Sharp AL-1456 (serv.man28) User Manual / Operation Manual ▷ View online
39
4
2
Place the original you wish to scan on the original table/SPF/
RSPF.
RSPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
(p.47).
3
Press the right copy quantity key to
display the number of the application that
you wish to use for scanning.
display the number of the application that
you wish to use for scanning.
The application numbers are initially as follows.
4
Press the start (
) key.
The selected application launches and scanning begins.
If the following screen appears, select Button Manager and click "OK". Button
Manager starts and the application associated with Button Manager starts. If you
want only Button Manager to start in this case, set up Button Manager for use in
Windows as explained in "Setting up the Button Manager" (p.34).
Manager starts and the application associated with Button Manager starts. If you
want only Button Manager to start in this case, set up Button Manager for use in
Windows as explained in "Setting up the Button Manager" (p.34).
Opening the scanner driver and scanning from your computer
Follow the steps below to open the scanner driver setup screen. As an example, this
instruction is given using Sharpdesk as an image capture application.
instruction is given using Sharpdesk as an image capture application.
Application
number
Application launched
SC1
Sharpdesk (if installed)
SC2
E-mail (your standard e-mail program in the
Windows OS you are using)
Windows OS you are using)
SC3
Fax (if a fax program is installed)
SC4
OCR (if an OCR program is installed)
SC5
Microsoft Word (if installed)
SC6
Any application set in Button Manager
•
Scanning is not possible during a copy and print job.
•
The method for starting the scanner driver differs depending on the
type of application. Refer to the manual or the help file of your
application.
type of application. Refer to the manual or the help file of your
application.
•
When using the scanner driver to scan an original that has been
placed in the SPF/RSPF. If you perform a pre-scan (see the online
manual or the help file for the scanner driver), the original in the SPF/
RSPF will be output to the exit area after scanning. To scan the
original after the pre-scan, place the original in the SPF/RSPF once
again.
placed in the SPF/RSPF. If you perform a pre-scan (see the online
manual or the help file for the scanner driver), the original in the SPF/
RSPF will be output to the exit area after scanning. To scan the
original after the pre-scan, place the original in the SPF/RSPF once
again.
40
Using the SHARP TWAIN
1
Place the original you wish to scan on the original table/SPF/RSPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
(p.47).
2
After starting Sharpdesk, click the
"File" menu and select "Select
Scanner".
"File" menu and select "Select
Scanner".
3
Select "SHARP Personal MFP
Series", and click the "Select"
button.
Series", and click the "Select"
button.
4
Select "Acquire Image" from
the "File" menu, or click the
"Acquire" button (
the "File" menu, or click the
"Acquire" button (
) .
5
Set the configuration for scanning (refer to the online manual
and help file), and click the "Scan" button.
and help file), and click the "Scan" button.
Scan is started.
If you use more than one scanning device, select the scanner
you want to use through the application. The method for
accessing the "Select Scanner" option, depends upon the
application. For more information, see the online manual or the
help file of your application.
you want to use through the application. The method for
accessing the "Select Scanner" option, depends upon the
application. For more information, see the online manual or the
help file of your application.
Click here
Click here
41
4
Scanning with the "Scanner and Camera Wizard" in Windows XP
Windows XP includes as a standard feature an image scanning function. The
procedure for scanning with the "Scanner and Camera Wizard" is explained here.
procedure for scanning with the "Scanner and Camera Wizard" is explained here.
1
Click the "start" button , select "Control
Panel", and click "Printers and Other
Hardware", and then click "Scanners
and Cameras" in the start menu. Click
the "SHARP AL-xxxx" (where xxxx is
the model name of your unit) icon and
click "Get picture" in "Imaging Tasks".
Panel", and click "Printers and Other
Hardware", and then click "Scanners
and Cameras" in the start menu. Click
the "SHARP AL-xxxx" (where xxxx is
the model name of your unit) icon and
click "Get picture" in "Imaging Tasks".
2
The "Scanner and Camera Wizard"
appears. Click "Next" and establish the
basic settings for scanning.
appears. Click "Next" and establish the
basic settings for scanning.
For information on the settings, see the
Windows XP help file. After completing each
setting, click "Next".
Windows XP help file. After completing each
setting, click "Next".
3
Select a name, format, and folder for the
scanned image.
scanned image.
For information on the image name, file format,
and folder, see the Windows XP help file.
and folder, see the Windows XP help file.
4
Scanning begins. When scanning ends,
select the next task you wish to perform.
select the next task you wish to perform.
For information on each selection, see the
Windows XP help file. To quit the "Scanner and
Camera Wizard", select "Nothing. I’m finished
working with these pictures." and click "Next".
Windows XP help file. To quit the "Scanner and
Camera Wizard", select "Nothing. I’m finished
working with these pictures." and click "Next".
5
Click "Finish" in the screen that appears.
The "Scanner and Camera Wizard" closes and the scanned image is saved.
To cancel scanning, click the "Cancel" button in the screen that is
displayed.
displayed.
42
HOW TO USE THE ONLINE MANUAL
The online manual provides detailed instructions for operating the unit as the printer
or scanner and a list of methods for dealing with printing or scanner problems.
To access the online manual, your computer must have Acrobat Reader 5.0 or a
later version. If it is not installed, refer to "Installing Acrobat Reader" (below).
or scanner and a list of methods for dealing with printing or scanner problems.
To access the online manual, your computer must have Acrobat Reader 5.0 or a
later version. If it is not installed, refer to "Installing Acrobat Reader" (below).
1
Turn on your computer.
2
Insert the supplied CD-ROM into your CD-ROM drive.
3
Click the "start" button, click "My Computer" (
), and then
double-click the CD-ROM (
) icon.
On Windows 95/98/Me/NT 4.0/2000, double-click "My Computer" (
), and
then double-click the CD-ROM (
) icon.
4
Double-click the "MANUAL" folder,
the "English" folder, and then the
"AL_1045_1255_1456_1555.pdf"
icon.
the "English" folder, and then the
"AL_1045_1255_1456_1555.pdf"
icon.
The following window will appear.
5
Click the
to read the online manual.
To close the online manual, click the (
) button located at the top-right of
the window.
•
The online manual can be printed out using Acrobat Reader. SHARP
recommends printing out the sections which you refer to regularly.
recommends printing out the sections which you refer to regularly.
•
Refer to "Help" of Acrobat Reader for more details on the operation
and function of Acrobat Reader.
and function of Acrobat Reader.
1045/1255/1456/1555 SERIES
Click on the first or last page to see other AL-1456 (serv.man28) service manuals if exist.