Sharp PN-Y475 Service Manual ▷ View online
PN-Y325/PN/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY (PN-Y425/Y475/Y555) 7 - 13
5) Remove a bezel.
6) Remove a screw and remove LED/KEY PWB.
PN-Y325/PN/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY (PN-Y425/Y475/Y555) 7 - 14
<Caution for attachment of LED/IR cable>
- A new double-sided tape must be adhered to the LED/IR cable after removal.
- Refer to the illustration below and adhere the tape.
3
1
2
4
Double-sided tape
Double-sided tape
Double-sided tape
Double-sided tape
Transverse
length
Longitudinal
length
Transverse
length
Longitudinal
length
Transverse
length
Longitudinal
length
Transverse
length
Longitudinal
length
PN-Y425
5mm 23mm 5mm 130mm 5mm 60mm 5mm 281mm
PN-Y475 6mm 14mm 6mm 106mm 6mm 100mm 6mm 300mm
PN-Y555 5mm 20m 5mm 50mm 5mm 120mm 5mm 320mm
PN-Y325/PN/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY (PN-Y425/Y475/Y555) 7 - 15
7.SPEAKER
1) Remove the rear cover.
2) Remove connectors at two sections and four screws. Then remove the speaker.
PN-Y325/PN/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY (PN-Y425/Y475/Y555) 7 - 16
8.LCD MODULE
1) Remove the rear cover.
2) Remove all the connectors.
3) Remove the Main PWB + Angle.
4) Remove the Power PWB + Angle.
5) Remove the speaker.
6) Remove the bezel.
7) Remove the LED/IR PWB.
8) Remove the speed relay PWB + Angle.
[PN-Y425] [PN-Y475Y555]
9) Remove the screw(x10) and stand angle.
: ‘14/September
Click on the first or last page to see other PN-Y475 service manuals if exist.