STR-DN1000 (serv.man2) — Sony Audio Service Manual (repair manual)

Model
STR-DN1000 (serv.man2)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
50.42 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
str-dn1000-sm2.pdf
Date

View Sony STR-DN1000 (serv.man2) Service Manual online

SERVICE MANUAL
SUPPLEMENT-1
STR-DN1000
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Ver. 1.2  2009.11
9-889-530-81
Subject: VIDEO CALIBRATION ADJUSTMENT
File this supplement with the service manual.
STR-DN1000
2
VIDEO  CALIBRATION  ADJUSTMENT
Adjustment to decide the standard of the video input signal.
Note: After replacing DIGITAL VIDEO board, perform this adjustment.
1. Adjustment jig
The color pattern generator that can output 100% in NTSC/PAL/
HD color bar signal to the component and the composite at the 
same time is necessary for the adjustment.
When there is no color pattern generator, it is possible to substitute 
it by the Blu-ray Disc player that can output the component termi-
nal and the video terminal at the same time (Substitution model 
name example: BDP-S350).
However, please do the following signal output confi rmation with 
the oscilloscope beforehand when substituting it with the Blu-ray 
Disc player.
1-1. Component signal
Checking Component Video Output Y
Signal
DVD standard disc color bars (100%)
Check point
COMPONENT VIDEO OUT (Y)
terminal (75 
Ω terminated)
Specifi cation
1.00 ± 0.03 Vp-p
1.00 
r 0.03 Vp-p
Checking Component Video Output B-Y
Signal
DVD standard disc color bars (100%)
Check point
COMPONENT VIDEO OUT (P
B
/C
B
)
terminal (75 
Ω terminated)
Specifi cation
0.70 ± 0.03 Vp-p
0.70 
r 0.03 Vp-p
Checking Component Video Output R-Y
Signal
DVD standard disc color bars (100%)
Check point
COMPONENT VIDEO OUT (P
R
/C
R
)
terminal (75 
Ω terminated)
Specifi cation
0.70 ± 0.03 Vp-p
0.70 
r 0.03 Vp-p 
1-2. Composite signal
Video level confi rmation
Signal
DVD standard disc color bars (100%)
Check point
LINE OUT (VIDEO) terminal
(75 
Ω terminated)
Specifi cation
1.00 ± 0.03 Vp-p
1.00 
r 0.03 Vp-p
2.  Video calibration adjustment
2-1. Connection
color pattern
generator
or
Blu-ray 
Disc player
set
VIDEO board
MONITOR VIDEO OUT jack (J6004)
TV
monitor
VIDEO board
COMPONENT VIDEO IN 2 jack (J6001)
BD VIDEO IN jack (J6005)
2-2.  Procedure for color pattern generator
1.  It connects of step 2-1, and the turn on the main power.
2.  “DVD” is selected by using [INPUT SELECTOR] button.
3.  Input NTSC color bars signal from the color pattern generator.
4.  Press the [
?/1
] button to turn off the main power.
5.  While pressing the [DISPLAY] and [MOVIE] buttons, press 
the [
?/1
] button to turn on the main power. When correctly en-
tering the test mode “V.CAL COMPLETE N:P:H” is displayed 
(keeps pressing two buttons until the message appears).
6.  The NTSC signal adjustment is begun when press the cross 
(center of cursor) button of remote commander, and the dis-
play changes from “NTSC:MW -----” to “NTSC:MW OK C S 
V E” little by little. Finally, the display returns to the display of 
“V.CAL COMPLETE N:P:H”.
7.  Input PAL color bars signal from the color pattern generator.
8.  Perform step 6 to 7 for the PAL signal adjustment.
9.  Input HD color bars signal (720p or 1080i) from the color pat-
tern generator.
10. Perform step 6 to 7 for the HD signal adjustment.
11.  The turn off the main power.
STR-DN1000
3
2-3.  Procedure for Blu-ray Disc player
1.  It connects of step 2-1, and the turn on the main power of set 
and Blu-ray Disc player.
2.  “DVD” is selected by using [INPUT SELECTOR] button.
3.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 
DVD test disc “HLX-504 (Part No. J-6090-088-A)” or “HLX-
513 (Part No. J-2501-305-A)” is insert. The disc playback au-
tomatically becomes start “Main Menu” is display.
4.  “1.Color Bar 100%” of “1.Video Signal” is reproduced, and 
100% in the color bar is displayed in the TV monitor, playing 
the Blu-ray Disc player is pause playback.
5.  Press the [
?/1
] button to turn off the main power of the set.
6.  While pressing the [DISPLAY] and [MOVIE] buttons, press 
the [
?/1
] button to turn on the main power of the set. When 
correctly entering the test mode “V.CAL COMPLETE N:P:H” 
is displayed (keeps pressing two buttons until the message ap-
pears).
7.  The NTSC signal adjustment is begun when press the cross 
(center of cursor) button of remote commander, and the dis-
play changes from “NTSC:MW -----” to “NTSC:MW OK C S 
V E” little by little. Finally, the display returns to the display of 
“V.CAL COMPLETE N:P:H”.
8.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 
change to DVD test disc “HLX-506 (Part No. J-6090-077-A)” 
or “HLX-507 (Part No. J-6090-078-A)”. The disc playback au-
tomatically becomes start “Main Menu” is display.
9.  “1.Color Bar 100%” of “1.Video Signal” is reproduced, and 
100% in the color bar is displayed in the TV monitor, playing 
the Blu-ray Disc player is pause playback.
10.  The PAL signal adjustment is begun when press the cross (cen-
ter of cursor) button of remote commander. Finally, the display 
returns to the display of “V.CAL COMPLETE N:P:H”.
11.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 
change to DVD test disc “HLX-104 (Part No. J-6090-199-A)”. 
The disc playback automatically becomes start “Main Menu” 
is display.
12. “59.94Hz, 1080i” 
→ “1.Video Signal” → “1.Color Bar 100%” 
is selected, and 100% in the color bar is displayed in the TV 
monitor, playing the Blu-ray Disc player is pause playback.
13. The video output of the Blu-ray Disc player is switched 1080i 
(The output from the component terminal of the Blu-ray Disc 
player becomes 1080i output).
14. The HD signal adjustment is begun when press the cross (cen-
ter of cursor) button of remote commander. Finally, the display 
returns to the display of “V.CAL COMPLETE N:P:H”.
15. The turn off the main power.
STR-DN1000
REVISION  HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.06
New
1.1
2009.08
Change of TEST MODE contents
Change of DISPLAY, HEADPHONE, POWER KEY, STANDBY DCDC and VIDEO boards (Suffi x-13)
 
(SMR-09039)
1.2
2009.11
Change of Ref. No. for F902 on AC SELECT board
Addition of Parts No. for Ref. No. C301 and TP300 on HEADPHONE board
Change of Part No. for Ref. No. J300 on HEADPHONE board
Addition of CONVERSION ADAPTOR (Chilean and Peruvian models)
Change of Part No. for REMOTE COMMANDER
Addition of VIDEO CALIBRATION ADJUSTMENT (Supplement-1) 
(SMR-09072)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page of 4
Display

Download Sony STR-DN1000 (serv.man2) Service Manual (Repair Manual)

Here you can view online or download Sony STR-DN1000 (serv.man2) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sony STR-DN1000 (serv.man2) Audio. Information contained in Sony STR-DN1000 (serv.man2) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).