DOWNLOAD Sharp LL-T15G1 Service Manual ↓ Size: 828.64 KB | Pages: 22 in PDF or view online for FREE

Model
LL-T15G1
Pages
22
Size
828.64 KB
Type
PDF
Document
Service Manual
Brand
Device
Monitor / Complete
File
ll-t15g1.pdf
Date
PREV: Sharp LL-T15A4 (serv.man5) Driver / Update

Sharp LL-T15G1 Service Manual ▷ View online

LL-T15G1/E15G1
CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
2 – 4
4. ADJUSTING THE SCREEN DISPLAY
Adjustment the backlight (right column)
Brightness of backlight can be adjusted.
Automatic screen adjustment
The CLOCK, PHASE, H-POS (horizontal positioning) and V-POS (verti-
cal positioning) functions can be adjusted automatically.
Manual screen adjustment
Fine adjustments can be made using the On Screen Display (OSD)
Menu.
Note: All adjustments will be saved even after turning the power off.
■
■
■
■
Resetting all adjustment values
All adjustment values can be returned to their original ex-factory values
in one command.
1.  Turn off the monitor power.
2.  Press the MENU button and the SELECT button simultaneously,
and while doing this press the power button (i.e. turn the power on).
When [ALL RESET] appears on the screen, the reset is complete.
3.  Turn off the monitor power.
Notes: • While ALL RESET is displayed, the control buttons are dis-
abled.
•  It is not possible to reset values when the adjustment lock is
in place. Remove the adjustment lock before attempting to
operate control buttons.
■
■
■
■
ADJUSTMENT menu reset
The adjustment values of the analogue signal time’s ADJUSTMENT
menu can be returned to their original ex-factory values.
1.  Turn on the monitor power.
2.  Press the MENU button and the 
e
 button simultaneously. When
[RESET] appears on the screen, the reset is complete.
■
■
■
■
Adjustment lock function
By disabling the control buttons (i.e. setting the lock) any attempted
changes to adjusted values will be voided.
1.  Turn off the monitor power.
2.  While pressing the MENU button, press the power button (i.e. turn
the power on).
Continue to press the button until the message appears on the
screen.
When the menu is unlocked:
[ADJUSTMENT LOCKED] will appear on the screen, and the
lock will be set.
When the menu is locked:
[ADJUSTMENT UNLOCKED] will appear on the screen, and the
lock will be removed.
Note: When the lock is in place, all buttons other than the power button
are disabled.
4-1. ADJUSTING THE BACKLIGHT
1.  Without the OSD Menu being displayed, press the 
e
 button or the 
d
button.
2.  Adjust by pressing the
 e
 button (darker) or the
 d
 button (lighter).
The BRIGHT bar automatically disappears several seconds after
the last command.
4-2. AUTOMATIC SCREEN ADJUSTMENT
Options in the ADJUSTMENT Menu can be adjusted automatically 
(CLOCK, PHASE, H-POS V-POS).
Note: When setting up this monitor for the first time or after having
changed an aspect of the current system, perform an automatic
screen adjustment before use.
■
■
■
■
Automatic adjustment screen display
To perform an automatic adjustment, first display an image that makes
the entire screen very bright. If you are using Windows, you can also
use the Adjustment Pattern on the accompanying Utility Disk for Win-
dows.
Displaying the Adjustment Pattern (for Windows)
This explanation is for Windows 95/98/2000/Me, and assumes that the
floppy disk drive is [A drive].
Note: If the floppy disk drive of your computer is not “A drive”, please
read the below substituting the floppy disk drive you are using in
place of “A drive” or “A”.
1.  Place the Utility Disk (provided) into the computer’s A drive.
2.  Open [My Computer] and select [3 
1
/
2
 Floppy (A:)]. If using Windows
3.1, open [File Manager] and choose “A drive”.
3.  Double click on [Adj_uty.exe] to run the Adjustment Program. The
Adjustment Pattern will appear.
After completing the adjustment, press the computer’s [Esc] key to
exit the Adjustment Program.
Note: If your computer’s display mode is set to 65K colors, you may
see the different color levels in each color pattern or the gray
scale may look colored. (This is due to the input signal specifica-
tion and is not a malfunction.)
B R I G H T         3 1
Adjustment pattern
LL-T15G1/E15G1
CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
2 – 5
■
■
■
■
Adjusting the screen automatically
1.  Press the MENU button.
The ADJUSTMENT Menu will be displayed.
2. Press 
the 
d
 button.
The screen will become dark and [ADJUSTING] will be displayed.
After a few seconds the ADJUSTMENT Menu will return. (The auto-
matic adjustment is now complete.)
3.  Press the MENU button 4 times to make the On Screen Display
(OSD) Menu disappear.
Notes: • In most cases automatic adjustment is sufficient.
•  If necessary due to any of the following, manual adjustments
can be performed after the automatic adjustment.
•  When further fine adjustment is needed.
•  When the computer’s video input signals are Composite
Sync or Sync On Green.
(Automatic adjustments may not be possible.)
•  When [OUT OF ADJUST] is displayed.
(When the screen displays an entirely dark image, the
automatic screen adjustment may be disabled. When
making an automatic adjustment, be sure to either use the
Adjustment Pattern or try displaying an image that makes
the entire screen very bright.)
4-3. MANUAL SCREEN ADJUSTMENT
Adjustments can be made using On Screen Display (OSD) Menu pro-
vided.
1.  Display an image that makes the entire screen very bright. If using
Windows, you can open and use the Adjustment Pattern on the
accompanying Utility Disk.
2.
Press the MENU button.
The ADJUSTMENT Menu will be displayed.
At this point relevant menu options can be adjusted.
Each time the MENU button is pressed the next menu is selected.
(ADJUSTMENT 
3
 GAIN CONTROL 
3
 WHITE BALANCE 
3
MODE SELECT 
3
 OSD Menu disappears)
Notes: • The OSD Menu automatically disappears approximately 30
seconds after the last command.
•  This explanation is based on using the Adjustment Pattern
(for Windows) to make adjustments.
MENU 1: ADJUSTMENT
MANUAL : Individual menu options are manually adjusted.
AUTO
: Every menu option is automatically adjusted.
Notes: • Press the 
d
 button to select [AUTO].
•  To choose a menu option: SELECT button
•  To go to the next menu: MENU button
CLOCK
The figure below demonstrates how to adjust so that vertical flicker
noise is not emitted. (
e d
 buttons)
PHASE
The figure below demonstrates how to adjust so that horizontal flicker
noise is not emitted. (
e d
 buttons)
Note: Adjustments to PHASE should be made only after CLOCK has
been correctly set.
H-POS (horizontal positioning) and V-POS
(vertical positioning)
To center the screen image within the boundaries of the screen, adjust
the left-right (H-POS) values and the up-down (V-POS) values. 
(
e d
 buttons)
A D JU S T ME N T
           MANU A L                         A U T O
C L OC K                                       1 2 7
P H A S E                                           1 6
H- P O S                                       2 0 0
V - P O S                                           2 9
1 0 2 4 X 7 6 8
V : 7 5 H z       H : 6 0 . 0 k H z
A D JU S T ME N T
           MANU A L                         A U T O
C L OC K                                       1 2 7
P H A S E                                           1 6
H- P O S                                       2 0 0
V - P O S                                           2 9
1 0 2 4 X 7 6 8
V : 7 5 H z       H : 6 0 . 0 k H z
A D JU S T ME N T
           MANU A L                         A U T O
C L OC K                                       1 2 7
P H A S E                                           1 6
H- P O S                                       2 0 0
V - P O S                                           2 9
1 0 2 4 X 7 6 8
V : 7 5 H z       H : 6 0 . 0 k H z
Vertical flicker noise
Horizontal flicker noise
Screen frame
Adjustment
pattern
LL-T15G1/E15G1
CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
2 – 6
MENU 2: GAIN CONTROL
MANUAL : Individual menu options are manually adjusted.
AUTO
: Every menu option is automatically adjusted using the Auto
Gain Control* function.
Notes: • Press the 
d
 button to select [AUTO].
•  To choose a menu option: SELECT button
•  To go to the next menu
: MENU button
* Auto Gain Control function
•  The Auto Gain Control adjusts contrast and black level based on
the brightest color of the image displayed. If you are not using the
Adjustment Pattern it is necessary to have an area of 5 mm 
u
 5 mm
of white displayed, and if not adjustments may not be possible. (In
such case, [OUT OF ADJUST] will appear and setting values
remain unchanged.)
•  If the signal coming from the computer is composite sync or sync
on green, automatic adjustment cannot be performed. Please per-
form manual adjustment instead.
BLACK LEVEL
Total screen brightness can be adjusted while watching the color pat-
tern. (
e d
 buttons)
CONTRAST
While watching the color pattern, adjustments can be made so that all
graduations appear. (
e d
 buttons)
MENU 3: WHITE BALANCE
Notes: • On settings other than [STD] not all graduations can be dis-
played. To display all graduations, set to [STD].
• Use the 
e d
 buttons to select [COOL], [ • ], [STD], [ • ], 
[WARM] or [USER].
•  Selecting USER will display the setting values for [R-CON-
TRAST], [G-CONTRAST] and [B-CONTRAST], in order to
make fine adjustments.
•  Use the SELECT button to select [R-CONTRAST], [G-CON-
TRAST] and [B-CONTRAST].
•  To go to the next menu: MENU button
COOL 
: Color tone bluer than standard
• 
: Color tone slightly bluer than standard
STD 
: Color tone standard setting
• 
: Color tone slightly redder than standard
WARM
: Color tone redder than standard
USER
R-CONTRAST
:
e
 button for blue-green
d
 button for red
G-CONTRAST
:
e
 button for purple
d
 button for green
B-CONTRAST
:
e
 button for yellow
d
 button for blue
MENU 4: MODE SELECT
Notes: • Depending on the resolution of the input signal, even if menu
options can be selected, the display may not change.
•  To choose a menu option
: SELECT button
•  When adjustment complete : MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the left and right. 
(
e d
 buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up and down. (
e d
 buttons)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-line screen when
using US text, etc. (
e d
 buttons)
640: 640 
u
 400 dot mode
720: 720 
u
 400 dot mode (US text etc.)
Note: As the resolution input for other than 400 lines is done automati-
cally, there is no need to set it.
SCALING (Level of scaling)
The sharpness of the image can be adjusted. (
e d 
buttons)
Notes: • When the display mode is set to less than 1024 
u
 768 pixels,
the display is enlarged to cover the whole screen (i.e. the side
ratio of the display may change).
•  If a resolution of 1024 
u
 768 pixels cannot be achieved even
after expansion is attempted, the screen’s perimeter will dis-
play black. (This is not a malfunction.)
COLORS
Maximum display colors can be set. (
e d
 buttons)
260K (260,000) and 16M (16.19 million)
LANGUAGE
Messages displayed on the screen and OSD Menu contents can be
changed to the following languages.
Dutch, English, French, German, Spanish, Italian, Swedish.
1. Press 
the
 d
 button.
The Language Selection Menu will be displayed on the screen.
2.  Use the SELECT button to choose a language.
3.  Press the MENU button or the 
d
 button.
The setting is complete.
G A I N  C ON T R O L
                        MANU A L                       A U T O
B L AC K  L E V E L                   1 6
CON T R A S T                               8 0
1 0 2 4 X 7 6 8
V : 7 5 H z       H : 6 0 . 0 k H z
Color pattern
WH I T E   B A L A N C E
C OOL
 
S TD
 
WA R M
 
U S E R
R- CONTRAST
G- CONTRAST
B - CONTRAST
1 0 2 4 X 7 6 8
V : 7 5 H z       H : 6 0 . 0 k H z
M O D E   S E L E C T
O S D
 
H - POS I T I ON
O S D
 
V - POS I T I ON
4 0 0
 
L I NE S                                     6 4 0
7 2 0
S C A L I NG                                     3
L A NGU A G E
1 0 2 4 X 7 6 8
V : 7 5 H z       H : 6 0 . 0 k H z
LL-T15G1/E15G1
CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
2 – 7
5. ADJUSTMENT
5-1. ADJUSTMENT ITEM LIST
BUTTON
ITEM
ADJUSTMENT
DESCRIPTION
MENU
MENU 1: 
ADJUSTMENT
MANUAL
CLOCK
0~255
CLOCK:  The figure below demonstrates how to 
adjust so that vertical flicker noise is not 
emitted. (
e d
 buttons)
MENU 1
4
MENU 2
4
MENU 3
4
MENU 4
4
MENU END
PHASE
0~31
PHASE:
The figure below demonstrates how to 
adjust so that horizontal flicker noise is not 
emitted. (
e d
e d
e d
e d
 buttons)
H-POS
H-POS (horizontal positioning) and 
V-POS (vertical positioning)
To center the screen image within the boundaries of
the screen, adjust the left-right (H-POS) values and
the up-down (V-POS) values. (
e d
e d
e d
e d
 buttons)
V-POS
AUTO
Automatic screen adjustment
Options in the ADJUSTMENT Menu can be 
adjusted automatically
(CLOCK, PHASE, H-POS V-POS).
MENU 2: 
GAIN CONTROL
MANUAL
BLACK LEVEL
0~63
BLACK LEVEL: Total screen brightness can be 
adjusted while watching the color pat-
tern. (
e d
 buttons)
CONTRAST
0~100
CONTRAST:
While watching the color pattern, 
adjustments can be made so that all 
graduations appear. (
e d
e d
e d
e d
 buttons)
AUTO
GAIN CONTROL Menu
AUTO:
Every menu option is automatically adjusted 
using the Auto Gain Control function.
MENU 3: WHITE BALANCE
COOL • STD • WARM
(5 levels), 
USER R • G • B: 0~100
WHITE BALANCE Menu
COOL  : Color tone bluer than standard
• 
: Color tone slightly bluer than standard
STD 
: Color tone standard setting
• 
: Color tone slightly redder than standard
WARM : Color tone redder than standard
USER
R-CONTRAST :
e
 button for blue-green
d
 button for red
G-CONTRAST :
e
 button for purple
d
 button for green
B-CONTRAST :
e
 button for yellow
d
 button for blue
MENU 4: 
MODE SELECT
OSD H-POSITION
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to
the left and right. (
e d
 buttons)
OSD V-POSITION
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. (
e d
 buttons)
400 LINES
640 • 720
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc.
(
e d
 buttons)
640: 640 
u
 400 dot mode
720: 720 
u
 400 dot mode (US text etc.)
SCALING
1~5
SCALING (Level of scaling)
The sharpness of the image can be adjusted. 
(
e d 
buttons)
COLORS
Maximum display colors can be set. (
e d
 buttons)
260K (260,000) and 16M (16.19 million)
LANGUAGE
7 countrys
DEUTSCH, ENGLISH, 
ESPANOL, FRANCAIS, 
ITALIANO, NETHER-
LAND, SVENSKA
LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following languages.
Dutch, English, French, German, Spanish, Italian,
Swedish.
SELECT
Select the item
 < >
0~31
Adjusting the backlight
POWER OFF
Page of 22
Display

Click on the first or last page to see other LL-T15G1 service manuals if exist.

RANDOM: