Sharp AL-1217 (serv.man17) Service Manual ▷ View online
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 14
3) Remove three screws and remove the single manual feed upper
frame.
4) Remove the PPD1 sensor PWB.
5) Remove the E-ring and remove the manual paper feed transport
roller.
6) Remove the cassette detection switch.
1)
2)
1)
3)
1)
2)
Wire treatment
3)
3)
4)
1)
2)
1)
2)
3)
Wire treatment
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 15
7) Remove the multi cover.
Multi unit
1) Remove the screw and remove the multi upper cover.
2) Remove the screw and remove the side door detection unit.
3) Remove three screws and remove the multi paper feed upper
frame.
Multi cover
2)
1)
1)
2)
Back
Wire treatment
1)
2)
1)
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 16
4) Remove two screws and remove the multi feed bracket unit from
the multi paper feed upper frame.
5) Remove three E-rings and remove the manual paper feed roller
B9.
6) Remove the pick-up roller.
7) Cut the binding band and remove the multi paper feed solenoid.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
2)
2)
1)
1)
2)
1)
1)
1)
3)
L
O C
K
T
O
K
2)
1)
1)
2)
3)
Multi paper feed
solenoid
solenoid
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 17
D. Pressure plate holder attachment
1) Attach the pressure plate holder so that the resin section is not
covered with the seal M1-N.
7. Rear frame section
A. List
B. Disassembly procedure
1) Remove four screws, and remove the rear cabinet and the rear
cabinet cover.
2) Disconnect the connector.
3) Remove two screws, and remove the scanner motor.
4) Remove two screws and one harness, and remove the main
motor.
5) Remove two screws and one connector, and remove the exhaust
fan motor.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
No.
Part name Ref.
1
Mirror motor
2
Main motor
3
Exhaust fan motor
Pressure plate
holder
holder
Seal M1-N
Attachment
reference
reference
Attachment
reference
reference
2)
1)
1)
1)
1)
1)
2)
3)
1)
2)
3)
1)
2)
3)
Click on the first or last page to see other AL-1217 (serv.man17) service manuals if exist.