DOWNLOAD Sharp PN-A601 (serv.man5) Service Manual ↓ Size: 8.4 MB | Pages: 60 in PDF or view online for FREE

9

E

If any component should be missing, please contact your dealer.


 Liquid Crystal Display Monitor: 1



 Remote control unit: 1



 Cable clamp: 2



 Power cord: 1



 R-6 battery (“AA” size): 2



 CD-ROM (Utility Disk for Windows): 1



 Setup manual: 1



 Protection cover: 2



 Protection sticker: 2



 Handle screw (short): 4



 Vertical sticker (Operation panel): 1



 Vertical sticker (Logo): 1



  Blank sticker: 1 

Place a blank sticker onto the SHARP logo to cover the 
logo.



 Terminal label: 1

    Use when attaching the PN-ZB01 Expansion Board

(optional).

*  Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*  For environmental protection!

 Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Installing the batteries ................................................15
Remote control operation range .................................15

Turning on the main power.........................................18
Turning power on/off ..................................................18
Disabling power on/off operations ..............................18

Displaying the menu screen .......................................21
Menu item details .......................................................22
Adjustments for PC screen display ............................29

PC connection ............................................................31
Communication conditions .........................................31
Communication procedure .........................................31
Setting of the GAMMA user data ................................35
RS-232C command table ...........................................36

Settings to connect to a LAN ......................................44
Controlling with a PC ..................................................46

10

E

n

TIPS

•  Use a pointed object such as a pen tip to press the

switches at the front of the monitor.

•  When you use the brightness sensor, you can automatically

change the screen brightness according to lighting 

conditions and the surrounding brightness. (See page 24.)

•  Depending on where it has been placed or the surrounding

conditions, the remote control sensor box may be 

affected by the brightness of the main unit screen and the 

brightness sensor may respond.

•  The brightness sensor may not function properly in

extremely bright or dark areas.

n

Additional input/output terminals are available by attaching 

the PN-ZB01 interface expansion board (optional).

This section is used to connect optional hardware for 

function expansion. Offering this attachment location 

is not a guarantee that future compatible hardware 

attachments will be released.

This terminal is provided for possible future (optional)

function expansion. Offering of this terminal is not a 

guarantee that future expanded functionality will be 

provided.

Caution

•  Consult your SHARP dealer for attachment/detachment of

optional parts.

•  Do not block the fan cover.

•  Do not open the expansion terminal cover by yourself. 

There are high voltage parts inside the cover which may 

cause an electric shock.

11

E

n

 

 

 

 

 

 

 

 

 

 

 

 

TIPS

•  You can use the remote control unit included with the

PN-ZR01 control kit (optional) in the same way as the

remote control unit included with this monitor.

n

 

 

 

 

TIPS

•  When the remote control sensor box of the PN-ZR01

control kit (optional) is connected to this monitor, you can

use the brightness sensor and remote control sensor of the 

remote control sensor box. 

Use when you want to establish a brightness sensor in a 

different location, etc.

•  When using the brightness sensor and remote control

sensor on this monitor when the remote control sensor box 

is connected, set CONTROL KIT SETTING to INTERNAL

on the SETUP menu. (See page 24.)

12

E

11

10

9

8

1 2 3 4 5 7

12

6

15

14

13

17

16

Caution

•  Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the 

equipment to be connected.

•  Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing 

cables connected to the input and output terminals may 

cause malfunctions and the other problems.

TIPS

•  Images may not be displayed properly depending on the

computer (video card) to be connected.

•  A screen with 1920 x 1080 resolution may not be displayed

correctly on PC RGB. In this case, check the settings of your

computer (video card) to verify that input signals conform to

specifications of this monitor. (See page 56.)

•  If there is a check box to disable EDID in display control

panel, check it when using PC RGB.

•  Use the automatic screen adjustment when a PC screen

is displayed for the first time using PC D-SUB or PC RGB,

or when the setting of the PC is changed. The screen is

adjusted automatically when SELF ADJUST in the OPTION

menu is set to ON.

•  If the audio output from the playback device is connected 

directly to speakers or other devices, the video on the monitor 

may appear delayed from the audio portion. 

Audio should be played through this monitor by connecting the 

playback device to the monitor’s audio input, and connecting 

the monitor’s audio output to the speakers or other devices.

•  The audio input terminals used in each input mode are

factory-set as follows.

PC D-SUB, PC DVI-D, PC RGB Audio input terminal
AV DVI-D

Audio1 input terminal

AV COMPONENT (BNC),  

AV S-VIDEO, AV VIDEO

(BNC)

Audio2 input terminal

AV COMPONENT (D-SUB),  

AV VIDEO (D-SUB)

Audio input terminal

PC HDMI, AV HDMI

PC/AV HDMI input terminal

  1.  PC/AV HDMI input terminal

•  Use a commercially available HDMI cable (conforming to

the HDMI standard).

•  Set HDMI of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Select the audio input terminal to be used in PC HDMI

or AV HDMI of AUDIO SELECT on the OPTION menu.

When HDMI is selected, connection to the audio input

terminal is unnecessary.

•  Set D-SUB of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Common terminal for AV COMPONENT and AV VIDEO.

•  When the PN-ZB01 (optional) is attached, select the audio

input terminal to be used in PC D-SUB of AUDIO SELECT

on the OPTION menu.

•  To use with AV VIDEO (D-SUB), connect the green

terminal to the device’s video output.

•  Use an audio cable without resistance.

•  When the PN-ZB01 (optional) is attached, set the audio

input terminal used for each input mode in AUDIO

SELECT on the OPTION menu.

•  The output sound varies depending on the input mode.

•  The volume of the output sound can be fixed by setting

AUDIO OUTPUT(RCA) on the OPTION menu.

•  It is not possible to control the sound output from the

audio output terminals with the AUDIO menu.

•  You can control the monitor from a PC by connecting a

commercially available RS-232 straight cable between

these terminals and the PC.

•  Connects the remote control sensor box of the PN-ZR01

control kit (optional). (See page 14.)

The PN-ZB01 expansion board (optional) allows the use of

additional connection terminals.
  8.  PC/AV DVI-D input terminal

•  Set DVI of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Select the audio input terminal to be used in PC DVI-D or

AV DVI-D of AUDIO SELECT on the OPTION menu.

•  The video of the PC/AV DVI-D input can be output to an

external device.

•  Outputting HDCP-encrypted video requires an external

device which supports HDCP.

•  This terminal allows the daisy chain connection of up to 5

monitors.