DOWNLOAD Sharp LL-T1820 (serv.man11) Service Manual ↓ Size: 1.13 MB | Pages: 33 in PDF or view online for FREE

About the ColorSync profile
ColorSync is the Apple Corporation's color manage-
ment system and is a function that enables color
resolution to be realized when used with a compat-
ible application. A ColorSync profile describes the
color characteristics of the LCD monitor.

This monitor's ColorSync profile works with
MacOS8.5 or above.

When using the ColorSync profile, set  [COLOR
MODE] and [WHITE BALANCE] to [STD], and
set [GAMMA], [HUE] and [SATURATION] to [0].

In addition, it is necessary to have PC Exchange
or File Exchange installed in your system.

Depending on the type of computer or OS,
command names and methods may differ. Please
follow the computer’s own operation manual while
reading this.

1. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2. Copy the profile used by the application disk to

the ColorSync profile folder in the system folder.

3. Using the ColorSync on the control panel, choose

the profile to be used.

An arm or stand based on the VESA standard
(purchased separately) can be attached to the
monitor.
Procurement of the arm or stand is at the custom-
er's discretion.

Attachments must satisfy the following.
-

Compatible with the VESA standard

Have a gap of 100 mm x 100 mm between the
screw holes on the section to be attached

Not be likely to fall off or break off after being
attached to the monitor.

-

Be careful not to overly bend the cable or add
extension cords as this could lead to malfunction.

While following these instructions, please also
refer to the installation instructions in the
operation manual included with the arm or stand.

1. Remove the cable.
2. Spread out a soft cloth on a suitable horizontal

surface.

3. Being careful not to damage the monitor, gently

lay the monitor on it display-side down.

4. Remove the four screws and then remove the

stand from the monitor.

The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.

Once having removed the screws, store them
together with the stand and if the stand is ever re-
attached be sure to use the original screws. Using
different screws could lead to a malfunction.

5. Attach the arm to the monitor with the four

screws.

The screws used to attach the arm should be M4
screws with a length of 6 mm ~ 8 mm protruding
from the surface to be attached. Using different
screws could lead to malfunction or may lead to
the monitor falling off,internal damaged,personal
injury.

6 - 8 mm

CAUTION!
Do not disassemble the stand. Parts may
spring out and cause injury.

CAUTION!
Securely grasp both the display and stand,
and gently tip over. When the monitor is
inclined, the stand may suddenly pop out
and cause injury.

Screw used to attach arm

Arm

Part of monitor to which
arm is attached

When rotating the display, change the display
orientation using Pivot Software.

Windows 98/2000/Me/XP
Macintosh OS 8.x - 9.1

-

Depending on the graphics accelerator, it may be
impossible to use Pivot Software, even with a
compatible OS.

For production information and inquiries regarding
Pivot Software:

Portrait Displays, Inc.
(http://www.portrait.com)

For Windows
1. Quit all applications being used.
2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the [My computer] CD-ROM.
4. Double click on the [Pivot] folder.
5. Double click on [SETUP.exe].
6. Click [Next].
7. Choose [I accept the tems in the License

Agreement].

8. Click [Next].
9. Input your Customer information [User Name] and

[Organization].

10.Click [Next].
11.Click on [Install].

Installation will begin.

12.When the message indicating installation is

finished is displayed, click [Next].

13.Click on [Finish].
14.Click on [Yes] and restart the computer.

For Macintosh
1. Quit all applications being used.
2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the CD-ROM.
4. Double click on the [Pivot] folder.
5. Select the desired language.
6. Double click on [Install MacPortrait].
7. Drag the [MacPortrait Install] icon onto the

desired disk.
Installation will begin.

8. When the message indicating installation is

finished is displayed, click on [Restart].

For Windows
Choose [Rotate] by right clicking the mouse, or left

clicking on  

  at the lower right of the screen.

          

Each time [Rotate] is selected, the display direction
switches.

Choose [ROTATE Now] from  

  at the lower right

of the screen.

Each time [ROTATE Now] is selected, the display
direction switches.

Notes:
-

Rotation of the display to match the display
direction is done manually. (p.11)

-

The display direction on the OSD menu is
switched using [OSD PIVOT] on the [MODE
SELECT] menu. (p.21, 23)

When rotating the display, change the display
orientation using Pivot Software.

Windows 98/2000/Me/XP
Macintosh OS 8.x - 9.1

-

Depending on the graphics accelerator, it may be
impossible to use Pivot Software, even with a
compatible OS.

For production information and inquiries regarding
Pivot Software:

Portrait Displays, Inc.
(http://www.portrait.com)

For Windows
1. Quit all applications being used.
2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the [My computer] CD-ROM.
4. Double click on the [Pivot] folder.
5. Double click on [SETUP.exe].
6. Click [Next].
7. Choose [I accept the tems in the License

Agreement].

8. Click [Next].
9. Input your Customer information [User Name] and

[Organization].

10.Click [Next].
11.Click on [Install].

Installation will begin.

12.When the message indicating installation is

finished is displayed, click [Next].

13.Click on [Finish].
14.Click on [Yes] and restart the computer.

For Macintosh
1. Quit all applications being used.
2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the CD-ROM.
4. Double click on the [Pivot] folder.
5. Select the desired language.
6. Double click on [Install MacPortrait].
7. Drag the [MacPortrait Install] icon onto the

desired disk.
Installation will begin.

8. When the message indicating installation is

finished is displayed, click on [Restart].

For Windows
Choose [Rotate] by right clicking the mouse, or left

clicking on  

  at the lower right of the screen.

          

Each time [Rotate] is selected, the display direction
switches.

Choose [ROTATE Now] from  

  at the lower right

of the screen.

Each time [ROTATE Now] is selected, the display
direction switches.

Notes:
-

Rotation of the display to match the display
direction is done manually. (p.11)

-

The display direction on the OSD menu is
switched using [OSD PIVOT] on the [MODE
SELECT] menu. (p.21, 23)