DOWNLOAD Sharp AL-1000 / AL-1010 (serv.man7) Service Manual ↓ Size: 280.72 KB | Pages: 7 in PDF or view online for FREE

Model
AL-1000 AL-1010 (serv.man7)
Pages
7
Size
280.72 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AL1000 Unpacking and Installation
File
al-1000-al-1010-sm7.pdf
Date
PREV: Sharp AL-1000 / AL-1010 (serv.man6) Service Manual

Sharp AL-1000 / AL-1010 (serv.man7) Service Manual ▷ View online

[5] UNPACKING AND INSTALLATION
1. A WORD ON COPIER INSTALLATION
Improper installation may damage the copier. Please note the
following during initial installation and whenever the copier is
moved.
Do not install your copier in areas that are:
●
damp, humid, or very dusty
●
exposed to direct sunlight
●
poorly ventilated
●
subject to extreme temperature or humidity changes, e.g.,
near an air conditioner or heater.
Be sure to allow the required space around the machine for
servicing and proper ventilation.
2. CHECKING PACKED COMPONENTS AND
ACCESSORIES
Open the carton and check if the following components and ac-
cessories are included.
8"(20cm)
4"
(10cm)
4"
(10cm)
8"(20cm)
Copier
Power cord
TD cartridge
Drum cartridge 
(installed in copier)
Operation manual
AL-1000/1010
5-1
3. UNPACKING
Unpack the copier and carry it to the installation location by
holding the handles on both sides of the copier.
4. REMOVING PROTECTIVE PACKING
MATERIALS
(1) Remove pieces of tape (a), (b), (c), (d), (e), (f), (g) and (h)
and protective cover (i). Then open the original cover and
remove protective materials (j) and (k).
(2) Use a coin (or suitable object) to remove the screw.
Store the screw in the paper tray because it will be used if
the copier has to be moved.
5. INSTALLING THE TD CARTRIDGE
(1) Open the side cover while pressing the side cover open
button.
(2) Remove the CAUTION tape from the front cover and
remove the two protective pins from the fusing unit by pull-
ing the strings upward one at a time.
(3) Push gently on both sides of the front cover to open the
cover.
(4) Remove the TD cartridge from the bag. Remove the
protective paper. Hold the cartridge on both sides and
shake it horizontally four or five times.
(5) Hold the tab of the protective cover and pull the tab to your
side to remove the cover.
(6) Gently insert the TD cartridge until it locks in place, while
pushing the lock button.
Lock button
a
b
c
e
h
f
g
d
Protective pins
CAUTION tape
AL-1000/1010
5-2
(7) Close the front cover and then the side cover by pressing
the round projections near the side cover open button.
6. LOADING COPY PAPER (installing the
paper tray)
(1) Raise the handle of the paper tray and pull the paper tray
out until it stops.
(2) Remove the pressure plate lock. Rotate the pressure plate
lock in the direction of the arrow to remove it while pressing
down the pressure plate of the paper tray.
(3) Store the pressure plate lock which has been removed in
step 2 and the screw which has been removed when un-
packing (see page 5-2, step 2 of REMOVING PROTEC-
TIVE PACKING MATERIALS) in the front of the paper tray.
To store the pressure plate lock, rotate the lock to fix it on
the relevant location.
(4) Adjust the paper guides on the paper tray to the copy paper
width and length.Squeeze the lever of paper guide (A) a
and slide the guide to match with the width of the paper.
Move paper guide (B) to the appropriate slot as marked on
the tray.
(5) Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
(6) Gently push the paper tray back into the copier.
7. PLUGGING IN THE COPIER
(1) Ensure that the power switch of the copier is in the OFF
position. Insert the attached power cord into the power cord
socket at the rear of the copier.
(2) Plug the other end of the power cord into the nearest outlet.
Pressure plate lock
Screw
Paper guide (A)
Paper guide (B)
AL-1000/1010
5-3
(7) Close the front cover and then the side cover by pressing
the round projections near the side cover open button.
6. LOADING COPY PAPER (installing the
paper tray)
(1) Raise the handle of the paper tray and pull the paper tray
out until it stops.
(2) Remove the pressure plate lock. Rotate the pressure plate
lock in the direction of the arrow to remove it while pressing
down the pressure plate of the paper tray.
(3) Store the pressure plate lock which has been removed in
step 2 and the screw which has been removed when un-
packing (see page 5-2, step 2 of REMOVING PROTEC-
TIVE PACKING MATERIALS) in the front of the paper tray.
To store the pressure plate lock, rotate the lock to fix it on
the relevant location.
(4) Adjust the paper guides on the paper tray to the copy paper
width and length.Squeeze the lever of paper guide (A) a
and slide the guide to match with the width of the paper.
Move paper guide (B) to the appropriate slot as marked on
the tray.
(5) Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
(6) Gently push the paper tray back into the copier.
7. PLUGGING IN THE COPIER
(1) Ensure that the power switch of the copier is in the OFF
position. Insert the attached power cord into the power cord
socket at the rear of the copier.
(2) Plug the other end of the power cord into the nearest outlet.
Pressure plate lock
Screw
Paper guide (A)
Paper guide (B)
AL-1000/1010
5-3
Page of 7
Display

Sharp AL-1000 / AL-1010 (serv.man7) Service Manual ▷ Download

Found More:

AL-1000 / AL-1010 (serv.man7) Service Manuals

Preview DownloadPagesSize
AL-1000 AL-1010 (serv.man15) AL1000 Circuit Diagram Service Manual 16 1.3 MB
AL-1000 AL-1010 (serv.man3) AL1000 General Service Manual 5 50.54 KB
AL-1000 AL-1010 (serv.man4) AL1000 Specifications Service Manual 8 56.05 KB
AL-1000 AL-1010 (serv.man5) AL1000 Consumable Parts Service Manual 5 62.32 KB
AL-1000 AL-1010 (serv.man6) AL1000 External Views and Internal Structure Service Manual 11 233.69 KB
AL-1000 AL-1010 (serv.man8) AL1000 Copying Process Service Manual 8 88.22 KB
AL-1000 AL-1010 (serv.man9) AL1000 Operational Descriptions Service Manual 12 246.51 KB
AL-1000 AL-1010 (serv.man10) AL1000 Disassembly and Assembly Service Manual 21 1.6 MB
AL-1000 AL-1010 (serv.man11) AL1000 Adjustments Service Manual 14 300.73 KB
AL-1000 AL-1010 (serv.man12) AL1000 Simulation, Trouble Codes Service Manual 15 91.31 KB
AL-1000 AL-1010 (serv.man13) AL1000 User Programs Service Manual 5 56.29 KB
AL-1000 AL-1010 (serv.man14) AL1000 Electrical Section Service Manual 25 246.22 KB
AL-1000 AL-1010 (serv.man26) AL1000 1220 1520 1530-Operation Manuals User Manual / Operation Manual 34 322.12 KB
AL-1000 AL-1010 (serv.man16) Information of parts change Service Manual / Parts Guide 2 28.25 KB
AL-1000 AL-1010 (serv.man17) Information of parts change. Service Manual / Parts Guide 4 30.17 KB
AL-1000 AL-1010 (serv.man18) Strength increase of the turn over gate to prevent breakage. Service Manual / Parts Guide 3 58.91 KB
AL-1000 AL-1010 (serv.man19) Information of parts change To improve productivity, the L pulley has been changed Service Manual / Parts Guide 2 20.3 KB
AL-1000 AL-1010 (serv.man20) Parts Guide-Sections 1 to 4 Exteriors Original Cover Unit Operation Panel Side Door Unit Service Manual / Parts Guide 7 686.32 KB
AL-1000 AL-1010 (serv.man21) Parts Guide-Sections 5 to 9 Optical Frame 1 Optical Frame Unit 2 LSU Unit Delivery Paper Guide Unit Service Manual / Parts Guide 7 745.04 KB
AL-1000 AL-1010 (serv.man22) Parts Guide-Sections 10 to 13 Middle Frame Base Plate Unit 1 Base Plate Unit 2 Fusing Unit Service Manual / Parts Guide 9 1005.62 KB
AL-1000 AL-1010 (serv.man23) Parts Guide-Sections 14 to 20 Drive Unit Single Manual Paper Feeding Cover Unit.AL1000 Multi Manual Paper Feeding Cover Unit.AL1000-AL1200 Single Manual Paper Feeding Unit.AL1000 Multi Manual Paper Feeding Unit.Al1000-AL1200 Socket Holder Unit TC Case Unit Service Manual / Parts Guide 9 965.49 KB
AL-1000 AL-1010 (serv.man24) Parts Guide-Sections 21 to 23 250 Sheet Tray Harness Packing Materials Accessories Service Manual / Parts Guide 5 544.44 KB
AL-1000 AL-1010 (serv.man25) Parts Guide-Sections 24 to Index MCU PWB Operation PWB MFD Sensor PWB POD Sensor PWB PPD1 Sensor PWB PPD2 Sensor PWB DC Power Supply PWB Index Service Manual / Parts Guide 13 2.19 MB
AL-1000 AL-1010 PARTS SUCH AS SIDE DOOR DETECT SWITCH UNIT CHANGE IN SHAPE FOR PRODUCTIVITY IMPROVEMENT Service Manual / Specification 3 162.03 KB
AL-1000 AL-1010 (serv.man2) AL1000 AL1220 Specifications Service Manual / Specification 4 15.1 KB
AL-1000 AL-1010 (serv.man48) Change of the harness between ICU and CCD and disuse of the CCD harness cover sheet. Service Manual / Technical Bulletin 1 63.92 KB
AL-1000 AL-1010 (serv.man60) 1.Change of the copy lamp unit. 2.Change of the ROM version. 3.Change of the parts for the fax panel PWB. 4.Change of the software switches for fax. 5.Disuse of the service label. (WHITE) Service Manual / Technical Bulletin 3 152.33 KB
AL-1000 AL-1010 (serv.man61) Change of the parts manufacturing place. (WHITE) Service Manual / Technical Bulletin 3 149.32 KB
AL-1000 AL-1010 (serv.man62) 1.Change of the MCU PWB memory connector. 2.Shape change of the transport paper guide. 3.Change of the shaft. 4.Change of the copy lamp unit. (WHITE) Service Manual / Technical Bulletin 3 159.28 KB
AL-1000 AL-1010 (serv.man63) 1.Disuse Of Parts Due To Change Of The Optical Base Plate. 2.Change Of The USB PWB. 3.Change Of The LSU Unit. (WHITE) Service Manual / Technical Bulletin 4 194.19 KB
AL-1000 AL-1010 (serv.man64) Change Of The Photoconductor. (WHITE) Service Manual / Technical Bulletin 1 61.61 KB
AL-1000 AL-1010 (serv.man65) Correspondance To CE. (WHITE) Service Manual / Technical Bulletin 2 81.83 KB
AL-1000 AL-1010 (serv.man66) Information About The Parts Change. (WHITE) Service Manual / Technical Bulletin 3 113.19 KB
AL-1000 AL-1010 (serv.man67) 1.Material Change For Environmental Protection. 2.Change Of The SPF Interface Harness. 3.Change Of The MCU PWB Memory Connector. 4.Countermeasure Against Breakage Of The 2nd Connecting Gear Tooth. (WHITE) Service Manual / Technical Bulletin 3 72.15 KB
AL-1000 AL-1010 (serv.man68) 1.Change Of MCU PWB Connector. 2.Shape Change Of Scraper. (WHITE) Service Manual / Technical Bulletin 2 73.3 KB
AL-1000 AL-1010 (serv.man59) 1.Change of the DV side sheet F R. 2.Change of the GDI USB PWB. (WHITE) Service Manual / Technical Bulletin 2 152.78 KB
AL-1000 AL-1010 (serv.man69) 1.Disuse Of Parts Due To Change Of The Optical Base Plate. 2.Change Of the USB PWB. 3.Change Of The LSU Unit. (WHITE) Service Manual / Technical Bulletin 4 113.42 KB
AL-1000 AL-1010 (serv.man70) Increase Of Strength Of The Fusing Gear. (WHITE) Service Manual / Technical Bulletin 1 62.33 KB
AL-1000 AL-1010 (serv.man71) Shape Change Of Delivery Paper Guide. (WHITE) Service Manual / Technical Bulletin 2 93.63 KB
AL-1000 AL-1010 (serv.man72) Change Of Molding Material. (WHITE) Service Manual / Technical Bulletin 1 66.93 KB
AL-1000 AL-1010 (serv.man73) Change Of LSU Unit. (WHITE) Service Manual / Technical Bulletin 3 96.86 KB
AL-1000 AL-1010 (serv.man74) 1.Change Of Lamp Unit. 2.Change Of Clutch Springs. 3.Change Of HL Harness 2. 4.Shape Change Of Door Switch Spring. (WHITE) Service Manual / Technical Bulletin 3 107.34 KB
AL-1000 AL-1010 (serv.man75) 1.Shape Change Of Base Tray. 2.Shape Change Of Paper Guide. (WHITE) Service Manual / Technical Bulletin 2 107.82 KB
AL-1000 AL-1010 (serv.man76) 1.Increase Of Sucking Force Of PU Solenoid. 2.Shape Change Of Stopper Arm. 3.Shape Change Of Base Plate Rib Sheet. (WHITE) Service Manual / Technical Bulletin 2 77.84 KB
AL-1000 AL-1010 (serv.man77) 1.Addition Of Lens Cleaner Unit. 2.Correction Of Parts Guide. 3.Change Of CCD PWB Unit. 4.Addition Of Cores To Correspond To the FCC. (WHITE) Service Manual / Technical Bulletin 3 128.03 KB
AL-1000 AL-1010 (serv.man78) 1.Countermeasure Against Abnormal Noise In The Single Manual Paper Feeding Unit. 2.Shape Change Of Paper Feeding Actuator Spring. 3.Disuse Of Energy Star Label. 4.Shape Change Of OC AD SPF. 5.Shape Change Of Right Cabinet SPF. (WHITE) Service Manual / Technical Bulletin 3 100.13 KB
AL-1000 AL-1010 (serv.man79) 1.Change Of Operation Explanation Label. 2.Improvement Of Print Quality. 3.Countermeasure Against Stains On The Rear Side. (WHITE) Service Manual / Technical Bulletin 3 118.21 KB
AL-1000 AL-1010 (serv.man80) 1.Shape Change Of Driven Shaft Earth Spring. 2.Shape Change Of PG Earth Sheet. 3.Shape Change Of Side Door Inner Frame. 4.Shape Change Of PWB Cover. (WHITE) Service Manual / Technical Bulletin 3 75.94 KB
AL-1000 AL-1010 (serv.man81) Providing The Service Parts Of Components Of Copy Lamp Unit. (WHITE) Service Manual / Technical Bulletin 5 449.47 KB
AL-1000 AL-1010 (serv.man82) 1.Shape Change Of Semicircular Roller Claw. 2.Shape Change Of Fusing Scraper. (WHITE) Service Manual / Technical Bulletin 2 45.71 KB
AL-1000 AL-1010 (serv.man83) Parts Guide Correction. (WHITE) Service Manual / Technical Bulletin 1 21.97 KB
AL-1000 AL-1010 (serv.man84) 1.Lens Unit Change. 2.Parts Change For Better Workability. (WHITE) Service Manual / Technical Bulletin 2 62.08 KB
AL-1000 AL-1010 (serv.man85) 005-Sharp UK Technical Website (PREVIOUSLY SENT OUT AS FF COP 075) Service Manual / Technical Bulletin 1 14.75 KB
AL-1000 AL-1010 (serv.man86) 004-New Systems Support Team Systems Support Hotline (PREVIOUSLY SENT OUT AS FF COP 064) Service Manual / Technical Bulletin 1 9.96 KB
AL-1000 AL-1010 (serv.man87) 003-EPROM Upgrade Exchange Scheme (PREVIOUSLY SENT OUT AS FF COP 062) Service Manual / Technical Bulletin 1 10.34 KB
AL-1000 AL-1010 (serv.man88) 002-Change to Copier Transportation Method (PREVIOUSLY SENT OUT AS FF COP 012) Service Manual / Technical Bulletin 1 8.74 KB
AL-1000 AL-1010 (serv.man89) 001-Copier Hotline Telephone Number Change (PREVIOUSLY SENT OUT AS FF COP 002 Service Manual / Technical Bulletin 1 10.3 KB
AL-1000 AL-1010 (serv.man57) Supply of the paper feed roller as a service part. (WHITE) Service Manual / Technical Bulletin 1 126.01 KB
AL-1000 AL-1010 (serv.man27) Change in material of turn plate sheet. Service Manual / Technical Bulletin 3 57.76 KB
AL-1000 AL-1010 (serv.man28) MODIFICATION OF PAPER FEED ROLLER HOLDER ETC. TO IMPROVE PRODUCTIVITY Service Manual / Technical Bulletin 5 290.28 KB
AL-1000 AL-1010 (serv.man29) PICK UP ROLLER ON MULTI PAPER FEED UNIT CHANGE IN SHAPE Service Manual / Technical Bulletin 2 26.52 KB
AL-1000 AL-1010 (serv.man30) Parts Changes. Service Manual / Technical Bulletin 2 29.35 KB
AL-1000 AL-1010 (serv.man31) Improvement of the scanner's dust-proof property. Service Manual / Technical Bulletin 6 558.43 KB
AL-1000 AL-1010 (serv.man32) 1 Changing the SPF photo sensor to comply with RoHS. 2 Changing the solenoids to comply with RoHS. 3 Shape change of the 250 tray side plates F R. 4 Shape change of the open and shut exterior. Service Manual / Technical Bulletin 7 162.96 KB
AL-1000 AL-1010 (serv.man33) Information of parts change, 1 Transport belt change, 2 MFD sensor PWB change, 3 Transport clutch change, 4 Standardisation of separator pawl, 5 POD PPD1 sensor PWB change. Service Manual / Technical Bulletin 5 302.36 KB
AL-1000 AL-1010 (serv.man34) 1. Rear cover change, 2. Scanner motor change, 3. Shape change of the u-turn guide lower. Service Manual / Technical Bulletin 3 69.41 KB
AL-1000 AL-1010 (serv.man35) 1 Changing the 250 sheet cassette pawls F and R to comply with RoHS. 2 Changing the SPF hinges to comply with RoHS. Service Manual / Technical Bulletin 3 76.67 KB
AL-1000 AL-1010 (serv.man36) Change of parts Service Manual / Technical Bulletin 2 29.75 KB
AL-1000 AL-1010 (serv.man37) Countermeasure against noise when operating the machine Service Manual / Technical Bulletin 2 549.44 KB
AL-1000 AL-1010 (serv.man38) Part change information Service Manual / Technical Bulletin 1 23.96 KB
AL-1000 AL-1010 (serv.man39) New supply of MCU PWB Service Manual / Technical Bulletin 2 393.59 KB
AL-1000 AL-1010 (serv.man40) Change of the ICU-CCD harness and disuse of the optical sheet Service Manual / Technical Bulletin 1 19.61 KB
AL-1000 AL-1010 (serv.man41) Parts change information Service Manual / Technical Bulletin 1 326.8 KB
AL-1000 AL-1010 (serv.man43) Puma series broken base Service Manual / Technical Bulletin 5 2.15 MB
AL-1000 AL-1010 (serv.man58) Material change of the fusing fear (45T). (WHITE) Service Manual / Technical Bulletin 1 127.82 KB
AL-1000 AL-1010 (serv.man56) Correction of numerical values in the Caution On Laser Section of service manual. (WHITE) Service Manual / Technical Bulletin 1 40.85 KB
AL-1000 AL-1010 (serv.man55) Change of the control ROM. (WHITE) Service Manual / Technical Bulletin 1 36.13 KB
AL-1000 AL-1010 (serv.man54) Correction of numerical values in the Caution On Laser section. (WHITE) Service Manual / Technical Bulletin 1 71 KB
AL-1000 AL-1010 (serv.man53) Addition of CCD harness cover sheet. (WHITE) Service Manual / Technical Bulletin 2 109.66 KB
AL-1000 AL-1010 (serv.man52) Change of the fan. (WHITE) Service Manual / Technical Bulletin 1 63.85 KB
AL-1000 AL-1010 (serv.man51) Change of the DV side sheet F R. (WHITE) Service Manual / Technical Bulletin 2 105.76 KB
AL-1000 AL-1010 (serv.man50) Change of the service parts manufacturing location. (WHITE) Service Manual / Technical Bulletin 2 83.08 KB
AL-1000 AL-1010 (serv.man49) Change of the operation PWB fixing screws. Service Manual / Technical Bulletin 1 86.19 KB
AL-1000 AL-1010 (serv.man47) Parts change. Service Manual / Technical Bulletin 1 66.32 KB
AL-1000 AL-1010 (serv.man46) Parts change (IC, scraper) Service Manual / Technical Bulletin 1 23.85 KB
AL-1000 AL-1010 (serv.man45) Increase of margin of waste toner overflow Service Manual / Technical Bulletin 1 27.33 KB
AL-1000 AL-1010 (serv.man44) Part change (PG earth sheet) Service Manual / Technical Bulletin 1 45.09 KB
AL-1000 AL-1010 (serv.man42) Parts change information Service Manual / Technical Bulletin 1 21.6 KB
AL-1000 AL-1010 (serv.man90) MSDS F-30831 Regulatory Data 2 11.51 KB
AL-1000 AL-1010 (serv.man91) MSDS F-00831 Regulatory Data 2 12.28 KB
AL-1000 AL-1010 (serv.man92) Environmental Data Sheet Regulatory Data 1 4.73 KB
AL-1000 AL-1010 (serv.man93) Packaging Weights Data Regulatory Data 1 5.43 KB

RANDOM: