Sharp AL-1555 (serv.man21) User Manual / Operation Manual ▷ View online
INDEX
CONTENTS
19
3
5
Select the "Picture type" and "Paper source", and
click the "Next" button.
If you placed the original on the original table, select
If you placed the original on the original table, select
"Flatbed" for the "Paper source".
If you placed the original in the SPF/RSPF, select
"Document Feeder" for the "Paper source" and specify
the original size in "Page size".
You can click the "Preview" button to display the
preview image.
6
Specify a group name, format and folder for saving
the image, and then click the "Next" button.
JPG, BMP, TIF or PNG can be selected for the format.
JPG, BMP, TIF or PNG can be selected for the format.
To begin scanning, click the "Next" button.
Note
z
If you select "Document Feeder" for the "Paper
source" and click the "Preview" button, the top
original in the SPF/RSPF is previewed. The
previewed original is sent to the original exit
area, so you will need to return it to the SPF/
RSPF before starting the scanning job.
z
To adjust the resolution, picture type, brightness
and contrast settings, click the "Custom
settings" button.
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 2)
INDEX
CONTENTS
20
3
7
When scanning ends, the following screen will
appear. Select the next task you wish to perform,
and then click the "Next" button.
If you are ready to end the session, click "Nothing. I'm
If you are ready to end the session, click "Nothing. I'm
finished working with these pictures".
8
Click the "Finish" button.
The "Scanner and Camera Wizard" closes and the
The "Scanner and Camera Wizard" closes and the
scanned image is saved in the specified folder.
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 3)
INDEX
CONTENTS
21
3
Button Manager is a utility software to link scanning functions to the SCANNER key on the unit. This software enables
you to set scanning functions to six different scan menus, which will be linked the SCANNER key on the unit.
you to set scanning functions to six different scan menus, which will be linked the SCANNER key on the unit.
Reference:
To begin scanning using the unit's operation panel, settings must be established in the Control Panel after the Button Manager is
installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's
operation panel, see "USING THE SCANNER MODE" in the Operation Manual.
installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's
operation panel, see "USING THE SCANNER MODE" in the Operation Manual.
The functions of Button Manager are shown below.
You can specify and change your six scan menu options from six functions. Refer to
Button Manager Settings
to specify
and change the scan menu options.
Tab
Click to set scan menu
options.
options.
"Application Selection" area
Select the start-up application here.
"Help" button
Click this button to display the help file
for Button Manager.
for Button Manager.
"Apply" button
Click to save your settings without
closing the dialog box.
closing the dialog box.
"Cancel" button
Click this button to exit
the dialog box without
making any changes to
the settings.
the dialog box without
making any changes to
the settings.
"OK" button
Click to save your
settings, and exit the
dialog box.
settings, and exit the
dialog box.
Note
Some applications may limit
your choice of settings.
your choice of settings.
"Scan Setup" area
Set the scan conditions.
Note
Close the source application before using the SCANNER key on
the unit.
Outline of Button Manager
INDEX
CONTENTS
22
3
After being installed, Button Manager normally keeps active under the Windows operating system. Follow the steps
shown below to set scan options as you like.
For details on the settings in the setting screen of Button Manager, see Button Manager Help.
shown below to set scan options as you like.
For details on the settings in the setting screen of Button Manager, see Button Manager Help.
1
Right-click the Button Manager icon ( ) on the task
bar.
2
Select "Settings" from the displayed pop-up menu.
The setting screen of Button Manager will open.
The setting screen of Button Manager will open.
Reference:
Outline of Button Manager
3
Click the tab of the scan menu you want to set up.
4
Set up the start-up application in the "Application
Selection" area.
Reference:
Outline of Button Manager
5
Set up the "Color Mode", "Edge Enhancement" and
other scan settings in the "Scan Setup" area.
Reference:
Outline of Button Manager
6
Click the "OK" button.
You have completed the settings.
You have completed the settings.
Note
If the Button Manager icon does not appear on the
task bar, click the "start" button, select "All
Programs" ("Programs" on Windows 98/Me/2000),
select "SHARP MF Personal Series", and then
click "Button Manager" to start Button Manager.
Note
When "SPF" is selected in the ScanMenu, only
the original loaded in the SPF/RSPF can be
scanned. If an application other than "Sharpdesk"
is selected in the "Application Selection" area,
only one original can normally be scanned. If
"Sharpdesk" is selected, multiple originals can be
scanned.
Button Manager Settings
Click on the first or last page to see other AL-1555 (serv.man21) service manuals if exist.