DOWNLOAD Sharp LL-172AW (serv.man2) Service Manual ↓ Size: 1.21 MB | Pages: 36 in PDF or view online for FREE

Installing monitor set-up information into Windows
XP, and setting the monitor's ICC profile as a
predetermined value.
This explanation assumes that the CD-ROM drive
is "D" drive.

1. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. Choose [Control

Panel].

3. Switch to "Classic View".
4. Double click on [Display].
5. Click on [Settings], [Advanced] and [Monitor].
6. Click on [Properties], [Driver] and [Update

Driver].

7. When [Hardware Update Wizard] appears,

check [Install from a list or specific location
[Advanced]] and click [Next].

8. Check [Don't search. I will choose the driver to

install.] and click [Next].

9. Click on [Have Disk], confirm that [Copy

manufacturer's files from:] is [D:], and click [OK].

10. Select the monitor from the list displayed and

click [Next].
If [has not passed Windows Logo testing...]
appears, click [Continue Anyway].

11. Confirm that the monitor's name appears on

the screen.

12. Click on [Finish].
13. Click on [Close].
14. Click [OK], and close the window.

Installing the monitor's ICC profile. (If the set-up
information has already been installed, so too has
the profile, and there is no need to install it.)
This explanation assumes that the CD-ROM drive
is "D" drive.

1. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings] and [Advanced].
5. Click on [General] and from [Compatibility]

select [Apply the new display setting without
restarting], then click on [Color Management].

6. Click [Add], and select CD-ROM as the file

location.

7. Choose the color profile that you would like to

install, and click on [Add].

8. Choose the profile and click on [Set As

Default].

9. Click [OK], and close the window.

- When using the ICC profile, set as follows:

- [DISPLAY MODE]: [STD] or [OFFICE]
- [WHITE BALANCE]: [STD]
- [GAMMA]: [0]

172AG_gb.PMD

3/24/2004, 11:44 AM

33

About the ColorSync profile
ColorSync is Apple Computer's color management
system and enables color reproduction
characteristics to be realized when used with a
compatible application. A ColorSync profile
describes the color characteristics of the LCD
monitor.

Notes:
- This monitor's ColorSync profile works with

MacOS 8.5 or above.

- When using the ColorSync profile, set as

follows:
- [DISPLAY MODE]: [STD] or [OFFICE]
- [WHITE BALANCE]: [STD]
- [GAMMA]: [0]

Notes:
- It is necessary to have PC Exchange or File

Exchange installed in your system.

- Depending on the type of computer or OS,

command names and methods may differ.
Please follow the computer's own operation
manual while reading this.

1. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2. Copy the profile to be used from the CD-ROM to

the ColorSync profile folder in the system folder.

3. Using the ColorSync on the control panel,

choose the profile to be used.

172AG_gb.PMD

3/24/2004, 11:44 AM

34

An arm or stand based on the VESA standard
(commercially available) can be attached to the
monitor. Procurement of the arm or stand is at the
customer's discretion.

Attachments must satisfy the following.
- Compatible with the VESA standard.
- Have a gap of 100 mm x 100 mm between the

screw holes on the section to be attached.

- Not be likely to fall off or break off after being

attached to the monitor.

- Be careful not to over bend the cable or add

extension cords as this could lead to malfunction.

- While following these instructions, please also

refer to the installation instructions in the
operation manual included with the arm or stand.

- Be careful not to get your fingers pinched

between the display and stand nor to let the
stand drop. These could lead to injury.

1. Remove the cables.
2. Spread out a soft cloth on a suitable horizontal

surface.

3. Being careful not to damage the monitor, gently

lay the monitor on it display-side down.
- For the LL-172G, extend the stand as long as

possible and lock it before positioning the
monitor. (p.13)

4. Remove the four screws and then remove the

stand from the monitor.

Notes:
- The stand is specially made for use with this

monitor. Once having removed the stand, never
attempt to attach it to another device.

- Once having removed the screws, store them

together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to a malfunction.

[LL-172G]

[LL-172A]

5. Attach the arm to the monitor with the four screws.

Note:
- The screws used to attach the arm should be M4

screws with a length of 4-5 mm protruding from
the surface to be attached. Using different
screws could cause the monitor to fall off or to be
internally damaged.

CAUTION!
Do not disassemble the stand. Parts may
spring out and cause injury.

CAUTION!
Store the stand of the LL-172G in its most
extended position.
When the stand is stored in a contracted
state, the lock may accidentally release
and the stand may abruptly extend,
causing injury.

Screw used to attach arm

Arm

Part of monitor to which arm is
attached

172AG_gb.PMD

3/24/2004, 11:44 AM

35

172AG_gb.PMD

3/24/2004, 11:44 AM

36