Sharp PN-Y475 Service Manual ▷ View online
PN-Y325/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY 6 - 10
<Caution for attachment of LED/IR cable>
- A new double-sided tape must be adhered to the LED/IR cable after removal.
- Refer to the illustration below and adhere the tape.
1
2
Double-sided tape ①
Double-sided tape ②
Transverse
length
Longitudinal
length
Transverse length
Longitudinal
length
PN-Y325 5mm
70mm
5mm 300mm
PN-Y325/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY 6 - 11
6.SPEAKER
1) Remove the rear cover.
2) Remove connectors at two sections (as shown in 5 and 6 in the below illustration) and four screws (as shown in 1, 2, 3, and 4 in the
below illustration). Then remove the speaker.
PN-Y325/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY 6 - 12
7.LCD MODULE
1) Remove the rear cover.
2) Remove all the connectors.
3) Remove the Main PWB + Angle.
4) Remove the Power PWB + Angle.
5) Remove the speaker.
6) Remove the bezel.
7) Remove the LED/IR PWB.
PN-Y325/Y425/Y475/Y555 DISASSEMBLY AND ASSEMBLY 6 - 13
8) Only LCD module remains after removing screws, cramps, and each angle.
<MEMO>
There is an engraved mark of arrow on the plate. Remove this section with the engraved mark.
: ‘14/September
Click on the first or last page to see other PN-Y475 service manuals if exist.