DOWNLOAD Sharp LL-T18A1 (serv.man2) Service Manual ↓ Size: 1.69 MB | Pages: 120 in PDF or view online for FREE

6

5

4

3

2

1

7 8

11

11

11

10

9

1. INPUT button .............................. To switch between the signal's input terminals. (Analog RGB input

terminal 

↔ DVI-D input terminal)

2. MENU button ............................... This button is used to pop-up, select and close the OSD (On Screen

Display) Menu.

3.

 button ...................................... This button is used to select menu options when the OSD Menu is

displayed.

4.

   buttons ................................ When the OSD Menu is displayed:

These buttons are used to select an option or adjust the value of
the selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight brightness .

5. Power LED .................................. This LED is lit green when in use and orange when in power-saving

mode.

6. Power button
7. Power terminal
8. DVI-D input terminal ................... Use this when connecting to the computer's digital RGB output

terminal.
It can be connected to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and which has SXGA output
ability. (Depending on the computer to be connected, correct display
may or may not be possible.)
In order to connect, it is necessary to purchase a Digital signal
cable.(Model name: NL-C01E)

9. Analog RGB input terminal ......... Use this when connecting to the computer's analog RGB output

terminal.

10. Security lock anchor ................... By connecting a security lock (commercially available) to the security

lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.

11.Ventilation openings .................... Note: Never block the ventilation openings as this may lead to

overheating inside the monitor and result in malfunction.

02_LL-T18A1_gb.p65

12/12/2002, 7:27 PM

9

- Pressure from hands on the LCD panel could

cause damage.

- Be careful not to allow your fingers to be

pinched.

- Be careful not to place any objects on the cables.

Doing so may result in disconnection or other
problems.

Standing up the monitor
Press down on the stand and lift up the top section
of the monitor.

Folding up the monitor
1.Remove the AC adapter and the signal cable.
2. If carrying out adjustments to the monitor, place

it upright.

3. While pressing the rear lock disable button (1),

gently fold back the monitor (2).

(2)

(1)

Angle adjustment
Adjust to an easy to view angle.

- Do not use the monitor when tilted back beyond

approximately 15º. The monitor may fall over
leading to injury or malfunction.

Prohibited range

approx.15°

approx.15°

approx.45°

approx.45°

02_LL-T18A1_gb.p65

12/12/2002, 7:27 PM

10

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to overly bend the cable or add

extension cords as this could lead to a
malfunction.

Connect this device's analog signal cable to the
computer.

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then
tighten the screws at both sides.

If connecting to a D-sub 15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(commercially available) to the analog signal cable.

Analog RGB terminal
(Mini D-Sub 15 pin, 3 row)

Analog signal cable

Macintosh conversion adapter

Connecting the monitor to a computer via a Digital
signal cable. (to be purchased separately)
- For digital RGB connection, the monitor has an

input for connecting to a computer with a DVI-
compatible output connector (DVI-D 24 pin or
DVI-I 29 pin) and SXGA output capability.
(Depending on the type of computer to be
connected, the display may not work correctly.)

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then
tighten the screws at both sides.

1.Connect the AC adapter to the monitor's power

terminal.

2.Attach the power cord to the AC adapter and

place the power plug into the AC outlet.

- After unplugging the AC adaptor or power cord,

be sure to wait at least 10 seconds before
plugging in again. If you put the plug back in
immediately after unplugging, damage may be
caused and the screen malfunction or not
display.

Digital signal cable

Digital RGB output
terminal (DVI-D 24
pin or DVI-I 29 pin)

DVI-D input terminal
(DVI-D24 pin)

AC adapter

Power terminal

Power cord

AC outlet

02_LL-T18A1_gb.p65

12/12/2002, 7:27 PM

11

1. Press the monitor's POWER button.
2. Turn on the computer.

The power LED will be lit green, and the screen
will display an image.

ON

Notes: (when using an analog signal)
- If using the monitor for the first time or after

having changed the system settings during use,
perform an automatic screen adjustment (p.14).

- When connecting to a notebook, if the notebook

computer's screen is set so that it is displaying at
the same time, the MS-DOS screen may not be
able to display properly. In this case, change the
settings so that only the monitor is displaying.

Use the INPUT button to switch between signal
input terminals.

Analog RGB

Digital RGB

input terminal

input terminal

INPUT

INPUT

INPUT-2(DIGITAL)

INPUT-1(ANALOG)

1. Turn the computer off.
2. Press the monitor's POWER button.

The Power LED will disappear.

OFF

If the monitor is not going to be used for a long
period of time, be sure to unplug it from the AC
outlet.

Turn on the
computer

Press power button

Press power button

Turn the
computer off

02_LL-T18A1_gb.p65

12/12/2002, 7:27 PM

12