Sharp AL-1456 (serv.man28) User Manual / Operation Manual ▷ View online
35
4
Windows 98/Me/2000
To scan directly into an application using the Button Manager on Windows 98,
Windows Me and Windows 2000. Set the Event Manager properties to send only to
Button Manager as shown below.
Windows Me and Windows 2000. Set the Event Manager properties to send only to
Button Manager as shown below.
1
Click the "Start" button, select "Control Panel" from "Settings",
and open "Scanners and Cameras" in start menu.
and open "Scanners and Cameras" in start menu.
2
Select "AL-xxxx" (where xxxx is the model name of your unit)
and click the "Properties" button.
and click the "Properties" button.
In Windows Me,right click "AL-xxxx" (where xxxx is the model name of your
unit) and click the "Properties" in the menu that appears.
unit) and click the "Properties" in the menu that appears.
3
In the "Properties" screen, click the
"Events" tab.
"Events" tab.
4
Click the "Scanner event" button and select
"ScanMenu SC1" from the pull-down menu.
Select "Button Manager (SHARP Personal
MFP Series)" in "Send to this application"
and click "Apply".
"ScanMenu SC1" from the pull-down menu.
Select "Button Manager (SHARP Personal
MFP Series)" in "Send to this application"
and click "Apply".
5
Repeat step 4 to set "ScanMenu SC2" through "ScanMenu SC6".
Click the "Select an Event" and select "ScanMenu SC2" from the pull-down
menu. Select "Button Manager (SHARP Personal MFP Series)" in "Start this
program" and click "Apply". Do the same for each ScanMenu through
"Scanmenu SC6".
When the settings have been completed, click the "OK" button to close the
screen. When the settings have been completed in Windows, start the
Button Manager. Adjust detailed settings and then scan an image from the
unit. For the procedures for starting Button Manager and adjusting settings,
see "Scan Parameter Settings Dialog Box (p.36)".
menu. Select "Button Manager (SHARP Personal MFP Series)" in "Start this
program" and click "Apply". Do the same for each ScanMenu through
"Scanmenu SC6".
When the settings have been completed, click the "OK" button to close the
screen. When the settings have been completed in Windows, start the
Button Manager. Adjust detailed settings and then scan an image from the
unit. For the procedures for starting Button Manager and adjusting settings,
see "Scan Parameter Settings Dialog Box (p.36)".
In Windows Me, it occasionally happens that the "Scanners and
Cameras" icon does not appear immediately after installation of
the MFP driver is completed. If the icon does not appear, click
"View all Control Panel options" in the Control Panel and display
the "Scanner and Cameras" icon.
Cameras" icon does not appear immediately after installation of
the MFP driver is completed. If the icon does not appear, click
"View all Control Panel options" in the Control Panel and display
the "Scanner and Cameras" icon.
If other application are shown,
deselect the checkboxes for the other
applications and leave only the Button
Manager checkbox selected.
deselect the checkboxes for the other
applications and leave only the Button
Manager checkbox selected.
SHARP AL-xxxx
SHARP AL-xxxx Properties
SHARP AL-xxxx
SHARP AL-xxxx Properties
36
Scan Parameter Settings Dialog Box
After you have completed the Button Manager settings in Windows, configure the
scan settings in Button Manager.
To configure the scan settings in Button Manager, right click the icon in the Taskbar
and select "Settings" from the menu that appears.
For details on configuring the scan settings in Button Manager, see the online
manual or the help file.
scan settings in Button Manager.
To configure the scan settings in Button Manager, right click the icon in the Taskbar
and select "Settings" from the menu that appears.
For details on configuring the scan settings in Button Manager, see the online
manual or the help file.
This is the corresponding setting in the
Button Manager to automatically send
multiple images from the SPF/RSPF in
full color at 75 dpi to Sharpdesk using
the operation panel "SC1" scanner key
selection.
Button Manager to automatically send
multiple images from the SPF/RSPF in
full color at 75 dpi to Sharpdesk using
the operation panel "SC1" scanner key
selection.
This dialog shows the SC1 event set to go directly to Button Manager.
With the Button Manager set to send the image to Sharpdesk. (factory
default setting) Sharpdesk will open after acquiring the image
automatically.
With the Button Manager set to send the image to Sharpdesk. (factory
default setting) Sharpdesk will open after acquiring the image
automatically.
37
4
Flow of the Button Manager setting
The Button Manager can directly handle a AL-xxxx (where xxxx is the model name of
your unit) series device event and start your selected application according to the
scan setting made on the AL-xxxx (where xxxx is the model name of your unit) front
panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
your unit) series device event and start your selected application according to the
scan setting made on the AL-xxxx (where xxxx is the model name of your unit) front
panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
The settings for the Windows Event Manager for the
SHARP AL-xxxx (where xxxx is the model name of
your unit) device allow the user to take advantage of
the Sharp Button Manager to take control of events
from Windows and send scanned images to any of
six different applications according to the Button
Manager setting.
This can be done with the Windows OS showing the
Event Manager selection dialog or directly into a
selected application if the Button Manager is the only
allowed handler for device events from the SHARP
AL-xxxx (where xxxx is the model name of your unit).
This is done by changing the Windows device
settings for the AL-xxxx (where xxxx is the model
name of your unit) in the Scanner and Camera
device settings in the Control Panel.
SHARP AL-xxxx (where xxxx is the model name of
your unit) device allow the user to take advantage of
the Sharp Button Manager to take control of events
from Windows and send scanned images to any of
six different applications according to the Button
Manager setting.
This can be done with the Windows OS showing the
Event Manager selection dialog or directly into a
selected application if the Button Manager is the only
allowed handler for device events from the SHARP
AL-xxxx (where xxxx is the model name of your unit).
This is done by changing the Windows device
settings for the AL-xxxx (where xxxx is the model
name of your unit) in the Scanner and Camera
device settings in the Control Panel.
Scanner AL-
xxxx (where
xxxx is the
model name of
your unit)
SCANNER key
pressed.
xxxx (where
xxxx is the
model name of
your unit)
SCANNER key
pressed.
Event Manager
Windows OS
Button Manager
No Selection
dialog is
displayed.
dialog is
displayed.
User selected
application
application
The user
application
opens.
application
opens.
This is the Control Panel
Properties dialog for "Scanners and
Cameras".
The AL-1555 is shown selected.
Properties dialog for "Scanners and
Cameras".
The AL-1555 is shown selected.
SHARP AL-1555
38
All About The Windows Event Manager and scanner events in
Windows 98, Windows Me, Windows 2000 and Windows XP.
Windows 98, Windows Me, Windows 2000 and Windows XP.
Windows Platforms provide a mechanism for software to handle external events for
a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your
unit) series products. This mechanism is controlled by the device manager on a
device basis. Applications that can handle events from a scanner/camera device
register with the Windows Event Manager and shown as available in the registered
applications. The path an event takes to get to the user's selected application
depends upon the event settings for the device.
a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your
unit) series products. This mechanism is controlled by the device manager on a
device basis. Applications that can handle events from a scanner/camera device
register with the Windows Event Manager and shown as available in the registered
applications. The path an event takes to get to the user's selected application
depends upon the event settings for the device.
Using the SCANNER key to begin scanning
1
Press the SCANNER (
) key.
The unit enters scan mode.
•
Scanning is not possible during a copy job.
•
If the unit is used to begin a scan job during a print job using the parallel
interface connection or the USB interface connection, the scan job will be
stored and scanning will begin when the print job is completed.
interface connection or the USB interface connection, the scan job will be
stored and scanning will begin when the print job is completed.
•
When scanning an original that has been placed in the SPF/RSPF, only
one original can be placed unless you are using Sharpdesk.
one original can be placed unless you are using Sharpdesk.
Scanner AL-
xxxx (where
xxxx is the
model name of
your unit)
SCANNER key
pressed.
xxxx (where
xxxx is the
model name of
your unit)
SCANNER key
pressed.
Event Manager
Windows OS
Event Manager
selection dialog
selection dialog
Displayed on
screen
screen
User selects an
application.
application.
The user
application
opens.
application
opens.
This is the Windows Event Manager
Selection Dialog.
Shown are 2 applications registered
to handle the scanner event from the
AL-xxxx (where xxxx is the model name
of your unit) device.
Selection Dialog.
Shown are 2 applications registered
to handle the scanner event from the
AL-xxxx (where xxxx is the model name
of your unit) device.
Event on device: SHARP AL-1555
Click on the first or last page to see other AL-1456 (serv.man28) service manuals if exist.