Sharp PN-L703B (serv.man3) Service Manual ▷ View online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 3
■
Connection with a PC or AV equipment
Signal type
Name
Contents
Video input/output
HDMI 1 input terminal
- Use a commercially available HDMI cable (conforming to the
HDMI standard).
- Set HDMI1/HDMI2/HDMI3 of INPUT SELECT on the SETUP
menu according to the device to be connected.
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
When HDMI is selected, connection to the audio input terminal is
unnecessary.
HDMI 2 input terminal
HDMI 3 input terminal
DisplayPort input terminal
HDMI 3 input terminal
DisplayPort input terminal
- Use a commercially available DisplayPort cable (conforming to
the DisplayPort standard).
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
When DisplayPort is selected, connection to the audio input
terminal is unnecessary.
When DisplayPort is selected, connection to the audio input
terminal is unnecessary.
D-sub 1 input terminal
- Set D-SUB1 of INPUT SELECT on the SETUP menu according
to the device to be connected.
- To use with D-SUB1[VIDEO], connect the green terminal to the
device’s video output.
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
D-sub 2 input terminal
- Select the audio input terminal to be used in AUDIO SELECT of
the SETUP menu.
Audio input/output
Audio 1 input terminal
- Use an audio cable without resistance.
- Set the audio input terminal to be used in each input mode in
- Set the audio input terminal to be used in each input mode in
AUDIO SELECT on the SETUP menu.
Audio 2 input terminal
DisplayPort output terminal
- The screen displayed on the monitor and the audio output from
the monitor can be output to an external device.
- Use a commercially available DisplayPort cable (conforming to
the DisplayPort standard).
- Outputting HDCP-encrypted video requires an external device
which supports HDCP.
Audio output terminal
- The output sound varies depending on the input mode.
- The volume of the output sound can be fixed by setting AUDIO
- The volume of the output sound can be fixed by setting AUDIO
OUTPUT of AUDIO OPTION on the SETUP menu.
- It is not possible to control the sound output from the audio output
terminals with the AUDIO menu.
External speaker terminals
- To use external speakers, set SPEAKER SELECT to EXTERNAL
in AUDIO OPTION on the SETUP menu.
- Be sure to use external speakers with an impedance of 6 Ω or
greater and a rated input of at least 10 W.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 4
Signal type
Name
Contents
Other
Touch pen adapter port
- Connect the touch pen adapter in order to use the touch pen.
USB 1 (type B) port
- To use the touch panel with the computer connected to the
bottom, connect the touch panel to the computer with the USB
cable. (Factory setting. Can be changed in TOUCH INPUT
SELECT on the SETUP menu.)
cable. (Factory setting. Can be changed in TOUCH INPUT
SELECT on the SETUP menu.)
USB 2 (type B) port
- To use the touch panel with the computer connected to the side,
connect to the computer with the USB cable. (Factory setting.
Can be changed in TOUCH INPUT SELECT in the SETUP
menu.)
Can be changed in TOUCH INPUT SELECT in the SETUP
menu.)
LAN terminal
- You can control the monitor from a computer on a network by
connecting a commercially available LAN cable between this
terminal and a network.
terminal and a network.
WHITEBOARD mode
terminals
terminals
USB ports
- Connect USB devices that you will use with the WHITEBOARD
(USB flash drive, USB keyboard, USB mouse).
- Removing a USB flash drive.
(1) Touch [Eject USB Media] ( ).
(2) Touch the USB flash drive that you want to remove.
(3) Touch [Stop].
(4) When “You can eject the USB device.” appears, remove the
(3) Touch [Stop].
(4) When “You can eject the USB device.” appears, remove the
USB flash drive.
(5) Touch [Close].
LAN terminal
- A commercially available LAN cable can be used to connect the
WHITEBOARD to the network while in use.
■
Controlling the monitor with a PC (LAN)
1. LAN cable (commercially available, crossover) is directly connected to the PC
Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN.
You can also configure the monitor to send e-mail notification when it has a problem.
The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 5
2. LAN cable (commercially available, straight) is directly connected to the PC
Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN.
You can also configure the monitor to send e-mail notification when it has a problem.
The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).
(MEMO)
- You must assign an IP address to the monitor by following the procedures in
“Settings to connect to a LAN”. (See the description on the
right.)
- Your PC must be installed with Internet Explorer (version 7.0 or later).
Version 7, 8, or 9 of Internet Explorer is recommended.
Use Internet Explorer Version 10 in compatibility mode.
- When STANDBY MODE is set to LOW POWER, control is not possible in standby mode.
1 – 4.CONNECTING THE POWER CORD
(Caution)
- Use only the power cord supplied with the monitor.
1 ) Turn off the main power switch.
2 ) Plug the power cord (supplied) into the AC input terminal.
3 ) Plug the power cord (supplied) into the AC power outlet.
1 – 5. BINDING CABLES
The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 6
1 – 6. REMOVING THE HANDLES
The handles can be removed.
(CAUTION)
- The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.
- To attach handles, be sure to use the handles and handle screws which were removed from the monitor.
- Be sure the handles are attached securely.
1 – 7. MOUNTING A WEB CAMERA
It is possible to mount a commercially available web camera in the following positions:
1 – 8. ATTACHING THE TRAY
Secure the tray using 5 tray mounting screws (M3) (supplied).
Click on the first or last page to see other PN-L703B (serv.man3) service manuals if exist.