLUTIONS GROUP
Consumables
Model
Life*
Toner Cartridge
AR152LT (10)
Approx. 8,000 sheets**
Developer
AR152LD (10)
Approx. 25,000 sheets
Drum
AR152DM
Approx.25,000 sheets
*
Based on A4 sheet @ 6% coverage
** The initial cartridge supplied with the machine has a life of approx. 2,000 sheets.
Maintenance Display
Life
8K
Remaining quantity
NEAR EMPTY
About 10%
About 10%
EMPTY
LED
ON
Flash
Toner
Machine
Operation allowed
Stop
Life
25K
LED
ON at 25K of developer
count
count
Developer
Machine
Selection is from Not Stop to Stop by SIM 26-37
(If Stop is selected, the LED will flash and stop at
25K)
Default : Not Stop
Clear : SIM 20-1
(If Stop is selected, the LED will flash and stop at
25K)
Default : Not Stop
Clear : SIM 20-1
LED
Selection is from 18K,13K,9K,6K,3K and Free (no
lighting) with SIM 21-1.
Default : Free
Clear : SIM 20-1
lighting) with SIM 21-1.
Default : Free
Clear : SIM 20-1
Maintenance
Machine
Not Stop
Maintenance table
Section
Parts
25K
50K
75K
100K
125K
Developer
DV blade
{
{
{
Developing
DV side seal (F/R)
{
{
{
Process
Peripheral
Peripheral
Drum
{
: Clean
: Replace
Test Simulation Codes
Version 1.0
Issue 08/02
10
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
DOCUMENT SOLUTIONS GROUP
Simulation Codes
The following pages contain information regarding Test simulations.
The specification of the particular model involved and the peripherals which are
installed will determine which simulation/error codes will be operative.
installed will determine which simulation/error codes will be operative.
Copier Simulation Entry Codes
On the copier operation panel press the following keys:
CLEAR EXPOSURE MODE SELECT CLEAR EXPOSURE MODE SELECT
Then select the Test Command required using the copy quantity keys.
Test Simulation Codes
Version 1.0
Issue 08/02
11
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
DOCUMENT SOLUTIONS GROUP
TEST
COMMAND
SUB
CODE
DEFAULT
SETTING
DESCRIPTION
Optical System
01
Mirror scan operation
06
Mirror scanning ageing
01
SPF Individual load operation
02
SPF/RSPF sensor check
03
SPF/RSPF motor rotation check
04
SPF/RSPF original feed solenoid ON
05
RSPF pressure release solenoid ON
06
RSPF resist clutch ON
07
RSPF gate solenoid ON
02
Lamp ON Check
01
Checks op panel display
02
Fuser lamp ON,cooling fan operation
03
Copy lamp ON
05
Machine Individual Load Operation
01
Paper feed solenoid ON
02
Resist solenoid ON
06
Aging
01
Warm up display and aging with jam
06
Intermittent aging
7
High voltage checks
01
Developer bias
02
Main charger (high)
03
Main charger (low)
8
06
Transfer charger
Test Simulations
Version 1.0
Issue 08/02
12
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
DOCUMENT SOLUTIONS GROUP
TEST
COMMAND
SUB
CODE
DEFAULT
SETTING
DESCRIPTION
10
None
Toner motor ageing
14
None
Trouble cancel (excluding U2 trouble).
16
None
U2 trouble cancel
Counter Display
Counter Display
01
Maintenance counter display
02
Maintenance counter preset value display
04
JAM total counter display
05
Total counter display
06
Developer counter display
08
SPF counter display
12
No function
14
P-ROM version display
17
Copy counter display
18
Printer counter display
19
Scanner Mode counter display
21
Scanner counter display
22
SPF jam total counter display
22
Special counter Clear
01
JAM counter clear
04
SPF counter clear
07
No function
08
Copy counter clear
09
Printer counter clear
13
Scanner counter clear
14
SPF JAM total counter clear
15
Scanner mode counter clear
24
Checks the main motor unit
01
Main motor operation check (cooling fan
motor rotation check)
motor rotation check)
10
Polygon motor operation check
25
Various Settings
01
Manual feed set up
02
(R) SPF set up
03
Second cassette set up
26
04
Machine duplex set up
Click on the first or last page to see other AR-122E service manuals if exist.