DOWNLOAD Sharp LL-T1815 (serv.man13) Service Manual ↓ Size: 3.61 MB | Pages: 127 in PDF or view online for FREE

About the ColorSync profile
ColorSync is the Apple Corporation's color man-
agement system and is a function that enables
color resolution to be realized when used with a
compatible application. A ColorSync profile de-
scribes the color characteristics of the LCD moni-
tor.

Notes:
- This monitor's ColorSync profile works with

MacOS8.5 or above.

- When using the ColorSync profile, set  [COLOR

MODE] and [WHITE BALANCE] to [STD], and
set [GAMMA] to [0].

Notes:
- It is necessary to have PC Exchange or File

Exchange installed in your system.

- Depending on the type of computer or OS,

command names and methods may differ. Please
follow the computer’s own operation manual
while reading this.

1.Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2.Copy the profile used by the application disk to

the ColorSync profile folder in the system folder.

3.Using the ColorSync on the control panel,

choose the profile to be used.

An arm or stand based on the VESA standard
(commercially available) can be attached to the
monitor.
Procurement of the arm or stand is at the custom-
er's discretion.

Attachments must satisfy the following.
- Compatible with the VESA standard.
- Have a gap of 100 mm x 100 mm between the

screw holes on the section to be attached.

- Not be likely to fall off or break off after being

attached to the monitor.

- Be careful not to overly bend the cable or add

extension cords as this could lead to malfunction.

- While following these instructions, please also

refer to the installation instructions in the
operation manual included with the arm or stand.

1. Remove the cable.
2. Spread out a soft cloth on a suitable horizontal

surface.

3. Being careful not to damage the monitor, gently

lay the monitor on it display-side down.

4. Remove the four screws and then remove the

stand from the monitor.

CAUTION!
Securely grasp both the display and
stand, and gently tip over. When the
monitor is inclined, the stand may sud-
denly pop out and cause injury.

Notes:
- The stand is specially made for use with this

monitor. Once having removed the stand, never
attempt to attach it to another device.

- Once having removed the screws, store them

together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to a
malfunction.

5. Attach the arm to the monitor with the four

screws.

Note:
- The screws used to attach the arm should be M4

screws with a length of 6 mm ~ 8 mm protruding
from the surface to be attached. Using different
screws could lead to malfunction or may lead to
the monitor falling off,internal damaged,personal
injury.

6 - 8mm

CAUTION!
Do not disassemble the stand. Parts may
spring out and cause injury.

Screw used to attach arm

Arm

Part of monitor to which arm is
attached

When rotating the display, change the display
orientation using Pivot Software.

Compatible operating systems (OS) for the Pivot
Software (trial version) that comes with the monitor:

Windows 98/2000/Me/XP
Macintosh OS 8.x - 9.1

- Depending on the graphics accelerator, it may be

impossible to use Pivot Software, even with a
compatible OS.

For production information and inquiries regarding
Pivot Software:

Portrait Displays, Inc.
(http://www.portrait.com)

For Windows
1. Quit all applications being used.
2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the [My computer] CD-ROM.
4. Double click on the [Pivot] folder.
5. Double click on [SETUP.exe].
6. Click [Next].
7. Choose [I accept the tems in the License

Agreement].

8. Click [Next].
9. Input your Customer information [User Name]

and [Organization].

10. Click [Next].
11. Click on [Install].

Installation will begin.

12. When the message indicating installation is

finished is displayed, click [Next].

13. Click on [Finish].
14. Click on [Yes] and restart the computer.

For Macintosh
1. Quit all applications being used.
2. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

3. Open the CD-ROM.
4. Double click on the [Pivot] folder.
5. Select the desired language.
6. Double click on [Install MacPortrait].
7. Drag the [MacPortrait Install] icon onto the

desired disk.
Installation will begin.

8. When the message indicating installation is

finished is displayed, click on [Restart].

For Windows
1.Click the right mouse button or click the left

mouse button on 

 at the lower right of the

screen.

2.Select [Rotate], [Rotate to 0] or [Rotate to 90].

Rotate .............. The display direction switches.
Rotate to 0 ....... The display direction is switched

to long width.

Rotate to 90 ..... The display direction is switched

to long height.

Choose [ROTATE Now] from  

  at the lower right

of the screen.

Each time [ROTATE Now] is selected, the display
direction switches.

Notes:
- Rotation of the display to match the display

direction is done manually. (p.10)

- The display direction on the OSD menu is

switched using [OSD PIVOT] on the [MODE
SELECT-2] menu. (p.22, 25)