DOWNLOAD Sharp LL-T17D3 (serv.man13) Service Manual ↓ Size: 1.6 MB | Pages: 127 in PDF or view online for FREE

M O D E   S E L E C T

O S D

 

H - POS I T I ON

O S D

 

V - POS I T I ON

S C A L I NG                                     3

L A NGU A G E

I N P U T - 2

D I G I T A L

1 2 8 0 x 1 0 2 4

V : 6 0 H z       H : 6 4 . 0 k H z

Notes:
- Depending on the resolution of the input signal,

even if menu options can be selected, the display
may not change.

- To choose a menu option: 

 / MODE button

- To complete adjustment: MENU button

OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to the

left and right. (    buttons)

OSD V-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up
and down. (    buttons)

The sharpness of the image can be adjusted.  (  
buttons)
Note:
- When the display mode is set to less than

1280 x 1024 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).

LANGUAGE
You can choose the language used in OSD Menu.
1. Press the   button.

The Language Selection Menu will be displayed
on the screen.

2. Use the 

 / MODE button to choose a language.

3. Press the MENU button.

Language Selection Menu will disappear.

02_LL-T17D3_gb.p65

11/29/2002, 5:14 PM

21

Always remove the plug from the AC outlet when
cleaning the monitor.

Use a soft dry cloth to lightly wipe away any grime
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.

Use a soft dry cloth to lightly wipe away dirt and
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)

- Never use thinner, benzine, alcohol, glass

cleaner, etc, as this could lead to color change or
change in shape.

- Never scratch the monitor with anything hard or

apply strong pressure as this could leave marks
or result in malfunction.

If the monitor will not be used for a long period of
time, be sure to remove the power plug from the
AC outlet.

- Do not leave the monitor in contact with rubber or

plastic items for long periods of time as this could
lead to color change or change in shape.

If you think the monitor may be faulty, please check
the following points before taking it to be repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest Sharp authorized Service Center.

The monitor's florescent tubes have a limited
life span.
- If the screen darkens, persistently flickers or

does not light up, it may be necessary to
replace the florescent tube unit. Please
inquire at the shop where you purchased the
monitor or your nearest Sharp authorized
Service Center. (Never attempt this
replacement on your own.)

- In the initial period of use, due to the

characteristics of florescent tubes the screen
may flicker. (This is not a malfunction.)
Should this happen, check by first turning off
the power, then turning it on again.

No image appears on the monitor (Power LED is
not lit)
- Are the AC adapter and the power cord

connected properly? (p. 12)

No image appears on the monitor (Power LED is lit)
- Is the computer connected properly? (p. 11)
- Is the computer turned on?
- Is the signal's input terminal switched to the

correct one? (p. 13)

- Does the computer's signal timing correspond to

monitor specifications? (p. 24)

- Is the computer in power-saving mode?

Control buttons do not work
- Is the adjustment lock on? (p. 14)

The image appears distorted
- Does the computer's signal timing correspond to

monitor specifications? (p. 24)

- If you are using the analog signal, perform

automatic screen adjustment. (p. 16)

- If you can change the refresh rate on the

computer you are using, change the value to a
lower frequency.

No sound can be heard from the speakers
- Is the audio cable connected correctly? (p. 12)
- Perform the volume adjustment procedure.(p. 15)
- Are the headphones connected?
- These is no sound from the speakers when the

monitor is in power-saving mode.

When attempting to raise the display section, it
is found hard to lift.
- Be sure to press the lock disable button while

folding back the monitor.
If this is not done it will become hard to lift the
monitor next time.

- If you forget to press the lock disable button while

folding back the monitor, lift the monitor forward
to the limit of its travel (approx.5°). Then while
pressing the lock disable button, gently fold back
the monitor again.(p. 10)

02_LL-T17D3_gb.p65

11/29/2002, 5:14 PM

22

Model name

LL-T17D3-H (Frosty gray) / LL-T17D3-B (Black)

LCD display

43 cm measured diagonally TFT LCD module

Resolution (max.)

SXGA 1280 x 1024 pixels

Displayable colors (max.)

Approx.16.19 million colors (6bit + FRC)

Brightness (max.)

250cd/m

2

Dot pitch

0.264(H) x 0.264(V) mm

Contrast ratio

500:1

Angle of visibility

Left-right 160°; Up-down 135° (contrast ratio 

>

=

 5)

Screen display size

Horizontal 337.9 mm x Vertical 270.3 mm

Video signal

Analog: Analog RGB (0.7Vp-p) [75

Ω]

Digital: DVI standard based on 1.0

Sync signal

Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)

Expansion compensation

Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)

Plug & Play

VESA DDC1/DDC2B compatible

Power management

VESA: based on DPMS
DVI:

based on DMPM

Speaker output

1W + 1W

Input signal terminal

Analog:

15 pin mini D-sub (3 rows)

Digital / Analog: 29 pin DVI-I

Audio input terminal

Mini stereo jack

Headphone terminal

Mini stereo jack

Screen tilt

Upward approx.0 - 20°; downward approx.0 - 5°

Screen swivel

Approx.90° from left through right (Turn table type)

Power supply

AC100 - 240V, 50/60Hz (Use special AC adapter,
type NL-A64J of Sharp Corporation.)

Temperature of operating environment

5 - 35°C

Power consumption

40W (With no audio input)
(47W maximum, 3W when in power-saving mode)
(Use special AC adapter.)

Dimensions

Approx. 398(W) x 188(D) x 376(H) mm

Weight

Approx. 6.5kg
(Excluding AC adapter and signal cable.)

(Units: mm)

61.5

188

398

344

376

239

- Special AC adapter:

Approx. 1.5 m

Approx. H 147 mm x D 59 mm x H 32 mm

- Analog signal cable: Approx. 1.8m
- Audio cable : Approx. 1.8m
- Digital signal cable, NL-C01E (purchased

separately): Approx. 2.0m

- Analog signal cable, NL-C02E (purchased

separately): Approx. 2.0m

02_LL-T17D3_gb.p65

11/29/2002, 5:14 PM

23

640x480

800x600

1024x768

1152x864
1280x960

1280x1024

720x400
640x480
832x624

1024x768
1152x870

1280x1024

1024x768

1152x900

1280x1024

31.5kHz
37.9kHz
37.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
67.5kHz
60.0kHz
64.0kHz
80.0kHz
31.5kHz
35.0kHz
49.7kHz
60.2kHz
68.7kHz
64.0kHz
80.0kHz
48.3kHz
53.6kHz
56.6kHz
61.8kHz
71.7kHz

60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
75Hz
70Hz

66.7Hz
74.6Hz

75Hz
75Hz
60Hz
75Hz
60Hz
66Hz
70Hz
66Hz

67.2Hz

25.175MHz

31.5MHz
31.5MHz
36.0MHz
40.0MHz
50.0MHz
49.5MHz
65.0MHz
75.0MHz

78.75MHz
108.0MHz
108.0MHz
108.0MHz
135.0MHz

28.3MHz
30.2MHz
57.3MHz
80.0MHz

100.0MHz
108.0MHz
135.0MHz
64.13MHz

70.4MHz

74.25MHz
94.88MHz

117.01MHz

- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and Sun Ultra

series are reference values. To connect, another
adapter (commercially available) may be
required.

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.

640x480

800x600

1024x768

1152x864
1280x960

1280x1024

720x400

31.5kHz
37.9kHz
37.5kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
67.5kHz
60.0kHz
64.0kHz
31.5kHz

60Hz
72Hz
75Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
70Hz

25.175MHz

31.5MHz
31.5MHz
40.0MHz
50.0MHz
49.5MHz
65.0MHz
75.0MHz

78.75MHz
108.0MHz
108.0MHz
108.0MHz

28.3MHz

- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to

DVI (DVI-D24 pin or DVI-I29 pin) and with SXGA
output capability can be connected here.
(Depending on the type of computer to be
connected, the display may not work correctly.)

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.

02_LL-T17D3_gb.p65

11/29/2002, 5:14 PM

24