Sharp AL-1457 (serv.man33) User Manual / Operation Manual ▷ View online
67
9
*
1
Feed paper lengthwise only.
*
2
Leading and trailing edges.
*
3
Along the other edges in totals.
*
4
Data transmission time is not included. (Only for printer)
*
5
Not including TD and drum cartridges.
Scanning speed
Max. 2.88ms/line
Memory
8 MB
Power supply
Local voltage
±
10% (For this copier’s power supply
requirement, see the name plate located on the back of
the unit.)
the unit.)
Power consumption
1000 W
Overall
dimensions
dimensions
Width
607.6mm
607.6mm
Depth
462.5mm 492.5mm
Weight (Approximately) *
5
16k
g
19k
g
Unit dimensions
Width
518mm 518mm
Depth
462.5mm
492.5mm
Height
295.6mm
380.4mm
Operating conditions
Temperature: 10°C to 30°C
Humidity: 20% to 85%
Humidity: 20% to 85%
Emulation
SHARP GDI
Interface port
USB interface (USB1.1 Standard) /
IEEE1284-compliant bi-directional parallel interface (Only
for printer)
IEEE1284-compliant bi-directional parallel interface (Only
for printer)
Noise level
Sound Power Level L
wA
(1B=10dB)
Copying: 6.0 [B], Standby: 3.7 [B]
Sound Pressure Level L
Sound Pressure Level L
pA
(bystander positions)
Copying: 46 [dB (A)], Standby: 23 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measurement according to
RAL-UZ 62)
(measurement according to
RAL-UZ 62)
Ozone: less than 0.02 m
g
/m
3
Dust: less than 0.075 m
g
/m
3
Styrene: less than 0.07 m
g
/m
3
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
Model
AL-1217
AL-1457
68
ABOUT SUPPLIES AND OPTIONS
When ordering supplies, please use the correct part numbers as listed below.
Supply list
* Based on copying onto letter-type paper at 5% toned area
(The life of the TD cartridge which has been included in the unit at the factory is
approximately 2,000 sheets.)
approximately 2,000 sheets.)
Interface cable
Please purchase the appropriate cable for your computer.
Parallel interface cable
IEEE 1284-Shielded type bi-directional parallel interface cable (2m Max.)
USB interface cable
Shielded twisted pair cable, high-speed transmission equivalent (2m Max.)
Be sure to use only genuine SHARP parts and supplies.
For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximise the
life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.
Supplies which are designed, engineered, and tested to maximise the
life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.
Supply
Part number
Usable life
TD cartridge
AL-110DC
Approx. 4,000 sheets
Drum cartridge
AL-100DR
Approx. 18,000 sheets
69
9
MOVING AND STORING THE UNIT
Moving instructions
When moving the unit, follow the procedure below.
1
Turn the power switch off and remove the power cord from the
outlet.
outlet.
2
Open the side cover and front cover, in that order. Remove the
TD cartridge and close the front cover and side cover, in that
order.
TD cartridge and close the front cover and side cover, in that
order.
To open and close the side cover and front cover, and to remove the TD
cartridge, see "TD CARTRIDGE REPLACEMENT" (p.55).
cartridge, see "TD CARTRIDGE REPLACEMENT" (p.55).
3
Raise the handle of the paper tray and pull the paper tray out
until it stops.
until it stops.
4
Push the centre of the pressure plate down until it locks in
place and lock the plate using the pressure plate lock which
has been stored in the front of the paper tray.
place and lock the plate using the pressure plate lock which
has been stored in the front of the paper tray.
5
Push the paper tray back into the unit.
6
Lock the scan head locking switch (p.9).
7
Close the multi-bypass tray and the paper output tray
extension, and attach the packing materials and tape which
were removed during installation of the unit. See "PREPARING
THE UNIT FOR INSTALLATION" (p.8).
extension, and attach the packing materials and tape which
were removed during installation of the unit. See "PREPARING
THE UNIT FOR INSTALLATION" (p.8).
8
Pack the unit into the carton. See "CHECKING PACKED
COMPONENTS AND ACCESSORIES" (p.8).
COMPONENTS AND ACCESSORIES" (p.8).
Proper storage
Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight
Store paper in the wrapper and lying flat.
• Paper stored out of the wrapper or in packages standing on end may curl or get
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight
Store paper in the wrapper and lying flat.
• Paper stored out of the wrapper or in packages standing on end may curl or get
damp, resulting in paper misfeeds.
When moving this unit, be sure to remove the TD cartridge in advance.
When shipping the unit, the scan head locking switch must be locked to
prevent shipping damage.
prevent shipping damage.
70
INDEX
A
Acrobat Reader ................................. 43
Alarm indicator
Alarm indicator
- Drum replacement required
indicator.............................. 6, 56, 60
- Misfeed indicator ................ 6, 60, 61
- TD cartridge replacement required
- TD cartridge replacement required
indicator.............................. 6, 55, 60
Appendix ........................................... 66
Auto clear time .................................. 53
Auto power shut-off mode ................. 53
Automatic exposure adjustment ........ 50
Auto clear time .................................. 53
Auto power shut-off mode ................. 53
Automatic exposure adjustment ........ 50
B
Before installation .............................. 20
Button Manager ........................... 19, 35
Bypass feed....................................... 17
Bypass paper guides ............... 5, 17, 18
Button Manager ........................... 19, 35
Bypass feed....................................... 17
Bypass paper guides ............... 5, 17, 18
C
Cautions
- Handling ......................................... 2
- Label............................................... 1
- Laser .............................................. 2
- Using .............................................. 1
- Label............................................... 1
- Laser .............................................. 2
- Using .............................................. 1
Charger cleaner............................. 5, 58
Checking packed components and
accessories ......................................... 8
Cleaning the unit
Checking packed components and
accessories ......................................... 8
Cleaning the unit
- Cabinet ......................................... 57
- Original cover ............................... 57
- Original table ................................ 57
- SPF .............................................. 57
- SPF scanning widow .................... 57
- Transfer charger........................... 58
- Original cover ............................... 57
- Original table ................................ 57
- SPF .............................................. 57
- SPF scanning widow .................... 57
- Transfer charger........................... 58
Clear key ................................. 6, 47, 54
Connecting the interface cable
Connecting the interface cable
- Parallel interface cable ................. 45
- USB interface cable...................... 45
- USB interface cable...................... 45
Conventions used in this manual and
online manual ...................................... 4
Copy flow........................................... 46
Copy quantity .................................... 49
Copy quantity key .................... 6, 49, 53
Copy ratio display key ................... 6, 51
Copy ratio selector indicator .......... 6, 51
Copy ratio selector key .................. 6, 51
online manual ...................................... 4
Copy flow........................................... 46
Copy quantity .................................... 49
Copy quantity key .................... 6, 49, 53
Copy ratio display key ................... 6, 51
Copy ratio selector indicator .......... 6, 51
Copy ratio selector key .................. 6, 51
D
Dark key ........................................ 6, 49
Display................................................. 6
Displaying total number of copies ..... 54
Disposing of TD cartridge.................. 55
Drum cartridge......................... 5, 56, 68
Drum cartridge replacement.............. 56
Drum replacement required
indicator................................... 6, 56, 60
Display................................................. 6
Displaying total number of copies ..... 54
Disposing of TD cartridge.................. 55
Drum cartridge......................... 5, 56, 68
Drum cartridge replacement.............. 56
Drum replacement required
indicator................................... 6, 56, 60
E
Exposure adjustment......................... 49
Exposure mode indicator............... 6, 49
Exposure mode selector key ......... 6, 49
Exposure mode indicator............... 6, 49
Exposure mode selector key ......... 6, 49
F
Flow of installation............................. 21
Front cover .......................................... 5
Fusing unit release lever ............... 5, 62
Front cover .......................................... 5
Fusing unit release lever ............... 5, 62
H
Handle ................................................. 5
Hardware and software
requirements ..................................... 20
How to print ....................................... 33
How to use the online manual ........... 43
Hardware and software
requirements ..................................... 20
How to print ....................................... 33
How to use the online manual ........... 43
I
Indicators on the operation panel ...... 32
Initial settings of operation panel....... 13
Installing the software.................. 19, 22
Installing the TD cartridge ................. 10
Interface
Initial settings of operation panel....... 13
Installing the software.................. 19, 22
Installing the TD cartridge ................. 10
Interface
- Parallel interface........................... 45
- USB interface ............................... 45
- USB interface ............................... 45
Interface cable................................... 68
Interrupt copying................................ 47
Introduction.......................................... 4
Interrupt copying................................ 47
Introduction.......................................... 4
L
Light and dark indicator ................. 6, 49
Light key ........................................ 6, 49
Loading paper ................................... 14
Loading the paper tray ...................... 15
Light key ........................................ 6, 49
Loading paper ................................... 14
Loading the paper tray ...................... 15
Click on the first or last page to see other AL-1457 (serv.man33) service manuals if exist.