DOWNLOAD Sharp PN-G655RE (serv.man5) Service Manual ↓ Size: 12.91 MB | Pages: 127 in PDF or view online for FREE

ENGLISH

E

19



OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
LANGUAGE
Sets the display language for the menu screen.
ID No. SET
Assigns ID numbers to monitors connected in a daisy chain 

(see page 25), using RS-232 cables.

The numbers 1 to 255 are available for ID numbers.

If “0” is set, the system regards this as the state where no ID 

number is set.
PICTURE FLIP
A picture flips to appear.

STANDARD

MIRROR

ROTATE

UPSIDE DOWN

ABC

ABC

ABC

ABC

POWER ON DELAY
You can delay the screen display after the monitor is turned 

on. The period can be set up to 60 seconds in units of one 

second. When this function is activated, the power LED 

flashes (at approx. 1 second interval) in orange. This function 

is disabled when 0 is specified.



DATE/TIME SETTING
Set the date and time. Press 

 or 

 to select the date 

and time, and press 

 or 

 to change the numerical 

values.
Set the date in “Year/Month/Day” order.
Set the time on a 24-hour basis.
SCHEDULE (See page 21.)
You can set the time to switch the monitor on and off.
DVI SELECT
Selects equipment that is to be connected to the PC1/AV1 

input terminal.
BNC SELECT
Selects equipment that is to be connected to the PC3/AV2 

input terminals.
QUICK SHOOT
Reduces the visual lag inherent in fast-motion scenes.
COLOR SYSTEM
Select the colour system of the AV equipment which is 

connected to AV3 input terminal. (AUTO / PAL / PAL-60 / 

SECAM / NTSC3.58 / NTSC4.43) 

When AUTO is selected, the colour system is automatically 

set according to the input signal.
AUDIO OUTPUT
Sets the volume of sound output from the PC/AV audio 

output terminals.

VARIABLE .......... You can adjust the volume using VOLUME.

FIXED .................Fixes the sounds.
480LINES (PC2/PC3)
If a computer connected to the PC2/PC3 input terminal has 

a resolution of 640 x 480 or 848 x 480, make a selection 

according to the resolution.
768LINES (PC2/PC3)
If a computer connected to the PC2/PC3 input terminal has a 

resolution of 1024 x 768, 1280 x 768 or 1360 x 768, make a 

selection according to the resolution.
SELF ADJUST
On a PC2/PC3 screen with a resolution of 800 x 600 or 

higher, specify whether to perform screen adjustment 

automatically or not. When ON is selected, the screen is 

automatically adjusted when the timing of input signals 

varies. “ADJUSTING” appears on the screen during the 

adjustment.
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to 

switch modes from no signal to the input signal standby 

mode when the PC screen is displayed.

E

20

TIPS

•  When WHITE BALANCE is set to THRU, BLACK LEVEL, 

CONTRAST and GAMMA cannot be set.

•  If COLOR MODE is set to sRGB or VIVID, the following 

items cannot be set. 

WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COPY 

TO USER, and GAMMA



You can display the screens of the PC input signal and AV 

input signal simultaneously.

Set this function with “PIP MODES” in the PIP/PbyP menu.

Main screen

Sub 

screen

A sub screen is displayed 

inside a main screen.

Main 

screen

Sub 

screen

A main screen and a sub 

screen are displayed in a line.

Main screen

Sub 

screen

Displays a main screen which 

measures 1280 pixels in the 

longest direction and a sub 

screen in a line.

*  The currently selected input signal is displayed on the main 

screen.

*  You cannot simultaneously display the screens of signals 

of the same type, such as two types of PC input signals or 

two types of AV input signals. 

TIPS

•  You might infringe on a copyright of the author which is 

protected by copyright law when you display the images of 

the computer screen and television/VCR simultaneously for 

profit-making or to show the image to the public.

•  The screen size for dual-screen display is the same as the 

screen size for single-screen display. The DotbyDot screen 

is displayed in NORMAL size except when it is set as the 

PIP main screen.

•  When dual-screen display is selected, the screen cannot 

be enlarged.

•  When dual-screen display is selected, the following 

adjustments of ADVANCED are invalid and adjusting is 

disabled. 

3D-NR, MPEG-NR and 3D-Y/C



ENLARGE MODE
Sets the number of screen splits used for the enlargement. 

(See page 21.)
ENLARGE POS
Specify the split screen to be displayed when the 

enlargement function is used. (See page 21.)
BEZEL H / BEZEL V
Sets the frame width of the display when the enlargement 

function is used. 
H-POS
Adjust the horizontal position of the enlarged screen.
V-POS
Adjust the vertical position of the enlarged screen.



PIP MODES
Sets the display method.

OFF .........Displays one screen.

PIP ...........Displays a sub screen inside a main screen.

PbyP ........Displays a main screen and a sub screen in a line.

PbyP2 ......Displays a main screen which measures 1280 

pixels in the longest direction and a sub screen in 

a line.

PIP SIZE
Sets the size of the sub screen in PIP mode.
PIP H-POS
Adjusts the horizontal position of the sub screen in PIP 

mode.
PIP V-POS
Adjusts the vertical position of the sub screen in PIP mode.
PIP BLEND
In PIP mode, use this menu item to display the sub screen 

transparently.
PIP SOURCE
Selects the input signal of the sub screen in PIP, PbyP, or 

PbyP2 mode.
SOUND CHANGE
Sets the sound which is output in PIP, PbyP, or PbyP2 mode.

If the main screen is displayed as a full screen by the AUTO 

OFF function, the sound for the main screen is output even 

when the sound for the sub screen is specified. 

 

MAIN POS
Sets the position of the main screen in PbyP or PbyP2 mode.
PbyP2 POS
Sets the position of the sub screen in PbyP2 mode. 
AUTO OFF
Sets the display method when no signals for the sub screen 

are input in PIP, PbyP, or PbyP2 mode.

MANUAL .......  Displays a main screen and a black sub 

screen.

AUTO ............ Displays the main screen as a full screen.

ENGLISH

E

21



You can align 4, 9, 16, or 25 monitors and integrate them into 

a single large screen to display.

Enlarged views of separated images are displayed in each 

monitor.

1

3

0

2

0

1

2

4

5

6

8

9

10

3

7

11

12

13

14

15

0

1

2

5

6

7

10

11

12

3

8

13

15

16

17

18

20

21

22

23

4

9

14

19

24

0

1

2

3

4

5

6

7

8

Original 

image

4 monitors

9 monitors

25 monitors

16 monitors

TIPS

•  AV input signals cannot be used for the Enlarge function.

•  To integrate 9 or more monitors using PC1 signals, a 

splitter for the video signal (commercially available) is 

required.

•  When connected in PC2/PC3, a splitter for the video signal 

(commercially available) is required.



You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See 

page 19.)

SCHEDULE

No.

POWER

DAY OF THE WEEK

TIME

INPUT

XXXX/XX/XX XXX  XX:XX:XX 

(2)

OK…[MENU]

1 0 2 4 x 7 6 8

V: 60 Hz    H: 48.4 kHz

(1)

(3)

(4)

(5)

2.  Set the SCHEDULE. (See the description below.)

Press 

 or 

 to select items, and press 

 or 

 to 

change the setting.

MENU

SCHEDULE becomes effective.

(1)
●: SCHEDULE effective

-: SCHEDULE not effective
(2) POWER
ON  :  Switches the monitor on at the specified time.

OFF :  Switches the monitor off at the specified time and puts 

the monitor in standby mode.

(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week 

every week. Specify the day of the week to execute the 

SCHEDULE. 

Periodic setting such as “Monday through Friday” is also 

possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day 

of the week.

(4) TIME
Specifies the time to execute the SCHEDULE.

Set the time on a 24-hour basis.
(5) INPUT
Specifies the input mode at power-on. When not specifying, 

the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI 

SELECT settings.

Input modes displayed on “PC3/AV2” depend on BNC 

SELECT settings.

E

22



When you use the PC2 input terminal or PC3 input terminals 

to display a PC screen for the first time, or when you change 

the setting of the PC, use the automatic screen adjustment.

adjustment pattern. (See the description below.)

MENU

  The automatic adjustment is complete in several seconds.
5.  Press 

MENU

TIPS

•  If the screen cannot be adjusted properly with one 

automatic adjustment, repeat the automatic adjustment two 

or three times. Try manual adjustment if necessary. 



Before making adjustments in the SCREEN menu or 

PICTURE menu, display an image to brighten the entire 

screen. If you are using a Windows PC, use the adjustment 

pattern on the supplied CD-ROM.

  The adjustment pattern will appear.

  Adjust the screen automatically or manually.

TIPS

•  If the display mode on the computer you are using is 

65,000 colours, the colour levels in the colour pattern may 

appear differently or greyscale may appear to be coloured. 

(This is due to the specifications of the input signal and is 

not a malfunction.)

Caution

•  Do not switch off the main power after setting the 

SCHEDULE.

•  Specify the correct date and time. (See pages 14 and 19.) 

SCHEDULE does not function unless the date and time are 

specified.

•  Check regularly that the set date and time are correct.

TIPS

•  Up to 8 SCHEDULE items can be registered.

•  Setting the SCHEDULE flashes the power LED alternately 

in red and orange in standby mode.

•  A SCHEDULE that has a large number has precedence 

over that of a small number when schedules overlap.



FLESH TONE
Adjust the hue control.
3D-NR
Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may 

cause blurring on an image.
MPEG-NR
Reduce block noise caused by digital compression.
3D-Y/C (AV3)
Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-colour is occurring in fast-motion 

scenes, selecting “OFF” may improve the image quality.