DOWNLOAD Sharp LL-T15G3 (serv.man17) Service Manual ↓ Size: 6.74 MB | Pages: 116 in PDF or view online for FREE

Installing monitor set-up information into Win-
dows2000, and setting the monitor's ICC profile as
a predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk (provided) into the

computer's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. Click on [Properties], [Driver] and [Update

Driver].

6. When [Upgrade Device Driver Wizard] appears,

click [Next].

7. Check [Display a list of the known drivers for

this device so that I can choose a specific
driver] and click [Next].

8. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [A:], and click [OK].

9. Select the monitor from the list displayed and

click [Next].

10. Click [Next], confirm that the monitor's name

appears on the screen, and click [Finish]. If
[The Digital Signature Not Found] appears, click
[Yes].

11. Click on [Close].
12. Click [OK], and close the window.
13. Remove the Utility Disk from the A drive.

Installing monitor set-up information into
WindowsMe, and setting the monitor's ICC profile
as a predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

If the "Add new Hardware Wizard" has appeared:

1. Place the Utility Disk (provided) into the

computer's A drive.

2. Check [Specify the location of the driver

[Advanced]] and click [Next].

3. Check [Display a list of all the drivers in a

specific location, so you can select the driver
you want.], then click [Next].

4. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [A:], and click [OK].

5. Select the monitor details from the list, then

click [Next], [Next], and [Finish]. If the "Add new
Hardware Wizard" appears, repeat the
installation commands beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not ap-
peared:

1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Check [Specify the location of the driver

[Advanced]] and click [Next].

7. Check [Display a list of all the drivers in a

specific location, so you can select the driver
you want.] and click [Next].

8. When [Models] is displayed, click on [Have

disk], confirm that [Copy manufacturer's files
from:] is [A:], and click [OK].

9. Select the monitor details, then click [Next],

[Next], and [Finish].

10. Check that the monitor details are displayed,

then click [Apply].

11. Click [OK], and close the window.
12. Remove the Utility Disk from the A drive.

Installing monitor set-up information into
WindowsXP, and setting the monitor's ICC profile
as a predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. Choose [Control

Panel].

3. Switch to "Classic View".
4. Double click on [Display].
5. Click on [Settings], [Advanced] and [Monitor].
6. Click on [Properties], [Driver] and [Update

Driver].

7. When [Hardware Update Wizard] appears,

check [Install from a list or specific location
[Advanced]] and click [Next].

8. Check [Don't search. I will choose the driver to

install.] and click [Next].

9. Click on [Have Disk], confirm that [Copy

manufacturer's  files from:]  is [A:], and click
[OK].

10. Select the monitor from the list displayed and

click [Next].
If [has not passed Windows Logo testing...]
appears, click [Continue Anyway].

11. Confirm that the monitor's name appears on the

screen.

12. Click on [Finish].
13. Click on [Close].
14. Click [OK], and close the window.
15. Remove the Utility Disk from the A drive.

02_LL-T15G3_gb.p65

10/28/2002, 9:04 AM

13

About the ColorSync profile
ColorSync is the Apple Corporation's color
management system and is a function that
enables color resolution to be realized when
used with a compatible application. A ColorSync
profile describes the color characteristics of the
LCD monitor.
Notes:
- This monitor's ColorSync profile works with

MacOS8.5 or above.

- When using the ColorSync profile, set

[COLOR MODE] and [WHITE BALANCE] to
[STD].

Notes:
- A floppy disk drive is necessary. In addition, it is

necessary to have PC Exchange or File
Exchange installed in your system.

- Depending on the type of computer or OS,

command names and methods may differ. Please
follow the computer’s own operation manual
while reading this.

1.Place the Utility Disk (provided) into the

computer’s floppy disk drive.

2.Copy the profile to be used from the Mac folder

on the Utility Disk to the ColorSync profile folder
located within the system folder.

3.Using the ColorSync on the control panel,

choose the profile to be used.

Installing the monitor’s ICC profile. (If the set-up
information has already been installed, so too has
the profile, and there is no need to install it.)
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk in the computer’s A drive.
2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings] and [Advanced].
5. Click on [General] and from [Compatibility]

select [Apply the new display setting without
restarting], then click on [Color Management].

6. Click [Add], and select [3 ½ Floppy [A:]] as the

file location.

7. Choose the color profile that you would like to

install, and click on [Add].

8. Choose the profile and click on [Set As Default].
9. Click [OK], and close the window.
10. Remove the Utility Disk from the A drive.

- When using an ICC profile, set  [COLOR MODE]

and [WHITE BALANCE] to [STD] .

02_LL-T15G3_gb.p65

10/28/2002, 9:04 AM

14

Adjustment the backlight (right column)
Brightness of backlight can be adjusted.

COLOR MODE setting (p. 16)
Color tone can be set.

Automatic screen adjustment (p.16)
The CLOCK, PHASE, H-POS (horizontal position-
ing) and V-POS (vertical positioning) functions can
be adjusted automatically.

Manual screen adjustment (p. 17)
Fine adjustments can be made using the On
Screen Display (OSD) Menu.

Note:
- All adjustments will be saved even after turning

the power off.

All adjustment values can be returned to their
original ex-factory values in one command.
1. Turn off the monitor power.
2. Press the MENU button and the 

 / MODE

button simultaneously, and while doing this press
the power button (i.e. turn the power on).
Continue to press the button until [ALL RESET]
appears on the screen. Reset is complete when
the displayed message disappears.

Notes:
- While ALL RESET is displayed, the control

buttons are disabled.

- It is not possible to reset values when the

adjustment lock is in place. Remove the
adjustment lock before attempting to operate
control buttons.

Settings of items in the ADJUSTMENT Menu
(CLOCK, PHASE, H-POS, V-POS) can be returned
to their original ex-factory values.
1. Turn on the monitor power.

2. Press the MENU button and the   button

simultaneously. When [RESET] appears on the
screen, the reset is complete.

By disabling the control buttons (i.e. setting the
lock) any attempted changes to adjusted values will
be voided.
1. Turn off the monitor power.
2.While pressing the MENU button, press the

power button (i.e. turn the power on).
 [ADJUSTMENT LOCKED] will appear on

     the screen, and the lock will be set.

Note:
- When the lock is in place, all buttons other than

the power button are disabled.

Adjustment lock release
1. Turn off the monitor power.
2.While pressing the MENU button, press the

power button (i.e. turn the power on).
 [ADJUSTMENT UNLOCKED] will appear

     on the screen, and the lock will be
     removed.

1. Without the OSD Menu being displayed, push the

 or the   button.

BRIGHT

31

2. Adjust by pressing the   button (darker) or 

button (lighter).

Note:
- On Screen display for adjustment disappears

several seconds after the last operation.

02_LL-T15G3_gb.p65

10/28/2002, 9:04 AM

15

Color tone can be set as below.

Displays image with the color tone results from
original scheme of liquid crystal panel.

sRGB is international standard of color represen-
tation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal’s characteristics and represents
color tone close to it original image.

Displays an image with dynamic and VIVID
primary colors.

- If COLOR MODE is set to [sRGB] or [VIVID],

[WHITE BALANCE] in the ADJUSTMENT Menu
is set to [STD].

Press the 

 / MODE button when the ADJUST-

MENT Menu is not displayed.
Each time the button is pressed the next menu item
appears. (STD 

→ sRGB → VIVID → STD)

On Screen display for adjustment disappears
several seconds after the last operation.

Options in the ADJUSTMENT Menu can be
adjusted automatically (CLOCK, PHASE, H-POS,
V-POS).

Note:
- When setting up this monitor for the first time or

after having changed an aspect of the current
system, perform an automatic screen adjustment
before use.

To perform an automatic adjustment, first display
an image that makes the entire screen very bright.
If you are using Windows, you can also use the
Adjustment Pattern on the accompanying Utility
Disk for Windows.

Displaying the Adjustment Pattern (for Windows)
This explanation is for Windows 95/98/2000/Me/XP,
and assumes that the floppy disk drive is [A drive].
Note:
- If the floppy disk drive of your computer is not

"A drive", please read the below substituting the
floppy disk drive you are using in place of
"A drive" or "A".

1. Place the Utility Disk (provided) into the

computer's A drive.

2. Open [My Computer] and select [3 ½ Floppy

(A:)]. If using Windows 3.1, open [File Manager]
and choose "A drive".

3. Double click on [Adj_uty.exe] to run the

Adjustment Program. The Adjustment Pattern will
appear.

Adjustment pattern

After completing the adjustment, press the
computer's [Esc] key to exit the Adjustment
Program.

Note:
- If your computer's display mode is set to 65K

colors, you may see the different color levels in
each color pattern or the gray scale may look
colored. (This is due to the input signal
specification and is not a malfunction.)

02_LL-T15G3_gb.p65

10/28/2002, 9:04 AM

16