DOWNLOAD Sharp PN-V602 (serv.man9) Service Manual ↓ Size: 10.44 MB | Pages: 60 in PDF or view online for FREE

8

E

•  This product is for use indoors.

•  A mounting bracket compliant with VESA specifications is

required.

•  Since the monitor is heavy, consult your dealer before

installing, removing or moving the monitor.

•  Mounting the monitor on the wall requires special expertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this 

work yourself. Our company will bear no responsibility 

for accidents or injuries caused by improper mounting or

mishandling.

•  Use the monitor perpendicular to a level surface. If

necessary, the monitor may be tilted up to 20 degrees

upward or downward.

•  When mounting the monitor horizontally, the optional fan

cover (PN-ZR31) is required. For details along with the

horizontal mounting conditions, consult your dealer.

•  This monitor should be used at an ambient temperature

between 32°F (0°C) and 104°F (40°C).

•  Be careful of high temperatures in the surrounding area. 

When installing the monitor inside a housing, or if the

ambient temperature may be outside of the range of 32ºF

(0ºC) to 104ºF (40ºC), install a fan or take other measures

to keep the ambient temperature within the required range.

•  Temperature condition may change when using the monitor

together with the optional equipments recommended by

SHARP. In such cases, please check the temperature 

condition specified by the optional equipments.

•  Do not block any ventilation openings. If the temperature

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.

•  Adhere to the following when installing the monitor in its

portrait orientation. Failing to adhere to the following may

cause malfunctions. 

- To install in landscape orientation, rotate the monitor 90

degrees to the right.

- Set the MONITOR on the SETUP menu to PORTRAIT.

(See page 24.)

- Be sure to secure the power cord (supplied) to the cable

clamp attachment with the supplied cable clamp.  

Make sure that the power cord (supplied) does not supply

power to the terminal when being secured and do not 

over bend the power cord (supplied).

Cable clamp

Power cord (Supplied)

Cable clamp

attachment

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.  

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. 

Install by the most suitable method for the material and the structure.

•  To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than

the thickness of the mounting bracket.

•  When moving the monitor, be sure to hold it with either both handles or the 4 corners on the bottom of the unit. Do not hold

the LCD panel. This may cause product damage, failure, or injury.

•  When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor

frame.

•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

•  Do not use any screw holes other than VESA holes for installation.

9

E

If any component should be missing, please contact your dealer.


 Liquid Crystal Display Monitor: 1



 Cable clamp: 2



 Power cord: 1



 CD-ROM (Utility Disk for Windows): 1



 Setup manual: 1



 Protection cover: 4



 Handle screw (short): 4



 Bezel sheet (long/short): 2 each



 Bezel sheet attachment instructions: 1

*  Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*  For environmental protection!

 Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Multiple monitor connection .......................................13

Installing the batteries ................................................15
Remote control operation range .................................15

Turning on the main power.........................................17
Turning power on/off ..................................................17
Disabling power on/off operations ..............................17

Displaying the menu screen .......................................22
Menu item details .......................................................23
Adjustments for PC screen display ............................30

PC connection ............................................................32
Communication conditions .........................................32
Communication procedure .........................................32
Setting of the GAMMA user data ................................36
RS-232C command table ...........................................37

Settings to connect to a LAN ......................................45
Controlling with a PC ..................................................47

10

E

n

n

Additional input/output terminals are available by attaching 

the PN-ZB02 interface expansion board (optional).

This section is used to connect optional hardware for 

function expansion. Offering this attachment location 

is not a guarantee that future compatible hardware 

attachments will be released.

This terminal is provided for possible future (optional)

function expansion. Offering of this terminal is not a 

guarantee that future expanded functionality will be 

provided.

Caution

•  Consult your SHARP dealer for attachment/detachment of

optional parts.

•  Do not block the fan cover.

•  Do not open the expansion terminal cover by yourself. 

There are high voltage parts inside the cover which may 

cause an electric shock.

11

E

n

 

 

 

 

 

 

 

 

 

 

 

 

n