Sharp LL-P202V (serv.man2) Service Manual ▷ View online
LL-P202V/S242A IMPORTANT INFORMATION FOR SERVICING THE DISPLAY AND SOFTWARE 3 - 48
3) If success, display the following dialogs.
LL-P202V/S242A IMPORTANT INFORMATION FOR SERVICING THE DISPLAY AND SOFTWARE 3 - 49
■Log
1) Log format
1. Time series log
- Records all log data in time series and export them into the files like text data.
- Maximum 317 logs can be saved.
2. Accumulated count log
- Records the number of the accumulated occurrence of the specific error log and the UsageTime when the latest specific error
occurs.
(Example)
■Time series log ■Accumulated count log
“*” mark is displayed besides the error log.
LL-P202V/S242A IMPORTANT INFORMATION FOR SERVICING THE DISPLAY AND SOFTWARE 3 - 50
2) Detailed information about the log data.
1. Time series log
Contents Log
Elapsed time(hour)
* By one hour
The counter is stopped during the sleep state (by the key of the monitor).
Reset is performed when the monitor recovers from the sleep state (at
the timing of the screen is displayed).
When there is no other record before/after this log, this log is not counted.
(Count is not stopped.)
--- 008:00 ---
System start up by the AC Power ON
Start Bootup
Change the power state. (OFF/Sleep/Active)
Enter Key OFF Mode
Enter Sleep Mode
Enter Active Mode
Starts the Sleep mode by no signal.
Detect Sleep OFF
Record by key switch on the monitor
(OFF by the holding the key switch on the monitor
/Recover from the OFF state by pressing key switch on the monitor
/The menu is displayed by pressing key switch on the monitor)
Detect KEY OFF
Detect KEY ON
Detect Menu ON
Switch to the Touch mode
* When the menu is displayed (Detect Menu ON), “Set Touch Mode
(Pen+Finger)” is recorded without any operation when the monitor is not
in “Set Touch Mode (Pen+Finger)”
Set Touch Mode (Pen)
Set Touch Mode (Finger)
Set Touch Mode (Pen+Finger)
Connect / Disconnect digitizer pen
Detect Degitizer Pen Connect
Detect Degitizer Pen Disconnect
Detects the temperature change
(Backlight auto dimming level temperature /Alert/OFF/Low temperature
/Recover to the normal state)
* Detect Backlight Auto Dimming Level
Temperature
* Detect Alert Level Temperature
* Detect Power Off Level Temperature
* Detect Low Level Temperature
Detect Normal temp
Detects the backlight error.
* Detect BackLight Error
Detects the over current of USB/MHL/DP/ digitizer pen.
* Detect USB OverCurrent
* Detect MHL OverCurrent
* Detect DP OverCurrent
* Detect Pen OverCurrent
Exceeds the backlight continuous operating time (15h)
Detect Overrun
LL-P202V/S242A IMPORTANT INFORMATION FOR SERVICING THE DISPLAY AND SOFTWARE 3 - 51
3-17. Reset system log
■OUTLINE
The system log recorded on the Touch monitor is initialized.
■How to operate
1) Click Log Read button
Click on the first or last page to see other LL-P202V (serv.man2) service manuals if exist.