Sharp AL-1000 / AL-1010 (serv.man26) User Manual / Operation Manual ▷ View online
4
1
Getting started
INSTALLING THE OPTIONAL PRINTER
UPGRADE KIT
UPGRADE KIT
To install the printer board and memory, be sure to follow the precautions below.
Be sure to turn off this machine and your computer and remove the power cord
before starting installation. If not, an electric shock or injury may result.
before starting installation. If not, an electric shock or injury may result.
●
Do not touch the chips, circuits, and connectors on the printer board and
memory board directly with your hands. Doing so may damage them through
static electricity.
memory board directly with your hands. Doing so may damage them through
static electricity.
●
Discharge the static electricity in your body by touching a grounded
metal part before starting installation.
metal part before starting installation.
●
To protect the printer board and memory from static damage, remove them
from protective bags just before starting work.
from protective bags just before starting work.
●
Do not touch any object which easily generates static electricity (such as a
computer display) with your hand.
computer display) with your hand.
●
Do not subject the printer board and memory to undue shock.
●
Do not put the printer board or memory in a location which easily
generates static electricity (such as on a carpet).
generates static electricity (such as on a carpet).
Checking packed components and accessories
Open the carton and check if the following components and accessories are included.
Interface cable ... 1
(for IBM PC/AT or compatible computers)
Printer board ... 1
Memory ... 1*
Printer driver
(CD-ROM) ... 1
(CD-ROM) ... 1
Screwdriver ... 1
Screws ... 4
Operation manual ... 1
* In some models, the memory has been already installed in the machine and is not supplied
in the printer upgrade kit (AL-10PK).
If anything is damaged or not included, contact your SHARP Service Center.
5
1
Getting started
INSTALLING THE OPTIONAL PRINTER UPGRADE KIT
Removing the cabinet cover and board cover
1
Ensure that the power switch on the copier is in the off position. Remove the power
cord from the power cord socket at the rear of the copier.
cord from the power cord socket at the rear of the copier.
2
Remove the screw from the cabinet cover at the rear side of the machine using the
supplied screwdriver.
supplied screwdriver.
3
Slide the cabinet cover in the direction indicated by the arrow and pull the cover while
raising it a little to remove it.
raising it a little to remove it.
4
Remove the three screws from the board cover.
6
1
Getting started
INSTALLING THE OPTIONAL PRINTER UPGRADE KIT
5
Open the board cover in the direction indicated by the arrow and then remove it.
Installing the printer board
1
Before installing the printer board, be sure to read the precautions on page 4.
2
Remove the printer board from the protective bag.
3
Install the printer board so that the parallel interface connector of the board is fitted
into the hole for the connector.
into the hole for the connector.
Hole for the connector
4
Secure the printer board using the supplied four screws.
7
1
Getting started
INSTALLING THE OPTIONAL PRINTER UPGRADE KIT
5
Connect the board cable to the connector of the machine.
Installing the memory
If the memory is not supplied in the printer upgrade kit (AL-10PK), proceed to the “Replacing
the cabinet cover and board cover” subsection.
the cabinet cover and board cover” subsection.
1
Before installing the memory, be sure to read the precautions on page 4.
2
Remove the memory from the protective bag.
3
Check the orientation of the connector on the memory board and the connector on
the machine, and connect them securely.
the machine, and connect them securely.
Replacing the cabinet cover and board cover
1
Reattach the board cover in the direction indicated by the arrow.
Click on the first or last page to see other AL-1000 / AL-1010 (serv.man26) service manuals if exist.