DOWNLOAD Sharp PN-K321 (serv.man6) Service Manual ↓ Size: 3.33 MB | Pages: 33 in PDF or view online for FREE

29

E

n

Note that the values shown are approximate values.

• Landscape

3-15/16

[100]

3-15/16

[100]

Opening height (15-9/16 [395]

)

*

Opening width (27-9/16 [700])

*Adjustable (19-17/64~24-31/32 [489~634])

29-17/32 [750]

10-3/32 [256]

15-23/32 [399]

Unit: inch [mm]

3-15/16 [100]

3-15/16 [100]

17-3/8 [441]

1-25/64

[35]

• Portrait

31-1/32 [788]

29-17/32 [750]

17-3/8 [441]

Unit: inch [mm]

  When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. 

SHARP recommends using M6 screws and tighten the screws. 

Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in 

serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch  

(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times 

or more the weight of the monitor.

30

E

n

VESA

Wide

US TEXT

640×480

800×600

848×480

1024×768

1152×864

1280×768

1280×800
1280×960

1280×1024

1360×768

1400×1050
1600×1200
1680×1050
1920×1200
3840×2160

1280×720

1920×1080

720×400

60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
24Hz
25Hz
30Hz
50Hz
60Hz
60Hz
60Hz
70Hz

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

    Yes

*2*3

    Yes

*2*3

Yes
Yes
Yes

*1  Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed. 

*2  Displays using multi-streaming.

*3  The signals for the left and right screens are both 1920 x 2160 signals.

*  All are compliant only with non-interlaced.

*  Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.

n

This monitor conforms to VESA DisplayPort power management.

n

The monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters 

is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect 

plug-and-play monitors.

There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

31

E

n

1 MainLane 3-

11 Gnd

2 Gnd

12 MainLane 0+

3 MainLane 3+

13 Gnd

4 MainLane 2-

14 Gnd

5 Gnd

15 Aux+

6 MainLane 2+

16 Gnd

7 MainLane 1-

17 Aux-

8 Gnd

18 Hot-plug detection

9 MainLane 1+

19 Gnd

10 MainLane 0-

20 3.3 V

32

E

•  When installing, removing or moving the monitor, ensure 

that this is carried out by at least 2 people.

•  Be sure to use a wall-mount bracket designed or 

designated for mounting the monitor.

•  This monitor is designed to be installed on a concrete wall 

or pillar. Reinforced work might be necessary for some 
materials such as plaster / thin plastic board / wood before 
starting installation. 
This monitor and bracket must be installed on a wall which 
can endure at least 4 times or more the weight of the 
monitor. Install by the most suitable method for the material 
and the structure.

•  To attach a VESA-compliant mounting bracket, use M6 

screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) 
longer than the thickness of the mounting bracket.

•  Do not use an impact driver.
•  When moving the monitor, be sure to hold it with the unit 

bottom and the side of unit. Do not hold the LCD panel or 
corners. This may cause product damage, failure, or injury.

•  Do not use any screw holes other than VESA holes for 

installation.

n

Caution

•  The attachment plate is only for use with the monitor.  

Do not use with any other devices.

 

n

Caution

•  To reduce the risk of injury and damage caused by the 

product toppling or falling in an earthquake or similar 

situation, take measures to prevent toppling and falling.

•  If the wall or platform on which the monitor is installed is 

not sufficiently strong, the effectiveness of the toppling/

falling prevention measures will be severely compromised. 

Reinforce the wall or platform as needed. 

The toppling/falling prevention measures are intended to 

reduce the risk of injury and damage in an earthquake, 

however, the effectiveness of the measures is not 

guaranteed in all earthquakes.

•  Before implementing the toppling prevention measures, 

complete all connections.

Verify that the eye bolt is attached firmly and does not come 

out.

Commercially available eye bolt

(bolt shaped to allow attachment of 

a string or cord)

Commercially 

available cord