DOWNLOAD Sharp LL-T15G1 Service Manual ↓ Size: 828.64 KB | Pages: 22 in PDF or view online for FREE

LL-T15G1/E15G1

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 4

Press down on the stand and adjust it to a suitable viewing angle.

1.  Remove the AC adapter and the RGB signal cable.

2.  Press down on the stand and gently fold back the monitor.

•  Be careful not to pinch your fingers.

•  Do not use the monitor when tilted back beyond approximately

25°.The monitor may fall over leading to injury or malfunction.

5

25

approx.

approx.

Prohibited range

approx.25

approx.5

LL-T15G1/E15G1

CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS

2 – 1

When connecting, ensure that both the monitor and computer are
switched off.

Note: Do not overly bend the cable or add extension cords as this could

lead to malfunction.

Before connecting, first turn off the monitor’s main power switch.

Note: Do not overly bend the cable or add extension cords as this could

lead to malfunction.

1.

Connect the AC adapter to the monitor’s power terminal

2.

Attach the power cord to the AC adapter and place the power plug

into the AC terminal

1. Press the monitor’s power button. 

2.

Turn on the computer.

The power LED will be lit green, and the screen will display an image.

Notes: • If using the monitor for the first time or after having changed

the system setting during use, perform an automatic screen

adjustment.

•  Depending on the computer or OS, it may be necessary to use

the computer to install monitor set-up information. If so, follow

the steps below to install the monitor set-up information. 

1.  Turn the computer off.

2.  Press the monitor's power button.

The Power LED will disappear.

If the monitor is not going to be used for a long period of time, be

sure to unplug it from the AC outlet.

Depending on the computer or OS, it may be necessary to use the com-

puter to operate the installation of monitor set-up information etc. If so,
follow the steps below to install the monitor set-up information.

(Depending on the type of computer or OS, command names and meth-
ods may differ. Please follow the computer’s own operation manual

while reading this.)

■

An ICC (International Color Consortium) profile is a file that describes the
color characteristics the LCD monitor. By using an application that works

together with an ICC profile, a high color resolution can be realized.

•  Windows98, WindowsMe and Windows2000 all use the ICC profile.

• When installing Windows98, WindowsMe and Windows2000 set-up

information (described below), the ICC profile is also installed. If you

would like to install the ICC program only, please refer to Installing

the ICC profile on page 15.

•  When using the ICC profile, please set the [WHITE BALANCE] to [STD].

Firmly insert the analog RGB terminal
(mini D-sub 15 pin with 3 rows) then
tighten the screws each side.

RGB signal cable

If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conver-
sion adapter (to be purchased separately) to
the RGB signal cable.

Macintosh conversion adapter

RGB signal cab le

After connecting the adapter, tighten the
screws on each side to fix into place.

Power terminal

AC adapter

Power cord

AC terminal

ON

Turn on device to
which monitor is
connected

Press power button

OFF

Press power button

Turn off device
to which monitor
is connected

LL-T15G1/E15G1

CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS

2 – 2

■

Installing monitor set-up information into Windows95.

This explanation assumes that the floppy disk drive is “A drive”.

1.  Place the Utility Disk (provided) into the computer’s A drive.

2.  Click on the [Start] button. From [Settings], choose [Control Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced Properties], and [Monitor], then 

[Change].

5.  Click on [Have disk], confirm that [Copy manufacturer’s files from:]

is [A:] then click [OK].

6.  Confirm that the monitor details are selected, and click [OK].

7.  Check that the monitor details are displayed, then click [Apply].

8.  Click [OK], and close the window.

9.  Remove the Utility Disk from the A drive.

Installing monitor set-up information into Windows98, and setting the
monitor’s ICC profile as a predetermined value.

This explanation assumes that the floppy disk drive is “A drive”.

If the “Add new Hardware Wizard” has appeared:

1.  Place the Utility Disk (provided) into the computer’s A drive.

2. Click 

[Next].

3.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.], then click [Next].

4.  When [Models] is displayed, click on [Have disk], confirm that [Copy

manufacturer’s files from:] is [A:], and click [OK].

5.  Confirm that the monitor details are selected, then click [Next],

[Next], and [Finish]. If the “Add New Hardware Wizard” appears,
repeat the installation commands beginning from 2 above.

6.  Remove the Utility Disk from the A drive.

If the “Add New Hardware Wizard” has not appeared:

1.  Place the Utility Disk in the computer’s A drive.

2.  Click on the [Start] button. From [Settings], choose [Control Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced] and [Monitor].

5.  In [Options], check [Automatically detect Plug & Play monitors] and

click on [Change].

6. Click 

[Next].

7.  Click on [Display a list of all the drivers in a specific location, so you

can select the driver you want.], then click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that [Copy

manufacturer’s files from:] is [A:], and click [OK].

9.  Confirm that the monitor details are selected, then click [Next],

[Next], and [Finish].

10.  Check that the monitor details are displayed, then click [Apply].

11.  Click [OK], and close the window.

12.  Remove the Utility Disk from the A drive.

Installing monitor set-up information into Windows2000, and setting the
monitor’s ICC profile as a predetermined value.
This explanation assumes that the floppy disk drive is “A drive”.

1.  Place the Utility Disk (provided) into the computer’s A drive.

2.  Click on the [Start] button. From [Settings], choose [Control Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced] and [Monitor].

5.  Click on [Properties], [Driver] and [Update Driver].

6.  When [Upgrade Device Driver Wizard] appears, click [Next].

7.  Check [Display a list of the known drivers for this device so that I

can choose a specific driver] and click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that [Copy

manufacturer’s files from:] is [A:], and click [OK].

9.  Select the monitor from the list displayed and click [Next].

10. Click [Next], confirm that the monitor’s name appears on the

screen, and click [Finish]. If [The Digital Signature Not Found]
appears, click [Yes].

11. Click on [Close].

12.  Click [OK], and close the window.

13.  Remove the Utility Disk from the A drive.

Installing monitor set-up information into WindowsMe, and setting the
monitor’s ICC profile as a predetermined value.
This explanation assumes that the floppy disk drive is “A drive”.

If the “Add new Hardware Wizard” has appeared:

1.  Place the Utility Disk (provided) into the computer’s A drive.

2.  Check [Specify the location of the driver [Advanced]] and click

[Next].

3.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.], then click [Next].

4.  When [Models] is displayed, click on [Have disk], confirm that [Copy

manufacturer’s files from:] is [A:], and click [OK].

5.  Select the monitor details from the list, then click [Next], [Next], and

[Finish]. If the “Add new Hardware Wizard” appears, repeat the
installation commands beginning from 2 above.

6.  Remove the Utility Disk from the A drive.

If the “Add New Hardware Wizard” has not appeared:

1.  Place the Utility Disk in the computer’s A drive.

2.  Click on the [Start] button. From [Settings], choose [Control Panel].

3.  Double click on [Display].

4.  Click on [Settings], [Advanced] and [Monitor].

5.  In [Options], check [Automatically detect Plug & Play monitors] and

click on [Change].

6.  Check [Specify the location of the driver [Advanced]] and click

[Next].

7.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.] and click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that [Copy

manufacturer’s files from:] is [A:], and click [OK].

9.  Select the monitor details, then click [Next], [Next], and [Finish].

10.  Check that the monitor details are displayed, then click [Apply].

11.  Click [OK], and close the window.

12.  Remove the Utility Disk from the A drive.

LL-T15G1/E15G1

CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS

2 – 3

■

Installing the monitor’s ICC profile. (If the set-up information has already
been installed, so too has the profile, and there is no need to install it.)

This explanation assumes that the floppy disk drive is “A drive”.

1.  Place the Utility Disk in the computer’s A drive.

2.  Click on the [Start] button. From [Settings], choose [Control Panel].

3.  Double click on [Display].

4.  Click on [Settings] and [Advanced].

5.  Click on [General] and from [Compatibility] select [Apply the new

display setting without restarting], then click on [Color Manage-
ment].

6.  Click [Add], and select [3 

1

/

2

 Floppy [A:]] as the file location.

7.  Choose the color profile that you would like to install, and click on

[Add].

8.  Choose the profile and click on [Set As Default].

9.  Click [OK], and close the window.

10. Remove the Utility Disk from the A drive.

• When using the ICC profile, please set the [WHITE BALANCE] to

[STD].

An arm based on the VESA standard can be attached to the monitor.
The arm must be purchased separately.

When choosing the arm to be installed please take note of the following

points.

• The arm should be compatible with the VESA standard, and there

must be a gap of 75mm 

u

 75mm between the screw holes on the sec-

tion to be attached.

•  The arm must not fall off or break off after being attached to the mon-

itor.

Note: Do not overly bend the cable or add extension cords as this

could lead to malfunction.

1.  Ensure that both the monitor and computer are switched off.

2.  Remove the AC adapter and the RGB signal cable.

3.  Press down on the stand and gently fold back the monitor.

Be sure to completely fold the monitor back to stopping point.

If it is attempted to install the arm while the monitor is not com-

pletely folded back, the monitor may suddenly fall, leading to mal-
function.

Be careful not to pinch your fingers.

4.  Being careful not to damage the monitor, spread out a soft cloth and

lay the monitor on it display-side down.

5. Attach the arm to the monitor with four screws.

6.  Connect the AC adapter and the RGB signal cable.

Information
The screws used to
attach the arm should be
M4 screws with a length
of 4 mm ~ 6 mm protrud-
ing from the surface to be
attached. Using any other
kind of screw may lead to
the monitor falling off or
damage to the internal
part of the monitor.

4 ~ 6 mm

Screw used to
attach arm

Arm

Part of monitor to
which arm is
attached