Sharp PN-E471R (serv.man5) User Manual / Operation Manual ▷ View online
5
E
Basic Operation
1
2
3
4
5
6
7
8
1. INPUT (Input mode selection)
The menu is displayed. Press or to select the input
mode, and press to enter.
The menu is displayed. Press or to select the input
mode, and press to enter.
* You can select the input terminal by pressing the input
switch of the monitor.
Input mode
Video
Audio
PC D-SUB
PC D-sub input terminal
Audio input terminal
PC HDMI
PC/AV HDMI input terminal
*1
*2
AV HDMI
PC/AV HDMI input terminal
*1
When the PN-ZB01 (optional) is attached
Input mode
Video
Audio
PC DVI-D
PC/AV DVI-D input terminal
*3
*2
PC HDMI
PC/AV HDMI input terminal
*1
PC D-SUB
PC D-sub input terminal
PC RGB
PC RGB input terminals
*4
AV DVI-D
PC/AV DVI-D input terminal
*3
AV HDMI
PC/AV HDMI input terminal
*1
AV COMPONENT AV COMPONENT input terminals
*4
AV S-VIDEO
AV S-video input terminal
AV VIDEO
AV video input terminal
*1 Select the terminal to be used in HDMI of INPUT SELECT.
(See page 12.)
*2 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 12.)
*3 Select the terminal to be used in DVI of INPUT SELECT.
(See page 12.)
*4 Select the terminal to be used in BNC of INPUT SELECT.
(See page 12.)
2. DISPLAY
Displays monitor information. When you press this button
again, the display disappears.
When the PN-ZB01 (optional) is attached, the display changes
from INFORMATION1 → INFORMATION2 → clear display,
and so on every time you press this button.
• The display disappears automatically after about 15
seconds.
•
LAN
is displayed during LAN communication.
• If
LAN
is displayed in red, there is a duplicate IP address.
3. MODE (Color mode selection)
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB → STD...
• sRGB applies to PC input only.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal’s characteristics and represents color tone
close to its original image.
4. SIZE (Screen size selection)
The menu is displayed.
Press or to select the screen size. (See page 6.)
Press or to select the screen size. (See page 6.)
5. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
6. MENU
Displays and turns off the menu screen (see page 7).
7. VOL +/- (Volume adjustment)
Pressing or displays the VOLUME menu when the
Pressing or displays the VOLUME menu when the
menu screen is not displayed.
V O L U M E
15
Press or to adjust the volume of the sound.
* If you do not press any buttons for about 4 seconds, the
VOLUME menu automatically disappears.
8. BRIGHT +/- (Backlight adjustment)
Pressing or displays the BRIGHT menu when the menu
Pressing or displays the BRIGHT menu when the menu
screen is not displayed.
B R I G H T
15
Press or to adjust the brightness.
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
E
6
Basic Operation
n
Switching the screen size
Even when the screen size is changed, the display may remain the same depending on the input signal.
WIDE
PC input
Displays image so it fills the entire screen.
AV input
An image with a 4:3 aspect ratio is stretched to fill the entire
screen.
ZOOM 1
PC input
An image with a 4:3 aspect ratio is enlarged to fill the entire screen
without changing the aspect ratio. The edges of the image may be
cut off.
AV input
ZOOM 2
PC input
Use this size if ZOOM 1 cuts off the subtitles.
AV input
NORMAL
PC input
Displays image so it fills the screen without changing the aspect
ratio of the input signals.
AV input
Displays the entire image of the aspect ratio of 4:3 without
changing the aspect ratio.
Dot by Dot
PC input
Displays the dots of the signals input from the connected PC as
the corresponding dots on the screen. *
AV input
Displays the dots of the input signals as the corresponding dots on
the screen.
*: With a monitor of screen resolution 1600 x 1200 or 1920 x 1200, selecting Dot by Dot displays the NORMAL screen.
TIPS
• Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial
or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright
Law, so please be careful.
• When “Enlarge” is set, the screen size is fixed to “WIDE” mode.
• When dual-screen display is selected, the screen size cannot be changed.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this
monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen
size to “NORMAL”.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.
7
E
Menu Items
Displaying the menu screen
Video and audio adjustment and settings of various functions
are enabled. This section describes how to use the menu
items. See pages 10 to 13 for details of each menu items.
Caution
• Do not turn the main power switch off while the menu items
are being displayed. Doing so may initialize the settings.
n
Example of operation
(Adjusting CONTRAST in the PICTURE menu)
1. Press to display the menu screen.
1. Press to display the menu screen.
1 9 2 0 x 1 0 8 0
V: 60 Hz H: 67.5 kHz
AUTO
CLOCK
PHASE
H-POS
V-POS
H-SIZE
V-SIZE
H-RESOLUTION
V-RESOLUTION
RESET
SCREEN
PICTURE
AUDIO
SETUP
OPTION
ENLARGE
PIP/PbyP
600
25
610
37
50
50
1920
1080
SCREEN
1/1
END···[MENU]
PC D-SUB
2. Press or to select PICTURE, and press .
PICTURE menu is displayed.
3. Press or to select CONTRAST.
AUTO
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
TINT
COLORS
SHARPNESS
78
84
30
30
12
30
30
12
1/2
PICTURE
SCREEN
PICTURE
AUDIO
SETUP
OPTION
ENLARGE
PIP/PbyP
OK···[MENU]
1 9 2 0 x 1 0 8 0
V: 60 Hz H: 67.5 kHz
PC D-SUB
4. Press or to adjust the setting.
AUTO
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
TINT
COLORS
SHARPNESS
88
84
30
30
12
30
30
12
1/2
PICTURE
SCREEN
PICTURE
AUDIO
SETUP
OPTION
ENLARGE
PIP/PbyP
OK···[MENU]
V: 60 Hz H: 67.5 kHz
1 9 2 0 x 1 0 8 0
PC D-SUB
For items that have
, press , make settings and then
press .
5. Press twice to close the menu screen.
TIPS
• The menu will differ depending on the input mode.
• The menu screen will close automatically if no operation is
performed for about 15 seconds. (DATE/TIME SETTING,
SCHEDULE and LAN SETUP screens will close in about 4
minutes.)
n
Menu screen display
AUTO
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
TINT
COLORS
SHARPNESS
78
84
30
30
12
30
30
12
1/2
PICTURE
SCREEN
PICTURE
AUDIO
SETUP
OPTION
ENLARGE
PIP/PbyP
OK···[MENU]
V: 60 Hz H: 67.5 kHz
4
1 9 2 0 x 1 0 8 0
PC D-SUB
1
3
2
1 Name of the menu
2 Input mode
3 An item being selected (highlighted)
4 Screen resolution of input signal, and other data.
TIPS
• Items that cannot be selected appear in gray.
(e.g. Function not supported by the current input signal)
E
8
Menu Items
List of menu items
The displayed menu items vary depending on whether or not the PN-ZB01 (optional) is attached.
○: Item is available, -: Item is not available.
Menu
Item
PN-ZB01 (optional)
Not attached
Attached
SCREEN
AUTO
○
○
CLOCK
○
○
PHASE
○
○
H-POS
○
○
V-POS
○
○
H-SIZE
○
○
V-SIZE
○
○
H-RESOLUTION
○
○
V-RESOLUTION
○
○
RESET
○
○
PICTURE
AUTO
○
○
CONTRAST
○
○
BLACK LEVEL
○
○
TINT
○
○
COLORS
○
○
SHARPNESS
○
○
ADVANCED
FLESH TONE
○
○
3D-NR
○
○
MPEG-NR
○
○
3D-Y/C
-
○
C.M.S.-HUE
○
○
C.M.S.-SATURATION
○
○
C.M.S.-VALUE
○
○
COLOR MODE
○
○
WHITE BALANCE
○
○
PRESET
○
○
R-CONTRAST
○
○
G-CONTRAST
○
○
B-CONTRAST
○
○
COPY TO USER
○
○
GAMMA
○
○
RESET
○
○
AUDIO
TREBLE
○
○
BASS
○
○
BALANCE
○
○
RESET
○
○
SETUP
OSD H-POSITION
○
○
OSD V-POSITION
○
○
MONITOR
○
○
MONAURAL AUDIO
○
○
LANGUAGE
○
○
POWER ON DELAY
○
○
OPERATION MODE
○
○
STANDBY MODE
○
○
OFF IF NO OPERATION
○
○
HDMI SETTING
HDMI AUTO VIEW
○
○
HDMI RGB INPUT RANGE
○
○
HOT PLUG CONTROL HDMI
○
○
DVI
-
○
RS-232C/LAN SELECT
-
○
ID No. SET
○
○
BAUD RATE
○
○
LAN SETUP
-
○
SPEAKER SELECT
-
○
OPTION DC OUT SETTING
○
○
Click on the first or last page to see other PN-E471R (serv.man5) service manuals if exist.