DOWNLOAD Sharp LL-T1820 (serv.man11) Service Manual ↓ Size: 1.13 MB | Pages: 33 in PDF or view online for FREE

Connecting the monitor to a computer using the acces-
sory signal cable.
-

This monitor has two input terminals to enable
connection to two computers. The monitor comes
with one analog signal and one digital signal
cable. If both connections are analog, or both are
digital, you will need another signal cable sold
separately.
- Digital signal cable: model name NL-C01E
- Analog signal cable: model name NL-C02E

Using the accessory analog signal cable, connect to
the analog RGB output terminal of the computer.

-

Paying attention to connector direction, firmly
insert the signal cable to terminal, and then
tighten the screws at both sides.

If connecting to a D-sub 15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(to be purchased separately) to the analog signal
cable.

Analog signal cable

Analog RGB output
terminal

Macintosh conversion adapter

Using the accessory digital signal cable, connect
with the digital RGB output terminal of the computer.
-

For digital RGB connection, the monitor has an
input for connecting to a computer with a DVI-
compatible output connector (DVI-D 24 pin or DVI-
I 29 pin) and SXGA output capability.  (Depending
on the type of computer to be connected, the
display may not work correctly.)

-

Paying attention to connector direction, firmly
insert the signal cable to terminal, and then
tighten the screws at both sides.

Set the monitor as follows when establishing a digital
connection with a Power Mac using an ADC-DVI
adapter made by Belkin. (Operation has been
checked with the Power Mac G4 M7627J/A)
-

Perform settings with the Power Mac power
supply off.

1. After connecting the power cord, turn on the

monitor’s main power.

2. Press the   button and   button simultaneously,

and while doing this press the POWER button
(i.e. turn the power on).

3. Set the input terminal to which the Belkin ADC-

DVI adapter is connected to ON.
Use the SELECT button to select [INPUT1] or
[INPUT2], and use the     buttons to select [ON]
and [OFF].

-

Do not set to [ON] if you are not using a
Belkin ADC-DVI adapter, as this may result in
incorrect display.

4. Press the power button, and turn off the monitor

power.
This completes setting.

Digital signal cable

Digital RGB output
terminal

Input terminal 1 and 2
You can connect to either
side.

Input terminal 1 and 2
You can connect to either
side.

Power terminal

Power cord

AC outlet

This monitor is equipped with a USB standard (Rev.
1.1) self-powered hub.

Downstream (2 ports)
Each of these ports enables connection of a USB de-
vice with working current up to 500 mA.

Upstream (1 port)
This enables connection of a USB compatible com-
puter or USB hub.

If a USB cable is required, please use the one
included.

Before connecting, ensure that the shape of the
USB cable connector is correct.

For information regarding the USB function (such
as set-up) please refer to the operation manual of
the computer to be connected.

Some computers, OS and other devices may not
be able to be activated. To ascertain a certain
device's USB compatibility, please contact the
manufacturer of the device.

Upstream

USB cable

Downstream

1. Turn on the main power of the monitor.

-

When switching the main power switch on and
off, always wait for an interval of at least 5
seconds. Rapid switching may result in
malfunction.

2. Press the monitor's POWER button.

The power LED will light up orange.

3. Turn on the computer.

ON

When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed (After power is turned on, it may take a
little time until the screen is displayed.)

-

If the input terminal to which the computer is
connected has not been selected, the screen
will not be displayed. If necessary, perform
input terminal switching.  (right column)

If using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment (p. 18).

When connecting to a notebook, if the notebook
computer's screen is set so that it is displaying at
the same time, the MS-DOS screen may not be
able to display properly. In this case, change the
settings so that only the monitor is displaying.

Turn on the computer
power supply.

Use the INPUT button to switch between signal input
terminals.

Input terminal 1

Input terminal 2

INPUT-1

<             >

INPUT-2

<             >

INPUT

The input signal type (ANALOG/DIGITAL) is
displayed within angle brackets <  >.

Main power switch

Press power button

1. Turn the computer off.
2. Press the monitor's POWER button.

The Power LED will disappear.

OFF

If the monitor will not be used for a long time, turn off
the main power switch of the monitor, and remove
the power plug from the outlet.

Press power button

Turn the computer off