Sharp PN-L703B (serv.man3) Service Manual ▷ View online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 4
2. SPECIFICATIONS
2 – 1.PRODUCT SPECIFICATIONS
Model PN-L703A/70TA3
PN-L703B・70TB3
PN-L603A/60TA3 PN-L603B/60TB3
LCD component
70" Class [69-1/2 inch (176.6cm)
diagonal] TFT LCD
60" Class [60-1/16 inch (152.5cm)
diagonal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.802 mm (H) × 0.802 mm (V)
0.692 mm (H) × 0.692 mm (V)
Viewing angle
160° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
60-9/16 (W) x 34-1/16 (H) (1538.9 x 865.6)
52-5/16 (W) x 29-7/16 (H) (1329.1 x 747.6)
Computer input signal
Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*1,
Composite sync (TTL: positive/negative)*1
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS
Input terminals
PC/AV
HDMI x 3
PC
Mini D-sub 15 pin, 3 rows x 2, DisplayPort x 1
Audio
3.5 mm mini stereo jack x 2
Output terminals
Video/Audio
DisplayPort x 1
Audio
3.5 mm mini stereo jack x 1
LAN terminal
10 BASE-T/100 BASE-TX
Speaker output (internal/external)
10 W + 10 W/10 W + 10 W 6 Ω
Touch Panel
Detection
method
Infrared blocking detection method
PC connector
USB (2.0 compliant) (Type B) x 2
Touch pen
Wireless communication
method (2.4 GHz, IEEE
802.15.4 compliant,
DS-SS method)
-
Wireless communication
method (2.4 GHz, IEEE
802.15.4 compliant,
DS-SS method)
-
Touch
pen
adapter port
USB (2.0 compliant) (Type A)
WHITEBOARD
mode
LAN terminal
10 BASE-T/100
BASE-TX/1000 BASE-T
-
10 BASE-T/100
BASE-TX/1000 BASE-T
-
USB port
USB (2.0 compliant) (Type
A) x 4
-
USB (2.0 compliant) (Type
A) x 4
-
Power requirement
AC 100 V - 240 V, 3.0 A,
50/60 Hz
AC 100 V - 240 V, 2.6
A, 50/60 Hz
AC 100 V - 240 V, 2.5 A,
50/60 Hz
AC 100 V - 240 V, 2.2 A,
50/60 Hz
Operating temperature *2*3
41°F to 95°F (5°C to 35°C)
Operating humidity*3
20% to 80% (no condensation)
Power consumption
(Maximum / input signal waiting mode
*4 / whiteboard standby mode /
standby mode *5)
250 W / 35 W / 9 W / 3.5
W
225 W / 14 W / 3.5 W
210 W / 35 W / 9 W / 3.5
W
185W / 14 W / 3.5 W
Dimensions (excluding protrusions)
inch(mm)
Approx. 64-13/16 (W) x 3-11/16 (D)
x 39-3/4 (H) (1647 x 94 x 1010)
Approx. 56-9/16 (W) x 3-11/16 (D)
x 35-1/16 (H) (1437 x 94 x 890)
Weight lbs. (kg)
Approx. 134.5 (61)
Approx. 130.1 (59)
Approx. 105.9 (48)
Approx. 101.5 (46)
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 5
*1 D-sub input terminal only.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are
satisfied.
*4 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.
*5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
1 – 2.DIMENSIONAL DRAWINGS (THE VALUES SHOWN ARE APPROXIMATE VALUES)
PN-L703A/L703B, PN-70TA3/70TB3
PN-L603A/L603B, PN-60TA3/60TB3
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in
serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch
(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times
or more the weight of the monitor.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 6
2 – 3.COMPATIBLE SIGNAL TIMING (PC)
Screen resolution
Hsync
Vsync
Dot
frequency
Digital
Analog
(D-SUB)
Display
Port
HDMI
VESA
640×480
31.5khz
60Hz 25.175MHz
Yes
Yes
Yes
37.9kHz
72Hz 31.5MHz Yes Yes
Yes
37.5kHz
75Hz 31.5MHz Yes Yes
Yes
800×600
35.1kHz
56Hz 36.0MHz -
-
Yes
37.9kHz
60Hz 40.0MHz Yes Yes
Yes
48.1kHz
72Hz 50.0MHz Yes Yes
Yes
46.9kHz
75Hz 49.5MHz Yes Yes
Yes
848×480 31.0kHz
60Hz 33.75MHz
-
-
Yes
1024×768
48.4kHz
60Hz 65.0MHz Yes Yes
Yes
56.5kHz
70Hz 75.0MHz Yes Yes
Yes
60.0kHz
75Hz 78.75MHz
Yes
Yes
Yes
1152×864 67.5kHz
75Hz 108.0MHz
Yes
Yes
Yes
1280×768
47.8kHz 60Hz 79.5MHz Yes
-
Yes
60.3kHz
75Hz 102.25MHz
Yes
-
Yes
1280×800
49.7kHz 60Hz 83.5MHz Yes
Yes
1280×960
60.0kHz 60Hz 108.0MHz
Yes Yes Yes
1280×1024
64.0kHz 60Hz 108.0MHz
Yes Yes Yes
80.0kHz 75Hz 135.0MHz
Yes Yes Yes
1360x768
47.7kHz 60Hz 85.5MHz Yes Yes Yes
1400×1050 65.3kHz 60Hz 121.75MHz
Yes
Yes
Yes
1440×900 55.9kHz 60Hz 106.5MHz
Yes Yes
Yes
1600×1200*
75.0kHz 60Hz 162.0MHz
Yes Yes Yes
1680×1050 65.3kHz 60Hz 146.25MHz
Yes
Yes
Yes
1920×1200*
74.0kHz
60Hz 154.0MHz
Yes
Yes
Yes
Wide
1280×720 44.7kHz 60Hz 74.4MHz Yes Yes Yes
1920×1080
67.5kHz
60Hz 148.5MHz
Yes
Yes
Yes
US TEXT
720×400 31.5kHz 70Hz 28.3MHz Yes Yes Yes
Sun
1024×768
48.3kHz 60Hz 64.13MHz
-
-
Yes
53.6kHz 66Hz 70.4MHz -
-
Yes
56.6kHz 70Hz 74.25MHz
-
-
Yes
1152×900
61.8kHz 66Hz 94.88MHz
-
-
Yes
71.8kHz 76.2Hz
108.23MHz
-
-
Yes
1280×1024
71.7kHz 67.2Hz
117.01MHz
-
-
Yes
81.1kHz 76Hz
134.99MHz
-
-
Yes
1600×1000 68.6kHz
66Hz
135.76MHz
-
-
Yes
* Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
* The frequency values for the Sun are reference values.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 7
2 – 4. COMPATIBLE SIGNAL TIMING (AV)
Screen resolution
Frequency
HDMI
Component
1920 × 1080p
24Hz
Yes -
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
1920 × 1080i
50Hz
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
1280 × 720p
50HZ
Yes
Yes
59.94Hz
Yes
Yes
60Hz
Yes
Yes
720 × 576p
50Hz
Yes
Yes
720 × 480p
59.94Hz
Yes
Yes
60Hz
Yes
Yes
640 × 480p(VGA)
59.94Hz
Yes
-
60Hz
Yes
-
720(1440) × 576i
50Hz
Yes
Yes
720(1440) × 480i
59.94Hz
Yes
Yes
60Hz
Yes
Yes
2 – 5.POWER MANAGEMENT
This monitor conforms to VESA DPMS. Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
DPMS:Display Power Management Signaling
DPMS
Screen
Power consumption
*1
Hsync
Vsync
ON STATE
Display
250 W
210 W
Yes Yes
STANDBY
No
display
35 W
*2
35 W
*2
No Yes
SUSPEND Yes
No
OFF STATE
No
No
*1 Upper value: PN-L703A, Lower value: PN-L603A.
*2 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF
.
2 – 6.DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
Click on the first or last page to see other PN-L703B (serv.man3) service manuals if exist.