Sharp LL-P202V Handy Guide ▷ View online
SYSTEM REQUIREMENTS
TOUCH PANEL
To use the touch panel, the monitor must be connected to a computer using a
USB cable.
Touch panel operating conditions are as described below.
Computer PC/AT compatible computer with a USB 2.0 port and able to output a
resolution of 1920×1080
OS Windows 8(32 bit or 64 bit version), Windows 7(32 bit or 64 bit version),
Windows Vista(32 bit or 64 bit version)
• Windows 7 or later is recommended for touch action
• The touch panel operates with the standard Windows driver.
To use the touch panel, the monitor must be connected to a computer using a
USB cable.
Touch panel operating conditions are as described below.
Computer PC/AT compatible computer with a USB 2.0 port and able to output a
resolution of 1920×1080
OS Windows 8(32 bit or 64 bit version), Windows 7(32 bit or 64 bit version),
Windows Vista(32 bit or 64 bit version)
• Windows 7 or later is recommended for touch action
• The touch panel operates with the standard Windows driver.
SYSTEM REQUIREMENTS
INSTALLING THE TOUCH PANEL DRIVER
To use the touch panel in Windows Vista, you must install the touch panel driver on the CD-ROM (included).
If this driver software is already installed, uninstall it.
(Caution)
- This driver software is only for use with a landscape installation.
- This can only be done by a user with administrator authority.
- Do not install the touch panel driver on Windows 7 or later. Doing so will disable operations such as the multi touch
operation.
- If you are using a USB hub, use a self-powered hub (a hub capable of supplying a 500 mA current). The touch panel will
not operate
correctly if a bus-powered USB hub is used.
- The driver software is installed to the USB port that is connected to the touch panel. If the touch panel is reconnected to
a different USB
port on the computer, the driver software must be reinstalled.
- On occasion it may not be possible to use the touch panel after the computer is wakened from sleep mode. In this
event, disconnect and
then reconnect the USB cable that connects to the LCD monitor.
To use the touch panel in Windows Vista, you must install the touch panel driver on the CD-ROM (included).
If this driver software is already installed, uninstall it.
(Caution)
- This driver software is only for use with a landscape installation.
- This can only be done by a user with administrator authority.
- Do not install the touch panel driver on Windows 7 or later. Doing so will disable operations such as the multi touch
operation.
- If you are using a USB hub, use a self-powered hub (a hub capable of supplying a 500 mA current). The touch panel will
not operate
correctly if a bus-powered USB hub is used.
- The driver software is installed to the USB port that is connected to the touch panel. If the touch panel is reconnected to
a different USB
port on the computer, the driver software must be reinstalled.
- On occasion it may not be possible to use the touch panel after the computer is wakened from sleep mode. In this
event, disconnect and
then reconnect the USB cable that connects to the LCD monitor.
SYSTEM REQUIREMENTS
PEN SOFTWARE
Operating conditions for the included Pen Software are as described below. To install Pen Software, refer
to the Pen Software Operation
Manual. Pen Software is for use with monitors installed in landscape orientation.
Computer PC/AT compatible computer able to output a resolution of 1920 × 1080.
(CD-ROM driver required for software installation)
OS Windows 8(32 bit or 64 bit version), Windows 7(32 bit or 64 bit version), Windows Vista(32 bit or 64
bit version)
CPU Intel Celeron or AMD Sempron 1.6GHz or faster
Intel Core 2 Duo or AMD Athlon X2 2.8GHz or faster recommended
Memory At least 2GB free space on hard disc
At least 100MB(free space separately required for data storage)
Operating conditions for the included Pen Software are as described below. To install Pen Software, refer
to the Pen Software Operation
Manual. Pen Software is for use with monitors installed in landscape orientation.
Computer PC/AT compatible computer able to output a resolution of 1920 × 1080.
(CD-ROM driver required for software installation)
OS Windows 8(32 bit or 64 bit version), Windows 7(32 bit or 64 bit version), Windows Vista(32 bit or 64
bit version)
CPU Intel Celeron or AMD Sempron 1.6GHz or faster
Intel Core 2 Duo or AMD Athlon X2 2.8GHz or faster recommended
Memory At least 2GB free space on hard disc
At least 100MB(free space separately required for data storage)
LL-P202V
LL-S242A
PWB overview
IF-PWB
LED driver PWB unit
Click on the first or last page to see other LL-P202V service manuals if exist.